From: Judith Mendez <jm@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>, Hari Nagalla <hnagalla@ti.com>,
Judith Mendez <jm@ti.com>
Subject: [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
Date: Thu, 6 Feb 2025 17:51:56 -0600 [thread overview]
Message-ID: <20250206235200.3128163-7-jm@ti.com> (raw)
In-Reply-To: <20250206235200.3128163-1-jm@ti.com>
From: Devarsh Thakkar <devarsht@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v3:
- Add SRAM child node for am62p MCU R5 core 0
---
.../dts/ti/k3-am62p-j722s-common-mcu.dtsi | 13 +++++
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 ++++++++++++++++---
2 files changed, 57 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index b33aff0d65c9d..0be3463bc21c5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -6,6 +6,18 @@
*/
&cbass_mcu {
+ mcu_ram: sram@79100000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x79100000 0x00 0x80000>;
+ ranges = <0x00 0x00 0x79100000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mcu_sram1@0 {
+ reg = <0x0 0x80000>;
+ };
+ };
+
mcu_pmx0: pinctrl@4084000 {
compatible = "pinctrl-single";
reg = <0x00 0x04084000 0x00 0x88>;
@@ -213,6 +225,7 @@ mcu_r5fss0_core0: r5f@79000000 {
ti,atcm-enable = <0>;
ti,btcm-enable = <1>;
ti,loczrama = <0>;
+ sram = <&mcu_ram>;
};
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ad71d2f27f538..9609727d042d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -48,6 +48,30 @@ reserved-memory {
#size-cells = <2>;
ranges;
+ mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x1e00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
no-map;
@@ -57,12 +81,6 @@ secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
no-map;
};
-
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9c900000 0x00 0x01e00000>;
- no-map;
- };
};
vmain_pd: regulator-0 {
@@ -638,6 +656,26 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 {
};
};
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
--
2.48.0
next prev parent reply other threads:[~2025-02-06 23:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-06 23:51 [PATCH v4 0/9] Add R5F and C7xv device nodes Judith Mendez
2025-02-06 23:51 ` [PATCH v4 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node Judith Mendez
2025-02-06 23:51 ` [PATCH v4 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node Judith Mendez
2025-02-06 23:51 ` [PATCH v4 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node Judith Mendez
2025-02-06 23:51 ` [PATCH v4 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv " Judith Mendez
2025-02-06 23:51 ` [PATCH v4 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors Judith Mendez
2025-02-07 15:56 ` Andrew Davis
2025-02-10 19:16 ` Judith Mendez
2025-02-06 23:51 ` Judith Mendez [this message]
2025-02-07 16:58 ` [PATCH v4 6/9] arm64: dts: ti: k3-am62p5-sk: " Andrew Davis
2025-02-10 19:21 ` Judith Mendez
2025-02-06 23:51 ` [PATCH v4 7/9] arm64: dts: ti: k3-am62x-sk-common: " Judith Mendez
2025-02-06 23:51 ` [PATCH v4 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP Judith Mendez
2025-02-06 23:51 ` [PATCH v4 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 " Judith Mendez
2025-02-07 15:21 ` [PATCH v4 0/9] Add R5F and C7xv device nodes Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250206235200.3128163-7-jm@ti.com \
--to=jm@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).