Re: [PATCH 2/2] arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant

[Bjorn Helgaas <helgaas@kernel.org>]

On Mon, Jul 15, 2024 at 09:40:41PM +0200, Patrick Wildt wrote:
> Describe the bus topology for PCIe domain 4 and add the ath12k
> calibration variant so that the board file (calibration data) can be
> loaded.

> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3085,6 +3085,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>  			phy-names = "pciephy";
>  
>  			status = "disabled";
> +
> +			pcie4_port0: pcie@0 {
> +				device_type = "pci";
> +				reg = <0x0 0x0 0x0 0x0 0x0>;
> +				bus-range = <0x01 0xff>;

Hi Patrick, what's the purpose of this bus-range?  IIUC this describes
a Root Port, where we can read and configure the secondary/subordinate
bus numbers from the RP config space, so it seems like we don't need
to describe them here.

> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				ranges;
> +			};
>  		};
>  
>  		pcie4_phy: phy@1c0e000 {
> -- 
> 2.45.2
>