Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615

[Bjorn Helgaas <helgaas@kernel.org>]

On Tue, Nov 12, 2024 at 08:31:33PM +0530, Krishna chaitanya chundru wrote:
> Add binding describing the Qualcomm PCIe switch, QPS615,
> which provides Ethernet MAC integrated to the 3rd downstream port
> and two downstream PCIe ports.

> +$defs:
> +  qps615-node:
> +    type: object
> +
> +    properties:
> +      qcom,l0s-entry-delay-ns:
> +        description: Aspm l0s entry delay.
> +
> +      qcom,l1-entry-delay-ns:
> +        description: Aspm l1 entry delay.

To match spec usage:
s/Aspm/ASPM/
s/l0s/L0s/
s/l1/L1/

Other than the fact that qps615 needs the driver to configure these,
there's nothing qcom-specific here, so I suggest the names should omit
"qcom" and include "aspm".

> +    pcie {
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +
> +        pcie@0 {
> +            device_type = "pci";
> +            reg = <0x0 0x0 0x0 0x0 0x0>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            ranges;
> +            bus-range = <0x01 0xff>;
> +
> +            pcie@0,0 {
> +                compatible = "pci1179,0623";
> +                reg = <0x10000 0x0 0x0 0x0 0x0>;
> +                device_type = "pci";
> +                #address-cells = <3>;
> +                #size-cells = <2>;
> +                ranges;
> +                bus-range = <0x02 0xff>;

This binding describes a switch.  I don't think bus-range should
appear here at all because it is not a feature of the hardware (unless
the switch ports are broken and their Secondary/Subordinate Bus
Numbers are hard-wired).

The Primary/Secondary/Subordinate Bus Numbers of all switch ports
should be writable and the PCI core knows how to manage them.

Bjorn