From: Heiko Stuebner <heiko@sntech.de>
To: vkoul@kernel.org, kishon@kernel.org
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
quentin.schulz@cherry.de, sebastian.reichel@collabora.com,
heiko@sntech.de, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dse@thaumatec.com, Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: [PATCH v4 1/2] dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
Date: Tue, 26 Nov 2024 14:17:34 +0100 [thread overview]
Message-ID: <20241126131736.465111-2-heiko@sntech.de> (raw)
In-Reply-To: <20241126131736.465111-1-heiko@sntech.de>
From: Heiko Stuebner <heiko.stuebner@cherry.de>
Add dt-binding schema for the MIPI C-/D-PHY found on
Rockchip RK3588 SoCs.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
.../phy/rockchip,rk3588-mipi-dcphy.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml
new file mode 100644
index 000000000000..c8ff5ba22a86
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3588-mipi-dcphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip MIPI D-/C-PHY with Samsung IP block
+
+maintainers:
+ - Guochun Huang <hero.huang@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3576-mipi-dcphy
+ - rockchip,rk3588-mipi-dcphy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 1
+ description: |
+ Argument is mode to operate in. Supported modes are:
+ - PHY_TYPE_DPHY
+ - PHY_TYPE_CPHY
+ See include/dt-bindings/phy/phy.h for constants.
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+
+ resets:
+ maxItems: 4
+
+ reset-names:
+ items:
+ - const: m_phy
+ - const: apb
+ - const: grf
+ - const: s_phy
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'mipi dcphy general register files'.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ phy@feda0000 {
+ compatible = "rockchip,rk3588-mipi-dcphy";
+ reg = <0x0 0xfeda0000 0x0 0x10000>;
+ clocks = <&cru PCLK_MIPI_DCPHY0>,
+ <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>;
+ clock-names = "pclk", "ref";
+ resets = <&cru SRST_M_MIPI_DCPHY0>,
+ <&cru SRST_P_MIPI_DCPHY0>,
+ <&cru SRST_P_MIPI_DCPHY0_GRF>,
+ <&cru SRST_S_MIPI_DCPHY0>;
+ reset-names = "m_phy", "apb", "grf", "s_phy";
+ rockchip,grf = <&mipidcphy0_grf>;
+ #phy-cells = <1>;
+ };
+ };
--
2.45.2
next prev parent reply other threads:[~2024-11-26 13:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-26 13:17 [PATCH v4 0/2] MIPI DSI phy for rk3588 Heiko Stuebner
2024-11-26 13:17 ` Heiko Stuebner [this message]
2024-11-26 16:02 ` [PATCH v4 1/2] dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema Sebastian Reichel
2024-11-26 17:44 ` Conor Dooley
2024-11-26 18:38 ` Heiko Stübner
2024-11-27 16:23 ` Conor Dooley
2024-11-26 13:17 ` [PATCH v4 2/2] phy: rockchip: Add Samsung MIPI D-/C-PHY driver Heiko Stuebner
2024-11-26 16:11 ` Sebastian Reichel
2024-11-28 9:13 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241126131736.465111-2-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dse@thaumatec.com \
--cc=heiko.stuebner@cherry.de \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).