From: Rob Herring <robh@kernel.org>
To: Robert Budai <robert.budai@analog.com>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com,
nuno.sa@analog.com, ramona.gradinariu@analog.com,
antoniu.miclaus@analog.com, jic23@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, corbet@lwn.net, lanzano.alex@gmail.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH v5 4/6] dt-bindings: iio: Add adis16550 bindings
Date: Wed, 29 Jan 2025 09:30:27 -0600 [thread overview]
Message-ID: <20250129153027.GA2121051-robh@kernel.org> (raw)
In-Reply-To: <20250129082053.19077-5-robert.budai@analog.com>
On Wed, Jan 29, 2025 at 10:20:44AM +0200, Robert Budai wrote:
> Document the ADIS16550 device devicetree bindings.
>
> Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
> Signed-off-by: Robert Budai <robert.budai@analog.com>
> ---
>
> v5:
> - removed sync-mode binding
> - added binding for external clock frequency
> - removed adis16550w
>
> .../bindings/iio/imu/adi,adis16550.yaml | 80 +++++++++++++++++++
> MAINTAINERS | 9 +++
> 2 files changed, 89 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> new file mode 100644
> index 000000000000..4e9406168782
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
blank line
> +title: Analog Devices ADIS16550 and similar IMUs
blank line
> +maintainers:
> + - Nuno Sa <nuno.sa@analog.com>
> + - Ramona Gradinariu <ramona.gradinariu@analog.com>
> + - Antoniu Miclaus <antoniu.miclaus@analog.com>
blank line
> +properties:
> + compatible:
> + enum:
> + - adi,adis16550
> + - adi,adis16550w
blank line
> + reg:
> + maxItems: 1
blank line
> + spi-cpha: true
> + spi-cpol: true
blank line
> + spi-max-frequency:
> + maximum: 15000000
blank line
> + vdd-supply: true
blank line
> + interrupts:
> + maxItems: 1
blank line
And so on. IOW, follow the style you see in *every* other schema doc.
> + reset-gpios:
> + description:
> + Must be the device tree identifier of the RESET pin. If specified,
> + it will be asserted during driver probe. As the line is active low,
> + it should be marked GPIO_ACTIVE_LOW.
> + maxItems: 1
> + clocks:
> + description: If not provided, then the internal clock is used.
> + maxItems: 1
> + clock-frequency:
> + description: Clock frequency in Hz when an external clock is used.
> + oneOf:
> + - type: integer
Drop 'type'
> + minimum: 1
> + maximum: 128
> + - type: integer
Drop 'type'
> + minimum: 3000
> + maximum: 4500
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - spi-cpha
> + - spi-cpol
> + - spi-max-frequency
> + - vdd-supply
> +
> +allOf:
> + - if:
> + properties:
> + clocks:
> + maxItems: 1
clocks doesn't have to be present for this to be true. Hence the
failure. But this can all be expressed as:
dependentRequired:
clock: [clock-frequency]
> + then:
> + required:
> + - clock-frequency
> +
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +additionalProperties: false
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + imu@0 {
> + compatible = "adi,adis16550";
> + reg = <0>;
> + spi-max-frequency = <15000000>;
> + spi-cpol;
> + spi-cpha;
> + vdd-supply = <&vdd>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aeb5f3cc58a1..5c59a183cd3f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1479,6 +1479,15 @@ W: https://ez.analog.com/linux-software-drivers
> F: Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
> F: drivers/iio/imu/adis16475.c
>
> +ANALOG DEVICES INC ADIS16550 DRIVER
> +M: Nuno Sa <nuno.sa@analog.com>
> +M: Ramona Gradinariu <ramona.gradinariu@analog.com>
> +M: Antoniu Miclaus <antoniu.miclaus@analog.com>
> +L: linux-iio@vger.kernel.org
> +S: Supported
> +W: https://ez.analog.com/linux-software-drivers
> +F: Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
> +
> ANALOG DEVICES INC ADM1177 DRIVER
> M: Michael Hennerich <Michael.Hennerich@analog.com>
> L: linux-hwmon@vger.kernel.org
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-01-29 15:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-29 8:20 [PATCH v5 0/6] Add support for ADIS16550 and ADIS16550W Robert Budai
2025-01-29 8:20 ` [PATCH v5 1/6] iio: imu: adis: Add custom ops struct Robert Budai
2025-02-01 14:45 ` Jonathan Cameron
2025-01-29 8:20 ` [PATCH v5 2/6] iio: imu: adis: Add reset to custom ops Robert Budai
2025-01-29 8:20 ` [PATCH v5 3/6] iio: imu: adis: Add DIAG_STAT register size Robert Budai
2025-02-01 14:47 ` Jonathan Cameron
2025-01-29 8:20 ` [PATCH v5 4/6] dt-bindings: iio: Add adis16550 bindings Robert Budai
2025-01-29 9:28 ` Rob Herring (Arm)
2025-01-29 15:30 ` Rob Herring [this message]
2025-01-29 8:20 ` [PATCH v5 5/6] iio: imu: adis16550: add adis16550 support Robert Budai
2025-02-01 15:21 ` Jonathan Cameron
2025-01-29 8:20 ` [PATCH v5 6/6] docs: iio: add documentation for adis16550 driver Robert Budai
2025-02-01 15:24 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250129153027.GA2121051-robh@kernel.org \
--to=robh@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lanzano.alex@gmail.com \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=ramona.gradinariu@analog.com \
--cc=robert.budai@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).