From: Vasiliy Doylov via B4 Relay <devnull+nekodevelopper.gmail.com@kernel.org>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Vasiliy Doylov <nekodevelopper@gmail.com>
Subject: [PATCH 3/4] iio: accel: mc3230: add mc3510c support
Date: Sat, 11 Jan 2025 23:11:08 +0300 [thread overview]
Message-ID: <20250111-mainlining-mc3510c-v1-3-57be503addf8@gmail.com> (raw)
In-Reply-To: <20250111-mainlining-mc3510c-v1-0-57be503addf8@gmail.com>
From: Vasiliy Doylov <nekodevelopper@gmail.com>
This commit integrates support for the mc3510c into the mc3230 driver.
Tested on Huawei MediaPad T3 10 (huawei-agassi)
Signed-off-by: Vasiliy Doylov <nekodevelopper@gmail.com>
---
drivers/iio/accel/mc3230.c | 55 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 44 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/accel/mc3230.c b/drivers/iio/accel/mc3230.c
index 3cad6f2d7a2a79df38f90e5656763f6ed019a920..ebbb96c658d87a83007c7c3c7212ce9ebf039963 100644
--- a/drivers/iio/accel/mc3230.c
+++ b/drivers/iio/accel/mc3230.c
@@ -22,20 +22,41 @@
#define MC3230_MODE_OPCON_STANDBY 0x03
#define MC3230_REG_CHIP_ID 0x18
-#define MC3230_CHIP_ID 0x01
-
#define MC3230_REG_PRODUCT_CODE 0x3b
-#define MC3230_PRODUCT_CODE 0x19
/*
* The accelerometer has one measurement range:
*
* -1.5g - +1.5g (8-bit, signed)
*
- * scale = (1.5 + 1.5) * 9.81 / (2^8 - 1) = 0.115411765
*/
-static const int mc3230_nscale = 115411765;
+enum mc3xxx_chips {
+ MC3230,
+ MC3510C,
+};
+
+struct mc3xxx_chip_info {
+ const char *name;
+ const u8 chip_id;
+ const u8 product_code;
+ const int scale;
+};
+
+static struct mc3xxx_chip_info mc3xxx_chip_info_tbl[] = {
+ [MC3230] = {
+ .name = "mc3230",
+ .chip_id = 0x01,
+ .product_code = 0x19,
+ .scale = 115411765, // (1.5 + 1.5) * 9.81 / (2^8 - 1) = 0.115411765
+ },
+ [MC3510C] = {
+ .name = "mc3510c",
+ .chip_id = 0x23,
+ .product_code = 0x10,
+ .scale = 625000000, // Was obtained empirically
+ },
+};
#define MC3230_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
@@ -50,6 +71,7 @@ static const int mc3230_nscale = 115411765;
struct mc3230_data {
struct i2c_client *client;
struct iio_mount_matrix orientation;
+ const struct mc3xxx_chip_info *chip_info;
};
static const struct iio_mount_matrix *
@@ -111,7 +133,7 @@ static int mc3230_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
- *val2 = mc3230_nscale;
+ *val2 = data->chip_info->scale;
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
@@ -127,15 +149,23 @@ static int mc3230_probe(struct i2c_client *client)
int ret;
struct iio_dev *indio_dev;
struct mc3230_data *data;
+ const struct mc3xxx_chip_info *chip_info;
+ chip_info = i2c_get_match_data(client);
/* First check chip-id and product-id */
ret = i2c_smbus_read_byte_data(client, MC3230_REG_CHIP_ID);
- if (ret != MC3230_CHIP_ID)
+ if (ret != chip_info->chip_id) {
+ dev_err(&client->dev,
+ "chip id check fail: 0x%x != 0x%x !\n", ret, chip_info->chip_id);
return (ret < 0) ? ret : -ENODEV;
+ }
ret = i2c_smbus_read_byte_data(client, MC3230_REG_PRODUCT_CODE);
- if (ret != MC3230_PRODUCT_CODE)
+ if (ret != chip_info->product_code) {
+ dev_err(&client->dev,
+ "product code check fail: 0x%x != 0x%x !\n", ret, chip_info->product_code);
return (ret < 0) ? ret : -ENODEV;
+ }
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev) {
@@ -145,10 +175,11 @@ static int mc3230_probe(struct i2c_client *client)
data = iio_priv(indio_dev);
data->client = client;
+ data->chip_info = chip_info;
i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mc3230_info;
- indio_dev->name = "mc3230";
+ indio_dev->name = chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = mc3230_channels;
indio_dev->num_channels = ARRAY_SIZE(mc3230_channels);
@@ -200,13 +231,15 @@ static int mc3230_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(mc3230_pm_ops, mc3230_suspend, mc3230_resume);
static const struct i2c_device_id mc3230_i2c_id[] = {
- { "mc3230" },
+ { "mc3230", (kernel_ulong_t)&mc3xxx_chip_info_tbl[MC3230] },
+ { "mc3510c", (kernel_ulong_t)&mc3xxx_chip_info_tbl[MC3510C] },
{}
};
MODULE_DEVICE_TABLE(i2c, mc3230_i2c_id);
static const struct of_device_id mc3230_of_match[] = {
- { .compatible = "mcube,mc3230" },
+ { .compatible = "mcube,mc3230", &mc3xxx_chip_info_tbl[MC3230] },
+ { .compatible = "mcube,mc3510c", &mc3xxx_chip_info_tbl[MC3510C] },
{ },
};
MODULE_DEVICE_TABLE(of, mc3230_of_match);
--
2.47.1
next prev parent reply other threads:[~2025-01-11 20:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-11 20:11 [PATCH 0/4] iio: accel: mc3230: add mount matrix, of match and mc3510c support Vasiliy Doylov via B4 Relay
2025-01-11 20:11 ` [PATCH 1/4] iio: accel: mc3230: add mount matrix support Vasiliy Doylov via B4 Relay
2025-01-12 10:48 ` Jonathan Cameron
2025-01-11 20:11 ` [PATCH 2/4] iio: accel: mc3230: add OF match table Vasiliy Doylov via B4 Relay
2025-01-11 23:07 ` Markuss Broks
2025-01-12 10:42 ` Jonathan Cameron
2025-01-12 10:46 ` Jonathan Cameron
2025-01-11 20:11 ` Vasiliy Doylov via B4 Relay [this message]
2025-01-11 23:04 ` [PATCH 3/4] iio: accel: mc3230: add mc3510c support Markuss Broks
2025-01-12 10:52 ` Jonathan Cameron
2025-01-12 11:01 ` Jonathan Cameron
2025-01-11 20:11 ` [PATCH 4/4] dt-bindings: iio: accel: mc3230: document mc3510c Vasiliy Doylov via B4 Relay
2025-01-11 22:46 ` Markuss Broks
2025-01-12 11:03 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250111-mainlining-mc3510c-v1-3-57be503addf8@gmail.com \
--to=devnull+nekodevelopper.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nekodevelopper@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).