[PATCH v2 15/16] nvmem: microchip-otpc: Enable necessary clocks

[Alexander Dahl <ada@thorsis.com>]

Without enabling the main rc clock, initializing the packet list leads
to a read timeout on the first packet, at least on sam9x60.

According to SAM9X60 datasheet (DS60001579G) section "23.4 Product
Dependencies" the clock must be enabled for reading and writing.

Tested on sam9x60-curiosity board.

Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@microchip.com/T/#u
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---

Notes:
    v2:
    - Rewrite to enable _all_ clocks defined in dts

 drivers/nvmem/microchip-otpc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
index d39f2d57e5f5e..2c524c163b7e2 100644
--- a/drivers/nvmem/microchip-otpc.c
+++ b/drivers/nvmem/microchip-otpc.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/nvmem-provider.h>
@@ -241,6 +242,7 @@ static struct nvmem_config mchp_nvmem_config = {
 static int mchp_otpc_probe(struct platform_device *pdev)
 {
 	struct nvmem_device *nvmem;
+	struct clk_bulk_data *clks;
 	struct mchp_otpc *otpc;
 	u32 size;
 	int ret;
@@ -253,6 +255,11 @@ static int mchp_otpc_probe(struct platform_device *pdev)
 	if (IS_ERR(otpc->base))
 		return PTR_ERR(otpc->base);
 
+	ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Error getting clocks!\n");
+
 	otpc->dev = &pdev->dev;
 	ret = mchp_otpc_init_packets_list(otpc, &size);
 	if (ret)
-- 
2.39.5