* [PATCH v4 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node Judith Mendez
` (8 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Hari Nagalla <hnagalla@ti.com>
AM62 SoC devices have a single core R5F processor in wakeup domain.
The R5F processor in wakeup domain is used as a device manager
for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 9b8a1f85aa15c..061819a64300f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -106,6 +106,31 @@ wkup_rti0: watchdog@2b000000 {
status = "reserved";
};
+ wkup_r5fss0: r5fss@78000000 {
+ compatible = "ti,am62-r5fss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78000000 0x00 0x78000000 0x8000>,
+ <0x78100000 0x00 0x78100000 0x8000>;
+ power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ wkup_r5fss0_core0: r5f@78000000 {
+ compatible = "ti,am62-r5f";
+ reg = <0x78000000 0x00008000>,
+ <0x78100000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <121>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 121 1>;
+ firmware-name = "am62-wkup-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
wkup_vtm0: temperature-sensor@b00000 {
compatible = "ti,j7200-vtm";
reg = <0x00 0xb00000 0x00 0x400>,
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
2025-02-06 23:51 ` [PATCH v4 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node Judith Mendez
` (7 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Hari Nagalla <hnagalla@ti.com>
AM62A SoCs have a single R5F core in the MCU voltage domain. The MCU
domain also has a 512KB sram memory, the R5F core can use for
applications needing fast memory access.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 38 ++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index 0469c766b769e..e9042c986e68a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -6,6 +6,18 @@
*/
&cbass_mcu {
+ mcu_ram: sram@79100000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x79100000 0x00 0x80000>;
+ ranges = <0x00 0x00 0x79100000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mcu1-sram@0 {
+ reg = <0x0 0x80000>;
+ };
+ };
+
mcu_pmx0: pinctrl@4084000 {
compatible = "pinctrl-single";
reg = <0x00 0x04084000 0x00 0x88>;
@@ -175,4 +187,30 @@ mcu_mcan1: can@4e18000 {
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
status = "disabled";
};
+
+ mcu_r5fss0: r5fss@79000000 {
+ compatible = "ti,am62-r5fss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x79000000 0x00 0x79000000 0x8000>,
+ <0x79020000 0x00 0x79020000 0x8000>;
+ power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ mcu_r5fss0_core0: r5f@79000000 {
+ compatible = "ti,am62-r5f";
+ reg = <0x79000000 0x00008000>,
+ <0x79020000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <9>;
+ ti,sci-proc-ids = <0x03 0xff>;
+ resets = <&k3_reset 9 1>;
+ firmware-name = "am62a-mcu-r5f0_0-fw";
+ ti,atcm-enable = <0>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <0>;
+ sram = <&mcu_ram>;
+ };
+ };
};
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
2025-02-06 23:51 ` [PATCH v4 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node Judith Mendez
2025-02-06 23:51 ` [PATCH v4 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv " Judith Mendez
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Devarsh Thakkar <devarsht@ti.com>
AM62A SoCs have a single R5F core in wakeup domain. This core is
also used as a device manager for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 25 +++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index b2c8f53517438..785b9f00033a4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -103,6 +103,31 @@ wkup_rti0: watchdog@2b000000 {
status = "reserved";
};
+ wkup_r5fss0: r5fss@78000000 {
+ compatible = "ti,am62-r5fss";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78000000 0x00 0x78000000 0x8000>,
+ <0x78100000 0x00 0x78100000 0x8000>;
+ power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+
+ wkup_r5fss0_core0: r5f@78000000 {
+ compatible = "ti,am62-r5f";
+ reg = <0x78000000 0x00008000>,
+ <0x78100000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <121>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 121 1>;
+ firmware-name = "am62a-wkup-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
wkup_vtm0: temperature-sensor@b00000 {
compatible = "ti,j7200-vtm";
reg = <0x00 0xb00000 0x00 0x400>,
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv device node
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (2 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors Judith Mendez
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Jai Luthra <j-luthra@ti.com>
AM62A SoCs have a C7xv DSP subsystem with Analytics engine capability.
This subsystem is intended for deep learning purposes. Define the
device node for C7xv DSP.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a1daba7b1fad5..f6ebc4eabaf14 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -1123,6 +1123,18 @@ vpu: video-codec@30210000 {
power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
};
+ c7x_0: dsp@7e000000 {
+ compatible = "ti,am62a-c7xv-dsp";
+ reg = <0x00 0x7e000000 0x00 0x00100000>;
+ reg-names = "l2sram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <208>;
+ ti,sci-proc-ids = <0x04 0xff>;
+ resets = <&k3_reset 208 1>;
+ firmware-name = "am62a-c71_0-fw";
+ status = "disabled";
+ };
+
e5010: jpeg-encoder@fd20000 {
compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
reg = <0x00 0xfd20000 0x00 0x100>,
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (3 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv " Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-07 15:56 ` Andrew Davis
2025-02-06 23:51 ` [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: " Judith Mendez
` (4 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Devarsh Thakkar <devarsht@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 90 +++++++++++++++++++++++--
1 file changed, 84 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index a6f0d87a50d8a..eaffbab093cc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -49,6 +49,42 @@ linux,cma {
linux,cma-default;
};
+ c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x1e00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -60,12 +96,6 @@ secure_ddr: optee@9e800000 {
alignment = <0x1000>;
no-map;
};
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
};
opp-table {
@@ -737,3 +767,51 @@ dpi1_out: endpoint {
};
};
};
+
+&mailbox0_cluster0 {
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
2025-02-06 23:51 ` [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors Judith Mendez
@ 2025-02-07 15:56 ` Andrew Davis
2025-02-10 19:16 ` Judith Mendez
0 siblings, 1 reply; 15+ messages in thread
From: Andrew Davis @ 2025-02-07 15:56 UTC (permalink / raw)
To: Judith Mendez, Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Hari Nagalla
On 2/6/25 5:51 PM, Judith Mendez wrote:
> From: Devarsh Thakkar <devarsht@ti.com>
>
> For each remote proc, reserve memory for IPC and bind the mailbox
> assignments. Two memory regions are reserved for each remote processor.
> The first region of 1MB of memory is used for Vring shared buffers
> and the second region is used as external memory to the remote processor
> for the resource table and for tracebuffer allocations.
>
> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> Changes since v3:
> - No change
> ---
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 90 +++++++++++++++++++++++--
> 1 file changed, 84 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index a6f0d87a50d8a..eaffbab093cc1 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -49,6 +49,42 @@ linux,cma {
> linux,cma-default;
> };
>
> + c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x99800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + c7x_0_memory_region: c7x-memory@99900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x99900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c900000 0x00 0x1e00000>;
> + no-map;
> + };
> +
> secure_tfa_ddr: tfa@9e780000 {
> reg = <0x00 0x9e780000 0x00 0x80000>;
> alignment = <0x1000>;
> @@ -60,12 +96,6 @@ secure_ddr: optee@9e800000 {
> alignment = <0x1000>;
> no-map;
> };
> -
> - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
> - compatible = "shared-dma-pool";
> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
> - no-map;
> - };
> };
>
> opp-table {
> @@ -737,3 +767,51 @@ dpi1_out: endpoint {
> };
> };
> };
> +
> +&mailbox0_cluster0 {
Odd, these mailboxes should have been disabled by default as
they are incomplete without this extra board-level info below.
I'll have to fix that later. For now, could you add
status = "okay"; here. That way they are already here and
I don't have to modify this DT file later (which could
cause a conflict if I do it this cycle).
Andrew
> + mbox_r5_0: mbox-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mailbox0_cluster1 {
> + mbox_c7x_0: mbox-c7x-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mailbox0_cluster2 {
> + mbox_mcu_r5_0: mbox-mcu-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&wkup_r5fss0 {
> + status = "okay";
> +};
> +
> +&wkup_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> + <&wkup_r5fss0_core0_memory_region>;
> +};
> +
> +&mcu_r5fss0 {
> + status = "okay";
> +};
> +
> +&mcu_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> + <&mcu_r5fss0_core0_memory_region>;
> +};
> +
> +&c7x_0 {
> + mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
> + memory-region = <&c7x_0_dma_memory_region>,
> + <&c7x_0_memory_region>;
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
2025-02-07 15:56 ` Andrew Davis
@ 2025-02-10 19:16 ` Judith Mendez
0 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-10 19:16 UTC (permalink / raw)
To: Andrew Davis, devicetree
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
linux-kernel, Hari Nagalla, Nishanth Menon, Vignesh Raghavendra
Hi Andrew,
On 2/7/25 9:56 AM, Andrew Davis wrote:
> On 2/6/25 5:51 PM, Judith Mendez wrote:
>> From: Devarsh Thakkar <devarsht@ti.com>
>>
>> For each remote proc, reserve memory for IPC and bind the mailbox
>> assignments. Two memory regions are reserved for each remote processor.
>> The first region of 1MB of memory is used for Vring shared buffers
>> and the second region is used as external memory to the remote processor
>> for the resource table and for tracebuffer allocations.
>>
>> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
>> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
>> Signed-off-by: Judith Mendez <jm@ti.com>
>> ---
>> Changes since v3:
>> - No change
>> ---
>> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 90 +++++++++++++++++++++++--
>> 1 file changed, 84 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> index a6f0d87a50d8a..eaffbab093cc1 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> @@ -49,6 +49,42 @@ linux,cma {
>> linux,cma-default;
>> };
>> + c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x99800000 0x00 0x100000>;
>> + no-map;
>> + };
>> +
>> + c7x_0_memory_region: c7x-memory@99900000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x99900000 0x00 0xf00000>;
>> + no-map;
>> + };
>> +
>> + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9b800000 0x00 0x100000>;
>> + no-map;
>> + };
>> +
>> + mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9b900000 0x00 0xf00000>;
>> + no-map;
>> + };
>> +
>> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9c800000 0x00 0x100000>;
>> + no-map;
>> + };
>> +
>> + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9c900000 0x00 0x1e00000>;
>> + no-map;
>> + };
>> +
>> secure_tfa_ddr: tfa@9e780000 {
>> reg = <0x00 0x9e780000 0x00 0x80000>;
>> alignment = <0x1000>;
>> @@ -60,12 +96,6 @@ secure_ddr: optee@9e800000 {
>> alignment = <0x1000>;
>> no-map;
>> };
>> -
>> - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
>> - no-map;
>> - };
>> };
>> opp-table {
>> @@ -737,3 +767,51 @@ dpi1_out: endpoint {
>> };
>> };
>> };
>> +
>> +&mailbox0_cluster0 {
>
> Odd, these mailboxes should have been disabled by default as
> they are incomplete without this extra board-level info below.
>
> I'll have to fix that later. For now, could you add
> status = "okay"; here. That way they are already here and
> I don't have to modify this DT file later (which could
> cause a conflict if I do it this cycle).
Sure will do.
~ Judith
>
> Andrew
>
>> + mbox_r5_0: mbox-r5-0 {
>> + ti,mbox-rx = <0 0 0>;
>> + ti,mbox-tx = <1 0 0>;
>> + };
>> +};
>> +
>> +&mailbox0_cluster1 {
>> + mbox_c7x_0: mbox-c7x-0 {
>> + ti,mbox-rx = <0 0 0>;
>> + ti,mbox-tx = <1 0 0>;
>> + };
>> +};
>> +
>> +&mailbox0_cluster2 {
>> + mbox_mcu_r5_0: mbox-mcu-r5-0 {
>> + ti,mbox-rx = <0 0 0>;
>> + ti,mbox-tx = <1 0 0>;
>> + };
>> +};
>> +
>> +&wkup_r5fss0 {
>> + status = "okay";
>> +};
>> +
>> +&wkup_r5fss0_core0 {
>> + mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
>> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
>> + <&wkup_r5fss0_core0_memory_region>;
>> +};
>> +
>> +&mcu_r5fss0 {
>> + status = "okay";
>> +};
>> +
>> +&mcu_r5fss0_core0 {
>> + mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
>> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
>> + <&mcu_r5fss0_core0_memory_region>;
>> +};
>> +
>> +&c7x_0 {
>> + mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
>> + memory-region = <&c7x_0_dma_memory_region>,
>> + <&c7x_0_memory_region>;
>> + status = "okay";
>> +};
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (4 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-07 16:58 ` Andrew Davis
2025-02-06 23:51 ` [PATCH v4 7/9] arm64: dts: ti: k3-am62x-sk-common: " Judith Mendez
` (3 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Devarsh Thakkar <devarsht@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- Add SRAM child node for am62p MCU R5 core 0
---
.../dts/ti/k3-am62p-j722s-common-mcu.dtsi | 13 +++++
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 ++++++++++++++++---
2 files changed, 57 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index b33aff0d65c9d..0be3463bc21c5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -6,6 +6,18 @@
*/
&cbass_mcu {
+ mcu_ram: sram@79100000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x79100000 0x00 0x80000>;
+ ranges = <0x00 0x00 0x79100000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mcu_sram1@0 {
+ reg = <0x0 0x80000>;
+ };
+ };
+
mcu_pmx0: pinctrl@4084000 {
compatible = "pinctrl-single";
reg = <0x00 0x04084000 0x00 0x88>;
@@ -213,6 +225,7 @@ mcu_r5fss0_core0: r5f@79000000 {
ti,atcm-enable = <0>;
ti,btcm-enable = <1>;
ti,loczrama = <0>;
+ sram = <&mcu_ram>;
};
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ad71d2f27f538..9609727d042d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -48,6 +48,30 @@ reserved-memory {
#size-cells = <2>;
ranges;
+ mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x1e00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
no-map;
@@ -57,12 +81,6 @@ secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
no-map;
};
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
};
vmain_pd: regulator-0 {
@@ -638,6 +656,26 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 {
};
};
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
2025-02-06 23:51 ` [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: " Judith Mendez
@ 2025-02-07 16:58 ` Andrew Davis
2025-02-10 19:21 ` Judith Mendez
0 siblings, 1 reply; 15+ messages in thread
From: Andrew Davis @ 2025-02-07 16:58 UTC (permalink / raw)
To: Judith Mendez, Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Hari Nagalla
On 2/6/25 5:51 PM, Judith Mendez wrote:
> From: Devarsh Thakkar <devarsht@ti.com>
>
> For each remote proc, reserve memory for IPC and bind the mailbox
> assignments. Two memory regions are reserved for each remote processor.
> The first region of 1MB of memory is used for Vring shared buffers
> and the second region is used as external memory to the remote processor
> for the resource table and for tracebuffer allocations.
>
> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> Changes since v3:
> - Add SRAM child node for am62p MCU R5 core 0
> ---
> .../dts/ti/k3-am62p-j722s-common-mcu.dtsi | 13 +++++
> arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 ++++++++++++++++---
> 2 files changed, 57 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> index b33aff0d65c9d..0be3463bc21c5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> @@ -6,6 +6,18 @@
> */
>
> &cbass_mcu {
> + mcu_ram: sram@79100000 {
> + compatible = "mmio-sram";
> + reg = <0x00 0x79100000 0x00 0x80000>;
> + ranges = <0x00 0x00 0x79100000 0x80000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + mcu_sram1@0 {
What does this node do for us? Seems you reserve the whole SRAM
area from the start, but shouldn't the phandle in mcu_r5fss0_core0
point to this node? Or better it would use the normal SRAM API
to request an allocation from this region.
Since this is still not resolved, and you don't mention it in
the commit message, might be good to drop this SRAM part of this
patch and deal with this in a later series.
Andrew
> + reg = <0x0 0x80000>;
> + };
> + };
> +
> mcu_pmx0: pinctrl@4084000 {
> compatible = "pinctrl-single";
> reg = <0x00 0x04084000 0x00 0x88>;
> @@ -213,6 +225,7 @@ mcu_r5fss0_core0: r5f@79000000 {
> ti,atcm-enable = <0>;
> ti,btcm-enable = <1>;
> ti,loczrama = <0>;
> + sram = <&mcu_ram>;
> };
> };
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> index ad71d2f27f538..9609727d042d3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> @@ -48,6 +48,30 @@ reserved-memory {
> #size-cells = <2>;
> ranges;
>
> + mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c900000 0x00 0x1e00000>;
> + no-map;
> + };
> +
> secure_tfa_ddr: tfa@9e780000 {
> reg = <0x00 0x9e780000 0x00 0x80000>;
> no-map;
> @@ -57,12 +81,6 @@ secure_ddr: optee@9e800000 {
> reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
> no-map;
> };
> -
> - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
> - compatible = "shared-dma-pool";
> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
> - no-map;
> - };
> };
>
> vmain_pd: regulator-0 {
> @@ -638,6 +656,26 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 {
> };
> };
>
> +&wkup_r5fss0 {
> + status = "okay";
> +};
> +
> +&wkup_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> + <&wkup_r5fss0_core0_memory_region>;
> +};
> +
> +&mcu_r5fss0 {
> + status = "okay";
> +};
> +
> +&mcu_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> + <&mcu_r5fss0_core0_memory_region>;
> +};
> +
> &main_uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&main_uart0_pins_default>;
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
2025-02-07 16:58 ` Andrew Davis
@ 2025-02-10 19:21 ` Judith Mendez
0 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-10 19:21 UTC (permalink / raw)
To: Andrew Davis, Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Hari Nagalla
Hi Andrew,
On 2/7/25 10:58 AM, Andrew Davis wrote:
> On 2/6/25 5:51 PM, Judith Mendez wrote:
>> From: Devarsh Thakkar <devarsht@ti.com>
>>
>> For each remote proc, reserve memory for IPC and bind the mailbox
>> assignments. Two memory regions are reserved for each remote processor.
>> The first region of 1MB of memory is used for Vring shared buffers
>> and the second region is used as external memory to the remote processor
>> for the resource table and for tracebuffer allocations.
>>
>> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
>> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
>> Signed-off-by: Judith Mendez <jm@ti.com>
>> ---
>> Changes since v3:
>> - Add SRAM child node for am62p MCU R5 core 0
>> ---
>> .../dts/ti/k3-am62p-j722s-common-mcu.dtsi | 13 +++++
>> arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 ++++++++++++++++---
>> 2 files changed, 57 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
>> b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
>> index b33aff0d65c9d..0be3463bc21c5 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
>> @@ -6,6 +6,18 @@
>> */
>> &cbass_mcu {
>> + mcu_ram: sram@79100000 {
>> + compatible = "mmio-sram";
>> + reg = <0x00 0x79100000 0x00 0x80000>;
>> + ranges = <0x00 0x00 0x79100000 0x80000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + mcu_sram1@0 {
>
> What does this node do for us? Seems you reserve the whole SRAM
> area from the start, but shouldn't the phandle in mcu_r5fss0_core0
> point to this node? Or better it would use the normal SRAM API
> to request an allocation from this region.
>
> Since this is still not resolved, and you don't mention it in
> the commit message, might be good to drop this SRAM part of this
> patch and deal with this in a later series.
Ok, since we do not have a better way to do this for now, will drop the
SRAM node.
Will respin the series one more time. Anyways I forgot to include
another patch so will add that for v5.
Thanks,
Judith
>
> Andrew
>
>> + reg = <0x0 0x80000>;
>> + };
>> + };
>> +
>> mcu_pmx0: pinctrl@4084000 {
>> compatible = "pinctrl-single";
>> reg = <0x00 0x04084000 0x00 0x88>;
>> @@ -213,6 +225,7 @@ mcu_r5fss0_core0: r5f@79000000 {
>> ti,atcm-enable = <0>;
>> ti,btcm-enable = <1>;
>> ti,loczrama = <0>;
>> + sram = <&mcu_ram>;
>> };
>> };
>> };
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
>> b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
>> index ad71d2f27f538..9609727d042d3 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
>> @@ -48,6 +48,30 @@ reserved-memory {
>> #size-cells = <2>;
>> ranges;
>> + mcu_r5fss0_core0_dma_memory_region:
>> mcu-r5fss-dma-memory-region@9b800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9b800000 0x00 0x100000>;
>> + no-map;
>> + };
>> +
>> + mcu_r5fss0_core0_memory_region:
>> mcu-r5fss-memory-region@9b900000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9b900000 0x00 0xf00000>;
>> + no-map;
>> + };
>> +
>> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9c800000 0x00 0x100000>;
>> + no-map;
>> + };
>> +
>> + wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x00 0x9c900000 0x00 0x1e00000>;
>> + no-map;
>> + };
>> +
>> secure_tfa_ddr: tfa@9e780000 {
>> reg = <0x00 0x9e780000 0x00 0x80000>;
>> no-map;
>> @@ -57,12 +81,6 @@ secure_ddr: optee@9e800000 {
>> reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
>> no-map;
>> };
>> -
>> - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
>> - no-map;
>> - };
>> };
>> vmain_pd: regulator-0 {
>> @@ -638,6 +656,26 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 {
>> };
>> };
>> +&wkup_r5fss0 {
>> + status = "okay";
>> +};
>> +
>> +&wkup_r5fss0_core0 {
>> + mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
>> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
>> + <&wkup_r5fss0_core0_memory_region>;
>> +};
>> +
>> +&mcu_r5fss0 {
>> + status = "okay";
>> +};
>> +
>> +&mcu_r5fss0_core0 {
>> + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
>> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
>> + <&mcu_r5fss0_core0_memory_region>;
>> +};
>> +
>> &main_uart0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&main_uart0_pins_default>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v4 7/9] arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (5 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: " Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP Judith Mendez
` (2 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Hari Nagalla <hnagalla@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 32 ++++++++++++++++---
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 2f129e8cd5b9f..9ea4de9303f51 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -68,6 +68,18 @@ mcu_m4fss_memory_region: m4f-memory@9cc00000 {
no-map;
};
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9da00000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9db00000 0x00 0xc00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -80,11 +92,6 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9db00000 0x00 0xc00000>;
- no-map;
- };
};
leds {
@@ -478,6 +485,11 @@ mbox_m4_0: mbox-m4-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
};
&mcu_m4fss {
@@ -487,6 +499,16 @@ &mcu_m4fss {
status = "okay";
};
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
&usbss0 {
bootph-all;
status = "okay";
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (6 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 7/9] arm64: dts: ti: k3-am62x-sk-common: " Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 " Judith Mendez
2025-02-07 15:21 ` [PATCH v4 0/9] Add R5F and C7xv device nodes Rob Herring (Arm)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Hari Nagalla <hnagalla@ti.com>
C7x DSP uses main_timer2, so mark it as reserved in linux DT.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index eaffbab093cc1..f03b06b7de51d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -679,6 +679,11 @@ &main_uart1 {
status = "reserved";
};
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+ status = "reserved";
+};
+
&usbss0 {
status = "okay";
ti,vbus-divider;
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (7 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP Judith Mendez
@ 2025-02-06 23:51 ` Judith Mendez
2025-02-07 15:21 ` [PATCH v4 0/9] Add R5F and C7xv device nodes Rob Herring (Arm)
9 siblings, 0 replies; 15+ messages in thread
From: Judith Mendez @ 2025-02-06 23:51 UTC (permalink / raw)
To: Nishanth Menon, Vignesh Raghavendra
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel,
devicetree, linux-kernel, Andrew Davis, Hari Nagalla,
Judith Mendez
From: Hari Nagalla <hnagalla@ti.com>
The main rti4 watchdog timer is used by the C7x DSP, so reserve the
timer in the linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f03b06b7de51d..ffa437873f6d1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -820,3 +820,8 @@ &c7x_0 {
<&c7x_0_memory_region>;
status = "okay";
};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+ status = "reserved";
+};
--
2.48.0
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v4 0/9] Add R5F and C7xv device nodes
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
` (8 preceding siblings ...)
2025-02-06 23:51 ` [PATCH v4 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 " Judith Mendez
@ 2025-02-07 15:21 ` Rob Herring (Arm)
9 siblings, 0 replies; 15+ messages in thread
From: Rob Herring (Arm) @ 2025-02-07 15:21 UTC (permalink / raw)
To: Judith Mendez
Cc: Conor Dooley, Nishanth Menon, Krzysztof Kozlowski,
Vignesh Raghavendra, Hari Nagalla, Andrew Davis, linux-kernel,
linux-arm-kernel, devicetree
On Thu, 06 Feb 2025 17:51:50 -0600, Judith Mendez wrote:
> For am62x and am62ax devices, this patch series adds device nodes
> for the R5F subsystem and C7xv DSP subsystem found in their
> respective voltage domain, based on the device TRMs [0][1].
>
> This patch series also includes patches for enabling IPC for am62x,
> am62ax, and am62px by reserving memory and binding the mailbox
> assignments for each remote core.
>
> Also reserve main_rti4 and main_timer2 for the C7x DSP as per
> firmware requirements.
>
> Changes since v3:
> - Add SRAM child node for am62p MCU R5 core 0
>
> Links
> v3: https://lore.kernel.org/linux-devicetree/20250204011641.1523561-1-jm@ti.com/
> v2: https://lore.kernel.org/linux-devicetree/20250131214611.3288742-1-jm@ti.com/
> v1: https://lore.kernel.org/linux-devicetree/20250127221631.3974583-1-jm@ti.com/
>
> [0] https://www.ti.com/lit/pdf/spruj16
> [1] https://www.ti.com/lit/pdf/spruiv7
>
> Devarsh Thakkar (3):
> arm64: dts: ti: k3-am62a-wakeup: Add R5F device node
> arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
> arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
>
> Hari Nagalla (5):
> arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node
> arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node
> arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
> arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
> arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
>
> Jai Luthra (1):
> arm64: dts: ti: k3-am62a-main: Add C7xv device node
>
> arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 25 +++++
> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 12 +++
> arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 38 +++++++
> arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 25 +++++
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 100 ++++++++++++++++--
> .../dts/ti/k3-am62p-j722s-common-mcu.dtsi | 13 +++
> arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 +++++++--
> .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 32 +++++-
> 8 files changed, 278 insertions(+), 17 deletions(-)
>
>
> base-commit: 5532b8a9ce0e80514e37a1e082824934663580a3
> --
> 2.48.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/ti/' for 20250206235200.3128163-1-jm@ti.com:
arch/arm64/boot/dts/ti/k3-am62p5-sk.dtb: sram@79100000: 'mcu_sram1@0' does not match any of the regexes: '^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm64/boot/dts/ti/k3-j722s-evm.dtb: sram@79100000: 'mcu_sram1@0' does not match any of the regexes: '^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dtb: sram@79100000: 'mcu_sram1@0' does not match any of the regexes: '^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
^ permalink raw reply [flat|nested] 15+ messages in thread