[PATCH v3] ARM: dts: ti/omap: gta04: fix pm issues caused by spi module

[Andreas Kemnade <andreas@kemnade.info>]

Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/

The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.

Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.

Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage")
CC: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Changes in V3:
- use gpio mode instead of mode7 which is not safe mode in this special
  case

Changes in V2:
- instead of reenabling mcspi, do a fix more near the root of the
  problem

 arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
index 2ee3ddd640209..536070e80b2c6 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@@ -446,6 +446,7 @@ &omap3_pmx_core2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
 	hsusb2_2_pins: hsusb2-2-pins {
@@ -459,6 +460,15 @@ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_d
 		>;
 	};
 
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
-- 
2.39.2