Re: [PATCH v1 1/2] riscv: dts: starfive: jh7110: pciephy0 USB 3.0 configuration registers

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1886 bytes --]

On Wed, Jan 15, 2025 at 10:58:39AM +0000, Minda Chen wrote:
> 
> 
> > 
> > On Tue, Jan 14, 2025 at 05:42:28AM +0000, Minda Chen wrote:
> > >
> > >
> > > >
> > > > On Thu, Jan 02, 2025 at 10:37:36AM -0800, E Shattow wrote:
> > > > > StarFive JH7110 contains a Cadence USB2.0+USB3.0 controller IP
> > > > > block that may exclusively use pciephy0 for USB3.0 connectivity.
> > > > > Add the register offsets for the driver to enable/disable USB3.0 on
> > pciephy0.
> > > > >
> > > > > Signed-off-by: E Shattow <e@freeshell.de>
> > > > > ---
> > > > >  arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 ++
> > > > >  1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > > > b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > > > index 0d8339357bad..75ff07303e8b 100644
> > > > > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > > > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > > > @@ -611,6 +611,8 @@ usbphy0: phy@10200000 {
> > > > >  		pciephy0: phy@10210000 {
> > > > >  			compatible = "starfive,jh7110-pcie-phy";
> > > > >  			reg = <0x0 0x10210000 0x0 0x10000>;
> > > > > +			starfive,sys-syscon = <&sys_syscon 0x18>;
> > > > > +			starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
> > > >
> > > > Why weren't these added in the first place? Minda, do you know?
> > > >
> > > The driver only require to set syscon register while the PHY attach to
> > > Cadence USB.(star64 board case) The PHY default attach to PCIe0, VF2 board
> > do not set any setting. So I don't set it.
> > 
> > Does this mean that the change should be made in files where it will only affect
> > non-VF2 boards, or is it harmless if applied to the VF2 also?
> Harmless. The PCIe PHY driver still set the PCIe mode syscon setting.

Okay, I'll pick this up after the merge window, pending an Ack from
Emil.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]