Re: [PATCH v6 0/3] ADF4371 refin mode and doubler support

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 27 Jan 2025 12:10:20 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add support for selecting between single-ended and differential
> reference input. By default the single-ended input is enabled.
> 
> Input frequency boundaries are change based on the mode selected
> (single-ended/differential).
> 
> Add support for the reference doubler. This feature is enabled
> automatically to improve noise performance if the input frequency
> is within the accepted range.
Applied to the togreg branch of iio.git with fix to patch 2.
I'll be rebasing that tree on rc1 when available so until then only
pushed out as testing.

Thanks,

Jonathan

> 
> Antoniu Miclaus (3):
>   dt-bindings: iio: adf4371: add refin mode
>   iio: frequency: adf4371: add refin mode
>   iio: frequency: adf4371: add ref doubler
> 
>  .../bindings/iio/frequency/adf4371.yaml       |  5 +-
>  drivers/iio/frequency/adf4371.c               | 47 ++++++++++++++++---
>  2 files changed, 44 insertions(+), 8 deletions(-)
>