From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
To: lpieralisi@kernel.org, kw@linux.com,
manivannan.sadhasivam@linaro.org, robh@kernel.org,
bhelgaas@google.com, krzk+dt@kernel.org, conor+dt@kernel.org,
dinguyen@kernel.org, joyce.ooi@intel.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: matthew.gerlach@altera.com, peter.colberg@altera.com,
Matthew Gerlach <matthew.gerlach@linux.intel.com>
Subject: [PATCH v7 5/7] arm64: dts: agilex: add dtsi for PCIe Root Port
Date: Sat, 15 Feb 2025 09:53:57 -0600 [thread overview]
Message-ID: <20250215155359.321513-6-matthew.gerlach@linux.intel.com> (raw)
In-Reply-To: <20250215155359.321513-1-matthew.gerlach@linux.intel.com>
Add the base device tree for support of the PCIe Root Port
for the Agilex family of chips.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
---
v7:
- Change value of #interrupt-cells to decimal.
v6:
- Reference bus80000000 in socfpga_agilex.dtsi
- Change values of #address-cells, #size-cell, and num-vectors to decimal
- Fix SPDX header.
- Fix checkpatch.pl line length warning.
- Fix "address format error" from dtschema check.
v3:
- Remove accepted patches from patch set.
v2:
- Rename node to fix schema check error.
---
.../intel/socfpga_agilex_pcie_root_port.dtsi | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi
new file mode 100644
index 000000000000..5333bd3fe535
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024, Intel Corporation
+ */
+&bus80000000 {
+ ranges = <0x00000000 0x00000000 0x80000000 0x00040000>,
+ <0x00000000 0x10000000 0x90100000 0x0ff00000>,
+ <0x00000000 0x20000000 0xa0000000 0x00200000>,
+ <0x00000001 0x00010000 0xf9010000 0x00008000>,
+ <0x00000001 0x00018000 0xf9018000 0x00000080>,
+ <0x00000001 0x00018080 0xf9018080 0x00000010>;
+
+ pcie_0_pcie_aglx: pcie@10000000 {
+ reg = <0x00000000 0x10000000 0x10000000>,
+ <0x00000001 0x00010000 0x00008000>,
+ <0x00000000 0x20000000 0x00200000>;
+ reg-names = "Txs", "Cra", "Hip";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 0x14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ bus-range = <0x0000000 0x000000ff>;
+ ranges = <0x82000000 0x00000000 0x00100000 0x00000000
+ 0x10000000 0x00000000 0x0ff00000>;
+ msi-parent = <&pcie_0_msi_irq>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_0_pcie_aglx 0 0 0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_0_pcie_aglx 0 0 0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_0_pcie_aglx 0 0 0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_0_pcie_aglx 0 0 0 0x4>;
+ status = "disabled";
+ };
+
+ pcie_0_msi_irq: msi@100018080 {
+ compatible = "altr,msi-1.0";
+ reg = <0x00000001 0x00018080 0x00000010>,
+ <0x00000001 0x00018000 0x00000080>;
+ reg-names = "csr", "vector_slave";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 0x13 IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ num-vectors = <32>;
+ status = "disabled";
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2025-02-15 15:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-15 15:53 [PATCH v7 0/7] Add PCIe Root Port support for Agilex family of chips Matthew Gerlach
2025-02-15 15:53 ` [PATCH v7 1/7] dt-bindings: PCI: altera: Add binding for Agilex Matthew Gerlach
2025-02-15 15:53 ` [PATCH v7 2/7] dt-bindings: intel: document Agilex PCIe Root Port Matthew Gerlach
2025-02-16 11:56 ` Krzysztof Kozlowski
2025-02-17 15:47 ` matthew.gerlach
2025-02-18 7:25 ` Krzysztof Kozlowski
2025-02-18 22:51 ` matthew.gerlach
2025-02-15 15:53 ` [PATCH v7 3/7] arm64: dts: agilex: Fix fixed-clock schema warnings Matthew Gerlach
2025-02-16 11:58 ` Krzysztof Kozlowski
2025-02-18 21:44 ` matthew.gerlach
2025-02-19 23:53 ` matthew.gerlach
2025-02-15 15:53 ` [PATCH v7 4/7] arm64: dts: agilex: move bus@80000000 to socfpga_agilex.dtsi Matthew Gerlach
2025-02-15 15:53 ` Matthew Gerlach [this message]
2025-02-15 15:53 ` [PATCH v7 6/7] arm64: dts: agilex: add dts enabling PCIe Root Port Matthew Gerlach
2025-02-16 12:00 ` Krzysztof Kozlowski
2025-02-18 22:40 ` matthew.gerlach
2025-02-15 15:53 ` [PATCH v7 7/7] PCI: altera: Add Agilex support Matthew Gerlach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250215155359.321513-6-matthew.gerlach@linux.intel.com \
--to=matthew.gerlach@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=joyce.ooi@intel.com \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=matthew.gerlach@altera.com \
--cc=peter.colberg@altera.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).