public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <robh@kernel.org>, <conor+dt@kernel.org>, <dlechner@baylibre.com>,
	<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-pwm@vger.kernel.org>
Subject: Re: [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling
Date: Sat, 23 Nov 2024 16:04:14 +0000	[thread overview]
Message-ID: <20241123160414.5238fa45@jic23-huawei> (raw)
In-Reply-To: <20241111121203.3699-7-antoniu.miclaus@analog.com>

On Mon, 11 Nov 2024 14:12:01 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add support for enabling/disabling oversampling.
As earlier, this is usually an oversample by N, not just a boolean.
If it is boolean for this device, then I assume there is a fixed
ratio.  Make the interface controlling between 1 and whatever that
ratio is.

Jonathan

> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> changes in v6:
>  - add support for oversampling enable/disable.
>  drivers/iio/adc/adi-axi-adc.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index 9bf967d5b730..8ec668f59c88 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -46,6 +46,7 @@
>  #define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
>  
>  #define ADI_AXI_ADC_REG_CNTRL_3			0x004c
> +#define   AD485X_CNTRL_3_CUSTOM_CTRL_OS_EN_MSK	BIT(2)
>  #define   AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK	GENMASK(1, 0)
>  #define   AD485X_PACKET_FORMAT_20BIT		0x0
>  #define   AD485X_PACKET_FORMAT_24BIT		0x1
> @@ -341,6 +342,14 @@ static int axi_adc_data_size_set(struct iio_backend *back, unsigned int size)
>  				  AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK, val);
>  }
>  
> +static int axi_adc_oversampling_en(struct iio_backend *back, bool en)
> +{
> +	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> +
> +	return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> +				  AD485X_CNTRL_3_CUSTOM_CTRL_OS_EN_MSK, en);
> +}
> +
>  static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
>  						 struct iio_dev *indio_dev)
>  {
> @@ -390,6 +399,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
>  	.chan_status = axi_adc_chan_status,
>  	.interface_type_get = axi_adc_interface_type_get,
>  	.data_size_set = axi_adc_data_size_set,
> +	.oversampling_en = axi_adc_oversampling_en,
>  	.debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
>  	.debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
>  };


  parent reply	other threads:[~2024-11-23 16:04 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-11 12:11 [PATCH v6 0/8] *** Add support for AD485x DAS Family *** Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 1/8] iio: backend: add API for interface get Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 2/8] iio: backend: add support for data size set Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 3/8] iio: backend: add API for oversampling Antoniu Miclaus
2024-11-11 15:41   ` Nuno Sá
2024-11-23 16:02     ` Jonathan Cameron
2024-11-23 16:05       ` Jonathan Cameron
2024-11-11 12:11 ` [PATCH v6 4/8] iio: adc: adi-axi-adc: add interface type Antoniu Miclaus
2024-11-11 12:12 ` [PATCH v6 5/8] iio: adc: adi-axi-adc: set data format Antoniu Miclaus
2024-11-12 20:11   ` David Lechner
2024-11-11 12:12 ` [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling Antoniu Miclaus
2024-11-12 20:12   ` David Lechner
2024-11-23 16:04   ` Jonathan Cameron [this message]
2024-11-11 12:12 ` [PATCH v6 7/8] dt-bindings: iio: adc: add ad4851 Antoniu Miclaus
2024-11-11 12:12 ` [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver Antoniu Miclaus
2024-11-12 20:02   ` David Lechner
2024-11-14 10:39     ` Miclaus, Antoniu
2024-11-14 14:47       ` David Lechner
2024-11-15 10:59         ` Miclaus, Antoniu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241123160414.5238fa45@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=antoniu.miclaus@analog.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox