[PATCH v10 0/5] Add MSM8917/PM8937/Redmi 5A

[PATCH v10 0/5] Add MSM8917/PM8937/Redmi 5A

[Barnabás Czémán]

This patch series add support for MSM8917 soc with PM8937 and
Xiaomi Redmi 5A (riva).

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
Changes in v10:
- msm8917: sdc1 cmd_on, cmd_off change bias-disable to bias-pull-up
- Remove applied patches.
- Link to v9: https://lore.kernel.org/r/20241215-msm8917-v9-0-bacaa26f3eef@mainlining.org

Changes in v9:
- msm8917:
 - add some empty lines for separating pins more
 - order compatible, reg, ranges properties
- Link to v8: https://lore.kernel.org/r/20241211-msm8917-v8-0-197acc042036@mainlining.org

Changes in v8:
- pm8937, msm8917, msm8917-xiaomi-riva: remove unused includes
- Link to v7: https://lore.kernel.org/r/20241124-msm8917-v7-0-612729834656@mainlining.org

Changes in v7:
- msm8917-xiaomi-riva:
  - Add pinctrls for used GPIO pins.
  - Use interrupts-extend for charger.
  - Order properies.
- Link to v6: https://lore.kernel.org/r/20241113-msm8917-v6-0-c348fb599fef@mainlining.org

Changes in v6:
- msm8917:
  - Consolidate SDC pins, remove sdc2-cd-on/off pins.
  - Remove cluster-sleep-0 and cluster-sleep-1
  and rename cluster-sleep-2 to cluster-sleep-0.
  - Fix spi, i2c and related pinctrl namings.
- msm8917-xiaomi-riva: follow i2c name changes.
- Link to v5: https://lore.kernel.org/r/20241112-msm8917-v5-0-3ca34d33191b@mainlining.org

Changes in v5:
- msm8917:
  - Remove aliases.
  - Rename spi, i2c labels and pins.
  - Remove clock-frequency from timers
  - Remove unused mpss_mem region.
  - Use mboxes where it can be used, only smd-edge uses qcom,ipc.
- msm8917-xiaomi-riva: Follow i2c label changes.
- Link to v4: https://lore.kernel.org/r/20241109-msm8917-v4-0-8be9904792ab@mainlining.org

Changes in v4:
- msm8917 pinctrl: Fix gpio regexp in the schema.
- msm8937 tsens: Rename ops_msm8976 to ops_common and use it for msm8937.
- msm8917: fix address padding, naming and ordering, remove polling-delays.
- Remove applied patches from the series.
- Link to v3: https://lore.kernel.org/r/20241107-msm8917-v3-0-6ddc5acd978b@mainlining.org

Changes in v3:
- msm8917-xiaomi-riva: Fix issues addressed by Konrad.
- msm8917: Fix node addresses, orders of some properties.
- pm8937: simplify vadc channels.
- msm8917 pinctrl: Fix schema issues addressed by Krzysztof. 
- Remove applied tcsr patch from this series.
- Reword some commit title.
- Link to v2: https://lore.kernel.org/r/20241031-msm8917-v2-0-8a075faa89b1@mainlining.org

Changes in v2:
- Add msm8937 tsens support.
- Fix issues addressed by reviews.
- Link to v1: https://lore.kernel.org/r/20241019-msm8917-v1-0-f1f3ca1d88e5@mainlining.org

---
Barnabás Czémán (3):
      dt-bindings: nvmem: Add compatible for MS8917
      dt-bindings: arm: qcom: Add Xiaomi Redmi 5A
      arm64: dts: qcom: Add Xiaomi Redmi 5A

Dang Huynh (1):
      arm64: dts: qcom: Add PM8937 PMIC

Otto Pflüger (1):
      arm64: dts: qcom: Add initial support for MSM8917

 Documentation/devicetree/bindings/arm/qcom.yaml    |    7 +
 .../devicetree/bindings/nvmem/qcom,qfprom.yaml     |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts   |  333 ++++
 arch/arm64/boot/dts/qcom/msm8917.dtsi              | 1954 ++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8937.dtsi               |  150 ++
 6 files changed, 2446 insertions(+)
---
base-commit: 8503810115fbff903f626adc0788daa048302bc0
change-id: 20241019-msm8917-17c3d0ff4a52

Best regards,
-- 
Barnabás Czémán <barnabas.czeman@mainlining.org>

[PATCH v10 1/5] arm64: dts: qcom: Add PM8937 PMIC

[Barnabás Czémán]

From: Dang Huynh <danct12@riseup.net>

The PM8937 features integrated peripherals like ADC, GPIO controller,
MPPs, PON keys and others.

Add the device tree so that any boards with this PMIC can use it.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/pm8937.dtsi | 150 +++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8937.dtsi b/arch/arm64/boot/dts/qcom/pm8937.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..42b3575b36ff4d37df11ccb5ed68e965e3716300
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8937.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8937-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8937_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8937_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8937_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8937_gpios: gpio@c000 {
+			compatible = "qcom,pm8937-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_mpps: mpps@a000 {
+			compatible = "qcom,pm8937-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8937_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8937_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0 0x31 0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8937_spmi_regulators: regulators {
+			compatible = "qcom,pm8937-regulators";
+		};
+	};
+};

-- 
2.47.1

[PATCH v10 2/5] dt-bindings: nvmem: Add compatible for MS8917

[Barnabás Czémán]

Document the QFPROM block found on MSM8917.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 80845c722ae46611c722effeaaf014a0caf76e4a..4d81f98ed37a3a12f01d444dbfa77badcc09c22d 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -26,6 +26,7 @@ properties:
           - qcom,ipq9574-qfprom
           - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
+          - qcom,msm8917-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
           - qcom,msm8996-qfprom

-- 
2.47.1

[PATCH v10 3/5] arm64: dts: qcom: Add initial support for MSM8917

[Barnabás Czémán]

From: Otto Pflüger <otto.pflueger@abscue.de>

Add initial support for MSM8917 SoC.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
[reword commit, rebase, fix schema errors]
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/msm8917.dtsi | 1954 +++++++++++++++++++++++++++++++++
 1 file changed, 1954 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..7bd6925029eeb9d6d49a99f8686181e926258cab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi
@@ -0,0 +1,1954 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000053>;
+				entry-latency-us = <700>;
+				exit-latency-us = <1000>;
+				min-residency-us = <6500>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+
+		cpu_opp_table: opp-table-cpu {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-960000000 {
+				opp-hz = /bits/ 64 <960000000>;
+			};
+
+			opp-1094400000 {
+				opp-hz = /bits/ 64 <1094400000>;
+			};
+
+			opp-1248000000 {
+				opp-hz = /bits/ 64 <1248000000>;
+			};
+
+			opp-1401600000 {
+				opp-hz = /bits/ 64 <1401600000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>;
+		};
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8917-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8917", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8917", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: qseecom@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8917-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230{
+				reg = <0x230 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 1>;
+				bits = <2 6>;
+			};
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8917";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8917", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8917-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0 0x1000>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-306.32", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gfx3d";
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+
+			iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-598000000 {
+					opp-hz = /bits/ 64 <598000000>;
+				};
+
+				opp-523200000 {
+					opp-hz = /bits/ 64 <523200000>;
+				};
+
+				opp-484800000 {
+					opp-hz = /bits/ 64 <484800000>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>,
+			      <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>,
+			      <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8917_VDDCX>,
+					<&rpmpd MSM8917_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_EARLY>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b016000 0x40>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+			#clock-cells = <0>;
+			operating-points-v2 = <&pll_opp_table>;
+
+			pll_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-960000000 {
+					opp-hz = /bits/ 64 <960000000>;
+				};
+
+				opp-1094400000 {
+					opp-hz = /bits/ 64 <1094400000>;
+				};
+
+				opp-1248000000 {
+					opp-hz = /bits/ 64 <1248000000>;
+				};
+
+				opp-1401600000 {
+				      opp-hz = /bits/ 64 <1401600000>;
+				};
+			};
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};

-- 
2.47.1

[PATCH v10 4/5] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A

[Barnabás Czémán]

Document Xiaomi Remi 5A (riva).
Add qcom,msm8917 for msm-id, board-id allow-list.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d394dffe3fba5a396b85a6093f34e9ef62b6f9cc..fa5e70cee0c6b7cc20f49005ebced0b9389ab910 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -37,6 +37,7 @@ description: |
         msm8226
         msm8660
         msm8916
+        msm8917
         msm8926
         msm8929
         msm8939
@@ -264,6 +265,11 @@ properties:
               - yiming,uz801-v3
           - const: qcom,msm8916
 
+      - items:
+          - enum:
+              - xiaomi,riva
+          - const: qcom,msm8917
+
       - items:
           - enum:
               - motorola,potter
@@ -1199,6 +1205,7 @@ allOf:
               - qcom,apq8026
               - qcom,apq8094
               - qcom,apq8096
+              - qcom,msm8917
               - qcom,msm8939
               - qcom,msm8953
               - qcom,msm8956

-- 
2.47.1

[PATCH v10 5/5] arm64: dts: qcom: Add Xiaomi Redmi 5A

[Barnabás Czémán]

Add initial support for Xiaomi Redmi 5A (riva).

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/Makefile                |   1 +
 arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 333 +++++++++++++++++++++++
 2 files changed, 334 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4686f2a8ddd897227360b4de48a0618499ad463e..ee9b262b0e0fc3ec9d6515174c33f8b69b524842 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86518.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86528.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f1d22535fedd94467ba3f0a88b2110ce5360e7e1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 5A (riva)";
+	compatible = "xiaomi,riva", "qcom,msm8917";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8917 0>;
+	qcom,board-id = <0x1000b 2>, <0x2000b 2>;
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		energy-full-design-microwatt-hours = <11500000>;
+		constant-charge-current-max-microamp = <1000000>;
+		constant-charge-voltage-max-microvolt = <4400000>;
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <60000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer_mem: memory@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	bq27426@55 {
+		compatible = "ti,bq27426";
+		reg = <0x55>;
+		monitored-battery = <&battery>;
+	};
+
+	bq25601@6b{
+		compatible = "ti,bq25601";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&bq25601_int_default>;
+		pinctrl-names = "default";
+		input-voltage-limit-microvolt = <4400000>;
+		input-current-limit-microamp = <1000000>;
+		monitored-battery = <&battery>;
+	};
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	bq25601_int_default: bq25601-int-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};

-- 
2.47.1

Re: [PATCH v10 3/5] arm64: dts: qcom: Add initial support for MSM8917

[Stephan Gerhold]

On Fri, Dec 20, 2024 at 12:26:55PM +0100, Barnabás Czémán wrote:
> From: Otto Pflüger <otto.pflueger@abscue.de>
> 
> Add initial support for MSM8917 SoC.
> 
> Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
> [reword commit, rebase, fix schema errors]
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8917.dtsi | 1954 +++++++++++++++++++++++++++++++++
>  1 file changed, 1954 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..7bd6925029eeb9d6d49a99f8686181e926258cab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi
> @@ -0,0 +1,1954 @@
> [...]
> +		a53pll: clock@b016000 {
> +			compatible = "qcom,msm8939-a53pll";
> +			reg = <0x0b016000 0x40>;
> +			clocks = <&xo_board>;
> +			clock-names = "xo";
> +			#clock-cells = <0>;
> +			operating-points-v2 = <&pll_opp_table>;
> +
> +			pll_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-960000000 {
> +					opp-hz = /bits/ 64 <960000000>;
> +				};
> +
> +				opp-1094400000 {
> +					opp-hz = /bits/ 64 <1094400000>;
> +				};
> +
> +				opp-1248000000 {
> +					opp-hz = /bits/ 64 <1248000000>;
> +				};
> +
> +				opp-1401600000 {
> +				      opp-hz = /bits/ 64 <1401600000>;

Nitpick: indentation is off here.

Anyway, this looks really nice overall now. Thanks for doing all the
cleanup! FWIW:

Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>

Thanks,
Stephan