From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs
Date: Tue, 18 Feb 2025 18:35:47 +1000 [thread overview]
Message-ID: <20250218-apple-codec-changes-v2-13-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>
From: Martin Povišer <povik+lin@cutebit.org>
Export a file for the readout of die temperature measurements.
As per the datasheet, the temperature can be calculated by
dividing the register value by 16 and then subtracting 93.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2770.c | 57 +++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 7f219df8be7046912bf3ef452f75c17b5118bcf6..84066884d36be8d41d83bca5680e9f683c420d78 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -20,6 +20,7 @@
#include <linux/regmap.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/sysfs.h>
#include <sound/soc.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -491,6 +492,51 @@ static struct snd_soc_dai_driver tas2770_dai_driver[] = {
},
};
+static int tas2770_read_die_temp(struct tas2770_priv *tas2770, int *result)
+{
+ int ret, reading;
+
+ ret = snd_soc_component_read(tas2770->component, TAS2770_TEMP_MSB);
+ if (ret < 0)
+ return ret;
+ reading = ret << 4;
+
+ ret = snd_soc_component_read(tas2770->component, TAS2770_TEMP_LSB);
+ if (ret < 0)
+ return ret;
+ reading |= ret >> 4;
+
+ /*
+ * As per datasheet: divide register by 16 and subtract 93. We don't
+ * want to divide just yet though.
+ */
+ *result = reading - (93 * 16);
+ return 0;
+}
+
+static ssize_t die_temp_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tas2770_priv *tas2770 = i2c_get_clientdata(to_i2c_client(dev));
+ int ret, temp;
+
+ ret = tas2770_read_die_temp(tas2770, &temp);
+
+ if (ret < 0)
+ return ret;
+
+ return sysfs_emit(buf, "%d.%03d C\n", temp / 16,
+ (temp * 1000 / 16) % 1000);
+}
+
+static DEVICE_ATTR_RO(die_temp);
+
+static struct attribute *tas2770_sysfs_attrs[] = {
+ &dev_attr_die_temp.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(tas2770_sysfs);
+
static const struct regmap_config tas2770_i2c_regmap;
static int tas2770_codec_probe(struct snd_soc_component *component)
@@ -517,9 +563,19 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
return ret;
}
+ ret = sysfs_create_groups(&component->dev->kobj, tas2770_sysfs_groups);
+
+ if (ret < 0)
+ return ret;
+
return 0;
}
+static void tas2770_codec_remove(struct snd_soc_component *component)
+{
+ sysfs_remove_groups(&component->dev->kobj, tas2770_sysfs_groups);
+}
+
static DECLARE_TLV_DB_SCALE(tas2770_digital_tlv, 1100, 50, 0);
static DECLARE_TLV_DB_SCALE(tas2770_playback_volume, -10050, 50, 0);
@@ -532,6 +588,7 @@ static const struct snd_kcontrol_new tas2770_snd_controls[] = {
static const struct snd_soc_component_driver soc_component_driver_tas2770 = {
.probe = tas2770_codec_probe,
+ .remove = tas2770_codec_remove,
.suspend = tas2770_codec_suspend,
.resume = tas2770_codec_resume,
.controls = tas2770_snd_controls,
--
2.48.1
next prev parent reply other threads:[~2025-02-18 8:37 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-18 8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18 8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18 8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18 8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18 8:35 ` [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-18 8:35 ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-18 15:18 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18 8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21 ` Mark Brown
2025-02-18 8:35 ` James Calligeros [this message]
2025-02-18 15:22 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs Mark Brown
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20 ` Guenter Roeck
2025-02-21 11:31 ` James Calligeros
2025-02-21 15:03 ` Guenter Roeck
2025-02-22 0:16 ` James Calligeros
2025-02-18 15:24 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18 8:35 ` [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon James Calligeros
2025-02-18 8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25 ` Mark Brown
2025-02-18 15:55 ` Martin Povišer
2025-02-18 8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-18 8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33 ` Mark Brown
2025-02-19 4:47 ` James Calligeros
2025-02-20 1:45 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18 8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18 8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18 8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18 8:36 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-18 15:38 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250218-apple-codec-changes-v2-13-932760fd7e07@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jdelvare@suse.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marcan@marcan.st \
--cc=neal@gompa.dev \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).