[PATCH 0/2] riscv: dts: spacemit: Add initial support for Milk-V Jupiter

[Javier Martinez Canillas <javierm@redhat.com>]

Hello,

This patch-set adds a minimal support for the Milk-V Jupiter board.
which is a Mini ITX computer based on the SpacemiT K1/M1 RISC-V SoC.

The DTS is very basic but at least allows to boot into a serial console
and get UART output, similar to what exists for other K1 based boards
such as the BananaPi BPI-F3.

Patch #1 just adds the compatible string for the Milk-V Jupiter to the
SpacemiT bindings and patch #2 adds the minimal DTS for this computer.

Best regards,
Javier


Javier Martinez Canillas (2):
  dt-bindings: riscv: spacemit: Add Milk-V Jupiter board compatible
  riscv: dts: spacemit: Add Milk-V Jupiter board device tree

 .../devicetree/bindings/riscv/spacemit.yaml   |  1 +
 arch/riscv/boot/dts/spacemit/Makefile         |  1 +
 .../boot/dts/spacemit/k1-milkv-jupiter.dts    | 27 +++++++++++++++++++
 3 files changed, 29 insertions(+)
 create mode 100644 arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts

-- 
2.48.1