From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: linux-riscv@lists.infradead.org, linux-rtc@vger.kernel.org,
Jingbao Qiu <qiujingbao.dlmu@gmail.com>,
Inochi Amaoto <inochiama@gmail.com>,
robh@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, unicorn_wang@outlook.com,
inochiama@outlook.com, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu, dlan@gentoo.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v10 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC
Date: Thu, 13 Feb 2025 21:58:18 +0100 [thread overview]
Message-ID: <20250213205818f14edd30@mail.local> (raw)
In-Reply-To: <20250213184622.2099324-3-alexander.sverdlin@gmail.com>
On 13/02/2025 19:46:15+0100, Alexander Sverdlin wrote:
> +static int cv1800_rtc_probe(struct platform_device *pdev)
> +{
> + struct cv1800_rtc_priv *rtc;
> + u32 ctrl_val;
> + void __iomem *base;
> + int ret;
> +
> + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> + if (!rtc)
> + return -ENOMEM;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + rtc->rtc_map = devm_regmap_init_mmio(&pdev->dev, base,
> + &cv1800_rtc_regmap_config);
> + if (IS_ERR(rtc->rtc_map))
> + return PTR_ERR(rtc->rtc_map);
> +
> + rtc->irq = platform_get_irq(pdev, 0);
> + if (rtc->irq < 0)
> + return rtc->irq;
> +
> + rtc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> + if (IS_ERR(rtc->clk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(rtc->clk),
> + "clk not found\n");
> +
> + platform_set_drvdata(pdev, rtc);
> +
> + device_init_wakeup(&pdev->dev, 1);
> +
> + rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
> + if (IS_ERR(rtc->rtc_dev))
> + return PTR_ERR(rtc->rtc_dev);
> +
> + rtc->rtc_dev->ops = &cv1800_rtc_ops;
> + rtc->rtc_dev->range_max = U32_MAX;
> +
> + ret = devm_request_irq(&pdev->dev, rtc->irq, cv1800_rtc_irq_handler,
> + IRQF_TRIGGER_HIGH, "rtc alarm", rtc);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "cannot register interrupt handler\n");
> +
> + rtc_enable_sec_counter(rtc);
Really, this must be avoided, this loses precious information and
changing it later will break users. What must be done is to check
whether the RTC is started in .read_time if this is not the case, return
-EINVAL instead of an invalid date/time.
The RTC must be started once the time is set for the first time. This
ensures we can detect when the time is invalid.
> +
> + return devm_rtc_register_device(rtc->rtc_dev);
> +}
> +
> +static const struct of_device_id cv1800_dt_ids[] = {
> + { .compatible = "sophgo,cv1800-rtc" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, cv1800_dt_ids);
> +
> +static struct platform_driver cv1800_rtc_driver = {
> + .driver = {
> + .name = "sophgo-cv1800-rtc",
> + .of_match_table = cv1800_dt_ids,
> + },
> + .probe = cv1800_rtc_probe,
> +};
> +
> +module_platform_driver(cv1800_rtc_driver);
> +MODULE_AUTHOR("Jingbao Qiu");
> +MODULE_DESCRIPTION("Sophgo cv1800 RTC Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.48.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
prev parent reply other threads:[~2025-02-13 20:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 18:46 [PATCH v10 0/2] riscv: rtc: sophgo: add rtc support for CV1800 Alexander Sverdlin
2025-02-13 18:46 ` [PATCH v10 1/2] dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC Alexander Sverdlin
2025-02-13 18:46 ` [PATCH v10 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC Alexander Sverdlin
2025-02-13 20:58 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250213205818f14edd30@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=alexander.sverdlin@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=inochiama@gmail.com \
--cc=inochiama@outlook.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=qiujingbao.dlmu@gmail.com \
--cc=robh@kernel.org \
--cc=unicorn_wang@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox