[PATCH v1 2/2] hwmon: (amc6821) Add PWM polarity configuration with OF

[Francesco Dolcini <francesco@dolcini.it>]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

Add support to configure the PWM-Out pin polarity based on a device
tree property.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 drivers/hwmon/amc6821.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 1e3c6acd8974..1ea2d97eebca 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -845,7 +845,7 @@ static int amc6821_detect(struct i2c_client *client, struct i2c_board_info *info
 	return 0;
 }
 
-static int amc6821_init_client(struct amc6821_data *data)
+static int amc6821_init_client(struct i2c_client *client, struct amc6821_data *data)
 {
 	struct regmap *regmap = data->regmap;
 	int err;
@@ -864,6 +864,9 @@ static int amc6821_init_client(struct amc6821_data *data)
 		if (err)
 			return err;
 
+		if (of_property_read_bool(client->dev.of_node, "ti,pwm-inverted"))
+			pwminv = 1;
+
 		err = regmap_update_bits(regmap, AMC6821_REG_CONF1,
 					 AMC6821_CONF1_THERMOVIE | AMC6821_CONF1_FANIE |
 					 AMC6821_CONF1_START | AMC6821_CONF1_PWMINV,
@@ -916,7 +919,7 @@ static int amc6821_probe(struct i2c_client *client)
 				     "Failed to initialize regmap\n");
 	data->regmap = regmap;
 
-	err = amc6821_init_client(data);
+	err = amc6821_init_client(client, data);
 	if (err)
 		return err;
 
-- 
2.39.5