From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
Lorenzo Bianconi <lorenzo@kernel.org>
Subject: [PATCH] arm64: dts: Introduce more nodes to EN7581 SoC evaluation board
Date: Sat, 01 Feb 2025 15:39:48 +0100 [thread overview]
Message-ID: <20250201-en7581-dts-spi-pinctrl-v1-1-aaa4a9dfc4a6@kernel.org> (raw)
Add the following nodes to EN7581 SoC and EN7581 evaluation board:
- clock controller
- rng controller
- pinctrl
- i2c controllers
- spi nand controller
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
arch/arm64/boot/dts/airoha/en7581-evb.dts | 8 +++
arch/arm64/boot/dts/airoha/en7581.dtsi | 90 +++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
index cf58e43dd5b21dbf4f64e305a4b4a2daee100858..1126da4b795f5d5df9725ec4d75cd9353b011710 100644
--- a/arch/arm64/boot/dts/airoha/en7581-evb.dts
+++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -24,3 +24,11 @@ memory@80000000 {
reg = <0x0 0x80000000 0x2 0x00000000>;
};
};
+
+&i2c0 {
+ status = "okay";
+};
+
+&snfi {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
index 55eb1762fb11364877695960f5a2d3e42caf8611..b1cf650efd78c6c20d19e7f18c204cf5862215c0 100644
--- a/arch/arm64/boot/dts/airoha/en7581.dtsi
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
/ {
interrupt-parent = <&gic>;
@@ -150,5 +151,94 @@ uart1: serial@1fbf0000 {
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <1843200>;
};
+
+ scuclk: clock-controller@1fa20000 {
+ compatible = "airoha,en7581-scu";
+ reg = <0x0 0x1fb00000 0x0 0x970>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ rng@1faa1000 {
+ compatible = "airoha,en7581-trng";
+ reg = <0x0 0x1faa1000 0x0 0xc04>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ system-controller@1fbf0200 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1fbf0200 0x0 0xc0>;
+
+ en7581_pinctrl: pinctrl {
+ compatible = "airoha,en7581-pinctrl";
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ i2cclock: i2cclock@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+
+ /* 20 MHz */
+ clock-frequency = <20000000>;
+ };
+
+ i2c0: i2c0@1fbf8000 {
+ compatible = "mediatek,mt7621-i2c";
+ reg = <0x0 0x1fbf8000 0x0 0x100>;
+
+ clocks = <&i2cclock>;
+
+ /* 100 kHz */
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disable";
+ };
+
+ i2c1: i2c1@1fbf8100 {
+ compatible = "mediatek,mt7621-i2c";
+ reg = <0x0 0x1fbf8100 0x0 0x100>;
+
+ clocks = <&i2cclock>;
+
+ /* 100 kHz */
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disable";
+ };
+
+ snfi: spi@1fa10000 {
+ compatible = "airoha,en7581-snand";
+ reg = <0x0 0x1fa10000 0x0 0x140>,
+ <0x0 0x1fa11000 0x0 0x160>;
+
+ clocks = <&scuclk EN7523_CLK_SPI>;
+ clock-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ spi_nand: nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <2>;
+ };
+ };
};
};
---
base-commit: 7605336e9d136c14c94482ce7385de783f2f748e
change-id: 20250201-en7581-dts-spi-pinctrl-4160b825ca9d
Best regards,
--
Lorenzo Bianconi <lorenzo@kernel.org>
next reply other threads:[~2025-02-01 14:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-01 14:39 Lorenzo Bianconi [this message]
2025-02-03 15:37 ` [PATCH] arm64: dts: Introduce more nodes to EN7581 SoC evaluation board Rob Herring (Arm)
2025-02-03 16:04 ` Krzysztof Kozlowski
2025-02-03 16:06 ` Krzysztof Kozlowski
2025-02-04 16:15 ` Lorenzo Bianconi
2025-02-05 7:34 ` Krzysztof Kozlowski
2025-02-05 8:22 ` Lorenzo Bianconi
2025-02-03 18:41 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250201-en7581-dts-spi-pinctrl-v1-1-aaa4a9dfc4a6@kernel.org \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).