From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
To: lpieralisi@kernel.org, kw@linux.com,
manivannan.sadhasivam@linaro.org, robh@kernel.org,
bhelgaas@google.com, krzk+dt@kernel.org, conor+dt@kernel.org,
dinguyen@kernel.org, joyce.ooi@intel.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: matthew.gerlach@altera.com, peter.colberg@altera.com,
Matthew Gerlach <matthew.gerlach@linux.intel.com>
Subject: [PATCH v6 3/7] arm64: dts: agilex: move bus@80000000 to socfpga_agilex.dtsi
Date: Tue, 11 Feb 2025 09:17:21 -0600 [thread overview]
Message-ID: <20250211151725.4133582-4-matthew.gerlach@linux.intel.com> (raw)
In-Reply-To: <20250211151725.4133582-1-matthew.gerlach@linux.intel.com>
The bus from HPS to the FPGA is part of the SoC. Move its
device tree node to socfpga_agilex.dtsi to allow it to be
referenced by any board.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
---
v6:
- New patch to series.
---
arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 10 +++++++
.../boot/dts/intel/socfpga_agilex_n6000.dts | 28 +++++++------------
2 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 42cb24cfa6da..26ccdf042281 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -678,5 +678,15 @@ qspi: spi@ff8d2000 {
status = "disabled";
};
+
+ bus80000000: bus@80000000 {
+ compatible = "simple-bus";
+ reg = <0x80000000 0x60000000>,
+ <0xf9000000 0x00100000>;
+ reg-names = "axi_h2f", "axi_h2f_lw";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index d22de06e9839..350c040ce9fe 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -25,24 +25,6 @@ memory@80000000 {
/* We expect the bootloader to fill in the reg */
reg = <0 0x80000000 0 0>;
};
-
- soc@0 {
- bus@80000000 {
- compatible = "simple-bus";
- reg = <0x80000000 0x60000000>,
- <0xf9000000 0x00100000>;
- reg-names = "axi_h2f", "axi_h2f_lw";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
-
- dma-controller@0 {
- compatible = "intel,hps-copy-engine";
- reg = <0x00000000 0x00000000 0x00001000>;
- #dma-cells = <1>;
- };
- };
- };
};
&osc1 {
@@ -64,3 +46,13 @@ &watchdog0 {
&fpga_mgr {
status = "disabled";
};
+
+&bus80000000 {
+ ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+ dma-controller@0 {
+ compatible = "intel,hps-copy-engine";
+ reg = <0x00000000 0x00000000 0x00001000>;
+ #dma-cells = <1>;
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2025-02-11 15:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 15:17 [PATCH v6 0/7] Add PCIe Root Port support for Agilex family of chips Matthew Gerlach
2025-02-11 15:17 ` [PATCH v6 1/7] dt-bindings: PCI: altera: Add binding for Agilex Matthew Gerlach
2025-02-11 15:17 ` [PATCH v6 2/7] arm64: dts: agilex: Fix fixed-clock schema warnings Matthew Gerlach
2025-02-12 5:56 ` Krzysztof Kozlowski
2025-02-13 17:37 ` matthew.gerlach
2025-02-13 18:03 ` Krzysztof Kozlowski
2025-02-11 15:17 ` Matthew Gerlach [this message]
2025-02-12 5:57 ` [PATCH v6 3/7] arm64: dts: agilex: move bus@80000000 to socfpga_agilex.dtsi Krzysztof Kozlowski
2025-02-11 15:17 ` [PATCH v6 4/7] arm64: dts: agilex: refactor shared dts into dtsi Matthew Gerlach
2025-02-12 5:59 ` Krzysztof Kozlowski
2025-02-11 15:17 ` [PATCH v6 5/7] arm64: dts: agilex: add dtsi for PCIe Root Port Matthew Gerlach
2025-02-11 15:17 ` [PATCH v6 6/7] arm64: dts: agilex: add dts enabling " Matthew Gerlach
2025-02-12 6:00 ` Krzysztof Kozlowski
2025-02-11 15:17 ` [PATCH v6 7/7] PCI: altera: Add Agilex support Matthew Gerlach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250211151725.4133582-4-matthew.gerlach@linux.intel.com \
--to=matthew.gerlach@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=joyce.ooi@intel.com \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=matthew.gerlach@altera.com \
--cc=peter.colberg@altera.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).