From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
linux-hwmon@vger.kernel.org,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon
Date: Tue, 18 Feb 2025 18:35:50 +1000 [thread overview]
Message-ID: <20250218-apple-codec-changes-v2-16-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>
Expose the codec die temperature to the hwmon interface
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2764.c | 70 +++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index b0d016f85f7fd57bec36b33db5e8c2bd242b5b94..670c59e57997a7988af837bd58da695ad773ae14 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -8,6 +8,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/hwmon.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/gpio/consumer.h>
@@ -605,6 +606,61 @@ static struct attribute *tas2764_sysfs_attrs[] = {
};
ATTRIBUTE_GROUPS(tas2764_sysfs);
+#if defined(CONFIG_HWMON)
+static umode_t tas2764_hwmon_is_visible(const void *data,
+ enum hwmon_sensor_types type, u32 attr,
+ int channel)
+{
+ if (type != hwmon_temp)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int tas2764_hwmon_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct tas2764_priv *tas2764 = i2c_get_clientdata(to_i2c_client(dev));
+ int ret;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ ret = tas2764_read_die_temp(tas2764, (int *)val);
+ if (!ret)
+ *val *= 1000;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct hwmon_channel_info *const tas2764_hwmon_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops tas2764_hwmon_ops = {
+ .is_visible = tas2764_hwmon_is_visible,
+ .read = tas2764_hwmon_read,
+};
+
+static const struct hwmon_chip_info tas2764_hwmon_chip_info = {
+ .ops = &tas2764_hwmon_ops,
+ .info = tas2764_hwmon_info,
+};
+#endif
+
static int tas2764_codec_probe(struct snd_soc_component *component)
{
struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
@@ -882,6 +938,20 @@ static int tas2764_i2c_probe(struct i2c_client *client)
}
}
+ if (IS_REACHABLE(CONFIG_HWMON)) {
+ struct device *hwmon;
+
+ hwmon = devm_hwmon_device_register_with_info(&client->dev, "tas2764",
+ tas2764,
+ &tas2764_hwmon_chip_info,
+ NULL);
+ if (IS_ERR(hwmon)) {
+ return dev_err_probe(&client->dev, PTR_ERR(hwmon),
+ "Failed to register temp sensor\n");
+ }
+ }
+
+
return devm_snd_soc_register_component(tas2764->dev,
&soc_component_driver_tas2764,
tas2764_dai_driver,
--
2.48.1
next prev parent reply other threads:[~2025-02-18 8:37 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-18 8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18 8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18 8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18 8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18 8:35 ` [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic James Calligeros
2025-02-18 8:35 ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-18 15:18 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18 8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-18 15:22 ` Mark Brown
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20 ` Guenter Roeck
2025-02-21 11:31 ` James Calligeros
2025-02-21 15:03 ` Guenter Roeck
2025-02-22 0:16 ` James Calligeros
2025-02-18 15:24 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18 8:35 ` James Calligeros [this message]
2025-02-18 8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25 ` Mark Brown
2025-02-18 15:55 ` Martin Povišer
2025-02-18 8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-18 8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33 ` Mark Brown
2025-02-19 4:47 ` James Calligeros
2025-02-20 1:45 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18 8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18 8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18 8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18 8:36 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-18 15:38 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250218-apple-codec-changes-v2-16-932760fd7e07@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jdelvare@suse.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marcan@marcan.st \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).