From: James Calligeros <jcalligeros99@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
Baojun Xu <baojun.xu@ti.com>, Dan Murphy <dmurphy@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shi Fu <shifu0704@thundersoft.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: "Alyssa Rosenzweig" <alyssa@rosenzweig.io>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Hector Martin" <marcan@marcan.st>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, asahi@lists.linux.dev,
linux-hwmon@vger.kernel.org, "Neal Gompa" <neal@gompa.dev>,
"James Calligeros" <jcalligeros99@gmail.com>
Subject: [PATCH v2 08/29] ASoC: tas2770: Fix and redo I/V sense TDM slot setting logic
Date: Tue, 18 Feb 2025 18:35:42 +1000 [thread overview]
Message-ID: <20250218-apple-codec-changes-v2-8-932760fd7e07@gmail.com> (raw)
In-Reply-To: <20250218-apple-codec-changes-v2-0-932760fd7e07@gmail.com>
From: Martin Povišer <povik+lin@cutebit.org>
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:
* It overrides the V slot parsed from DT binding.
* The V slot is set shifted behind the I slot by the length of the PCM
bitwidth, but the PCM bitwidth has no assured relation to the TDM
slot width.
Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.
There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
---
sound/soc/codecs/tas2770.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 4a86fcec0c1ecab45b9ebcdfc90c78f3290c6fa6..7f219df8be7046912bf3ef452f75c17b5118bcf6 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -224,19 +224,16 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
TAS2770_TDM_CFG_REG2_RXW_MASK,
TAS2770_TDM_CFG_REG2_RXW_16BITS);
- tas2770->v_sense_slot = tas2770->i_sense_slot + 2;
break;
case SNDRV_PCM_FORMAT_S24_LE:
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
TAS2770_TDM_CFG_REG2_RXW_MASK,
TAS2770_TDM_CFG_REG2_RXW_24BITS);
- tas2770->v_sense_slot = tas2770->i_sense_slot + 4;
break;
case SNDRV_PCM_FORMAT_S32_LE:
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG2,
TAS2770_TDM_CFG_REG2_RXW_MASK,
TAS2770_TDM_CFG_REG2_RXW_32BITS);
- tas2770->v_sense_slot = tas2770->i_sense_slot + 4;
break;
default:
@@ -246,11 +243,6 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
if (ret < 0)
return ret;
- ret = tas2770_set_ivsense_transmit(tas2770, tas2770->i_sense_slot,
- tas2770->v_sense_slot);
- if (ret < 0)
- return ret;
-
return 0;
}
@@ -505,6 +497,7 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
{
struct tas2770_priv *tas2770 =
snd_soc_component_get_drvdata(component);
+ int ret;
tas2770->component = component;
@@ -516,6 +509,14 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
tas2770_reset(tas2770);
regmap_reinit_cache(tas2770->regmap, &tas2770_i2c_regmap);
+ if (tas2770->i_sense_slot != -1 && tas2770->v_sense_slot != -1) {
+ ret = tas2770_set_ivsense_transmit(tas2770, tas2770->i_sense_slot,
+ tas2770->v_sense_slot);
+
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
@@ -643,7 +644,7 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
"ti,imon-slot-no");
- tas2770->i_sense_slot = 0;
+ tas2770->i_sense_slot = -1;
}
rc = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no",
@@ -652,7 +653,7 @@ static int tas2770_parse_dt(struct device *dev, struct tas2770_priv *tas2770)
dev_info(tas2770->dev, "Property %s is missing setting default slot\n",
"ti,vmon-slot-no");
- tas2770->v_sense_slot = 2;
+ tas2770->v_sense_slot = -1;
}
tas2770->sdz_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
--
2.48.1
next prev parent reply other threads:[~2025-02-18 8:36 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-18 8:35 [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants James Calligeros
2025-02-18 8:35 ` [PATCH v2 01/29] ASoC: tas2764: Fix power control mask James Calligeros
2025-02-18 8:35 ` [PATCH v2 02/29] ASoC: tas2770: Fix volume scale James Calligeros
2025-02-18 15:13 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 03/29] ASoC: dt-bindings: tas27xx: add compatible for SN012776 James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 04/29] ASoC: dt-bindings: tas2770: add compatible for TAS5770L James Calligeros
2025-02-21 20:24 ` Rob Herring (Arm)
2025-02-18 8:35 ` [PATCH v2 05/29] ASoC: tas2764: Extend driver to SN012776 James Calligeros
2025-02-18 15:15 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 06/29] ASoC: tas2764: Add control concerning overcurrent events James Calligeros
2025-02-18 8:35 ` [PATCH v2 07/29] ASoC: tas2770: Factor out set_ivsense_slots James Calligeros
2025-02-18 8:35 ` James Calligeros [this message]
2025-02-18 8:35 ` [PATCH v2 09/29] ASoC: tas2764: Reinit cache on part reset James Calligeros
2025-02-18 15:18 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 10/29] ASoC: tas2764: Configure zeroing of SDOUT slots James Calligeros
2025-02-18 15:20 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 11/29] ASoC: tas2764: Apply Apple quirks James Calligeros
2025-02-18 8:35 ` [PATCH v2 12/29] ASoC: tas2764: Raise regmap range maximum James Calligeros
2025-02-18 15:21 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 13/29] ASoC: tas2770: Export 'die_temp' to sysfs James Calligeros
2025-02-18 15:22 ` Mark Brown
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 16:09 ` Alyssa Rosenzweig
2025-02-18 8:35 ` [PATCH v2 14/29] ASoC: tas2770: expose die temp to hwmon James Calligeros
2025-02-18 15:20 ` Guenter Roeck
2025-02-21 11:31 ` James Calligeros
2025-02-21 15:03 ` Guenter Roeck
2025-02-22 0:16 ` James Calligeros
2025-02-18 15:24 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 15/29] ASoC: tas2764: Export 'die_temp' to sysfs James Calligeros
2025-02-18 8:35 ` [PATCH v2 16/29] ASoC: tas2764: expose die temp to hwmon James Calligeros
2025-02-18 8:35 ` [PATCH v2 17/29] ASoC: tas2764: Crop SDOUT zero-out mask based on BCLK ratio James Calligeros
2025-02-18 15:25 ` Mark Brown
2025-02-18 15:55 ` Martin Povišer
2025-02-18 8:35 ` [PATCH v2 18/29] ASoC: tas2764: Enable main IRQs James Calligeros
2025-02-18 15:26 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 19/29] ASoC: tas2764: Power up/down amp on mute ops James Calligeros
2025-02-18 8:35 ` [PATCH v2 20/29] ASoC: tas2764: Add SDZ regulator James Calligeros
2025-02-18 15:33 ` Mark Brown
2025-02-19 4:47 ` James Calligeros
2025-02-20 1:45 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 21/29] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG James Calligeros
2025-02-18 15:35 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 22/29] ASoC: tas2764: Mark SW_RESET as volatile James Calligeros
2025-02-18 8:35 ` [PATCH v2 23/29] ASoC: tas2764: Wait for ramp-down after shutdown James Calligeros
2025-02-18 8:35 ` [PATCH v2 24/29] ASoC: tas2770: Add SDZ regulator James Calligeros
2025-02-18 15:36 ` Mark Brown
2025-02-18 8:35 ` [PATCH v2 25/29] ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change James Calligeros
2025-02-18 8:36 ` [PATCH v2 26/29] ASoC: tas2770: Add zero-fill and pull-down controls James Calligeros
2025-02-18 15:37 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 27/29] ASoC: tas2770: Support setting the PDM TX slot James Calligeros
2025-02-18 8:36 ` [PATCH v2 28/29] ASoC: tas2764: Set the SDOUT polarity correctly James Calligeros
2025-02-18 15:38 ` Mark Brown
2025-02-18 8:36 ` [PATCH v2 29/29] ASoC: tas2770: " James Calligeros
2025-02-18 21:30 ` (subset) [PATCH v2 00/29] ASoC: tas27{64,70}: improve support for Apple codec variants Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250218-apple-codec-changes-v2-8-932760fd7e07@gmail.com \
--to=jcalligeros99@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jdelvare@suse.com \
--cc=kevin-lu@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marcan@marcan.st \
--cc=neal@gompa.dev \
--cc=perex@perex.cz \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=shenghao-ding@ti.com \
--cc=shifu0704@thundersoft.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).