From: Jonathan Cameron <jic23@kernel.org>
To: Tobias Sperling via B4 Relay
<devnull+tobias.sperling.softing.com@kernel.org>
Cc: tobias.sperling@softing.com, Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138
Date: Sat, 23 Nov 2024 16:53:54 +0000 [thread overview]
Message-ID: <20241123165354.0763cc1f@jic23-huawei> (raw)
In-Reply-To: <20241122-adc_ml-v1-1-0769f2e1bbc1@softing.com>
On Fri, 22 Nov 2024 16:15:36 +0100
Tobias Sperling via B4 Relay <devnull+tobias.sperling.softing.com@kernel.org> wrote:
> From: Tobias Sperling <tobias.sperling@softing.com>
>
> Add documentation for the driver of ADS7128 and ADS7138 12-bit, 8-channel
> analog-to-digital converters. These ADCs have a wide operating range and
> a wide feature set. Communication is based on the I2C interface.
>
> Signed-off-by: Tobias Sperling <tobias.sperling@softing.com>
Hi Tobias,
Welcome to IIO.
This should really have been a v2 to avoid confusion but good that b4-relay worked
for you.
Add a little on the differences you mention below to the patch description.
One comment inline.
Thanks,
Jonathan
> ---
> .../devicetree/bindings/iio/adc/ti,ads7138.yaml | 64 ++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..367d3b27cec3bc5800aac42c8a07497da7de4c1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/ti,ads7138.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ADS7128/ADS7138 analog-to-digital converter (ADC)
> +
> +maintainers:
> + - Tobias Sperling <tobias.sperling@softing.com>
> +
> +description: |
> + The ADS7128 and ADS7138 chips are 12-bit, 8 channel analog-to-digital
> + converters (ADC) with build-in digital window comparator (DWC), using the
> + I2C interface.
> + ADS7128 differs in the addition of further hardware features, like a
> + root-mean-square (RMS) and a zero-crossing-detect (ZCD) module, which are
> + not yet supported by the driver.
Don't mention the driver in a dt-binding. It's all about the hardware
not so much what we support.
So say what features it has, but not the bit about support.
> +
> + Datasheets:
> + https://www.ti.com/product/ADS7128
> + https://www.ti.com/product/ADS7138
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ads7128
> + - ti,ads7138
> +
> + reg:
> + maxItems: 1
> +
> + avdd-supply:
> + description:
> + The regulator used as analog supply voltage as well as reference voltage.
> +
> + interrupts:
> + description:
> + Interrupt on ALERT pin, triggers on low level.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - avdd-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@10 {
> + compatible = "ti,ads7138";
> + reg = <0x10>;
> + avdd-supply = <®_stb_3v3>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +...
>
next prev parent reply other threads:[~2024-11-23 16:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-22 15:15 [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs Tobias Sperling via B4 Relay
2024-11-22 15:15 ` [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138 Tobias Sperling via B4 Relay
2024-11-23 16:53 ` Jonathan Cameron [this message]
2024-11-26 7:27 ` Krzysztof Kozlowski
2024-11-22 15:15 ` [PATCH 2/2] iio: adc: Add driver for ADS7128 / ADS7138 Tobias Sperling via B4 Relay
2024-11-24 12:42 ` Jonathan Cameron
2025-02-03 16:57 ` AW: " Sperling, Tobias
2025-02-04 14:43 ` Jonathan Cameron
2025-02-04 15:50 ` Sperling, Tobias
2025-02-06 11:25 ` Jonathan Cameron
2024-11-23 16:51 ` [PATCH 0/2] Support for TI ADS7128 and ADS7138 ADCs Krzysztof Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2024-11-13 14:41 [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138 Sperling, Tobias
2024-11-15 17:36 ` Rob Herring
2024-11-18 13:43 ` Sperling, Tobias
2024-11-19 14:32 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241123165354.0763cc1f@jic23-huawei \
--to=jic23@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+tobias.sperling.softing.com@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tobias.sperling@softing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox