From: Rob Herring <robh@kernel.org>
To: Joey Lu <a0987203069@gmail.com>
Cc: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, krzk+dt@kernel.org,
conor+dt@kernel.org, mcoquelin.stm32@gmail.com,
richardcochran@gmail.com, alexandre.torgue@foss.st.com,
joabreu@synopsys.com, ychuang3@nuvoton.com, schung@nuvoton.com,
yclu4@nuvoton.com, peppe.cavallaro@st.com,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH v4 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC
Date: Wed, 4 Dec 2024 08:27:22 -0600 [thread overview]
Message-ID: <20241204142722.GA177756-robh@kernel.org> (raw)
In-Reply-To: <20241202023643.75010-2-a0987203069@gmail.com>
On Mon, Dec 02, 2024 at 10:36:41AM +0800, Joey Lu wrote:
> Create initial schema for Nuvoton MA35 family Gigabit MAC.
>
> Signed-off-by: Joey Lu <a0987203069@gmail.com>
> ---
> .../bindings/net/nuvoton,ma35d1-dwmac.yaml | 134 ++++++++++++++++++
> .../devicetree/bindings/net/snps,dwmac.yaml | 1 +
> 2 files changed, 135 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
> new file mode 100644
> index 000000000000..e44abaf4da3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nuvoton,ma35d1-dwmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton DWMAC glue layer controller
> +
> +maintainers:
> + - Joey Lu <yclu4@nuvoton.com>
> +
> +description:
> + Nuvoton 10/100/1000Mbps Gigabit Ethernet MAC Controller is based on
> + Synopsys DesignWare MAC (version 3.73a).
> +
> +allOf:
> + - $ref: snps,dwmac.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - nuvoton,ma35d1-dwmac
> +
> + reg:
> + maxItems: 1
> + description:
> + Register range should be one of the GMAC interface.
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: MAC clock
> + - description: PTP clock
> +
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: ptp_ref
> +
> + nuvoton,sys:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to access syscon registers.
> + - description: GMAC interface ID.
> + enum:
> + - 0
> + - 1
> + description:
> + A phandle to the syscon with one argument that configures system registers
> + for MA35D1's two GMACs. The argument specifies the GMAC interface ID.
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: stmmaceth
> +
> + phy-mode:
> + enum:
> + - rmii
> + - rgmii
> + - rgmii-id
> + - rgmii-txid
> + - rgmii-rxid
> +
> + tx-internal-delay-ps:
> + default: 0
> + minimum: 0
> + maximum: 2000
> + description:
> + RGMII TX path delay used only when PHY operates in RGMII mode with
> + internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
> + Allowed values are from 0 to 2000.
> +
> + rx-internal-delay-ps:
> + default: 0
> + minimum: 0
> + maximum: 2000
> + description:
> + RGMII RX path delay used only when PHY operates in RGMII mode with
> + internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
> + Allowed values are from 0 to 2000.
> +
> + mdio:
> + $ref: /schemas/net/mdio.yaml#
Drop. snps,dwmac.yaml already has this.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
Drop all 4. Already required by snps,dwmac.yaml.
> + - clocks
> + - clock-names
> + - nuvoton,sys
> + - resets
> + - reset-names
> + - phy-mode
Drop this one too.
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> + #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
> + ethernet@40120000 {
> + compatible = "nuvoton,ma35d1-dwmac";
> + reg = <0x40120000 0x10000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
> + clock-names = "stmmaceth", "ptp_ref";
> +
> + nuvoton,sys = <&sys 0>;
> + resets = <&sys MA35D1_RESET_GMAC0>;
> + reset-names = "stmmaceth";
> +
> + phy-mode = "rgmii-id";
> + phy-handle = <ð_phy0>;
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethernet-phy@0 {
> + reg = <0>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index eb1f3ae41ab9..4bf59ab910cc 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -67,6 +67,7 @@ properties:
> - ingenic,x2000-mac
> - loongson,ls2k-dwmac
> - loongson,ls7a-dwmac
> + - nuvoton,ma35d1-dwmac
> - qcom,qcs404-ethqos
> - qcom,sa8775p-ethqos
> - qcom,sc8280xp-ethqos
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-12-04 14:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 2:36 [PATCH v4 0/3] Add support for Nuvoton MA35D1 GMAC Joey Lu
2024-12-02 2:36 ` [PATCH v4 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC Joey Lu
2024-12-04 14:27 ` Rob Herring [this message]
2024-12-06 3:19 ` Joey Lu
2024-12-02 2:36 ` [PATCH v4 2/3] arm64: dts: nuvoton: Add Ethernet nodes Joey Lu
2024-12-02 2:36 ` [PATCH v4 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family Joey Lu
2024-12-03 1:43 ` Andrew Lunn
[not found] ` <75eb13d7-b582-4056-b707-706865611706@gmail.com>
2024-12-03 14:58 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241204142722.GA177756-robh@kernel.org \
--to=robh@kernel.org \
--cc=a0987203069@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=richardcochran@gmail.com \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
--cc=yclu4@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).