devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <patrice.chotard@foss.st.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Cc: <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <christophe.kerello@foss.st.com>,
	<patrice.chotard@foss.st.com>
Subject: [PATCH v5 5/8] arm64: dts: st: Add OMM node on stm32mp251
Date: Wed, 19 Feb 2025 09:00:56 +0100	[thread overview]
Message-ID: <20250219080059.367045-6-patrice.chotard@foss.st.com> (raw)
In-Reply-To: <20250219080059.367045-1-patrice.chotard@foss.st.com>

From: Patrice Chotard <patrice.chotard@foss.st.com>

Add Octo Memory Manager (OMM) entry on stm32mp251 and its two
OSPI instance.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 48 ++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index f3c6cdfd7008..2565236e369f 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -768,6 +768,54 @@ rng: rng@42020000 {
 				status = "disabled";
 			};
 
+			ommanager: ommanager@40500000 {
+				compatible = "st,stm32mp25-omm";
+				reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+				reg-names = "regs", "memory_map";
+				ranges = <0 0 0x40430000 0x400>,
+					 <1 0 0x40440000 0x400>;
+				clocks = <&rcc CK_BUS_OSPIIOM>;
+				resets = <&rcc OSPIIOM_R>;
+				access-controllers = <&rifsc 111>;
+				power-domains = <&CLUSTER_PD>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+				status = "disabled";
+
+				ospi1: spi@40430000 {
+					compatible = "st,stm32mp25-ospi";
+					reg = <0 0 0x400>;
+					interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&hpdma 2 0x62 0x00003121>,
+					       <&hpdma 2 0x42 0x00003112>;
+					dma-names = "tx", "rx";
+					clocks = <&scmi_clk CK_SCMI_OSPI1>;
+					resets = <&scmi_reset RST_SCMI_OSPI1>,
+						 <&scmi_reset RST_SCMI_OSPI1DLL>;
+					access-controllers = <&rifsc 74>;
+					power-domains = <&CLUSTER_PD>;
+					st,syscfg-dlyb = <&syscfg 0x1000>;
+					status = "disabled";
+				};
+
+				ospi2: spi@40440000 {
+					compatible = "st,stm32mp25-ospi";
+					reg = <1 0 0x400>;
+					interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&hpdma 3 0x62 0x00003121>,
+					       <&hpdma 3 0x42 0x00003112>;
+					dma-names = "tx", "rx";
+					clocks = <&scmi_clk CK_SCMI_OSPI2>;
+					resets = <&scmi_reset RST_SCMI_OSPI2>,
+						 <&scmi_reset RST_SCMI_OSPI2DLL>;
+					access-controllers = <&rifsc 75>;
+					power-domains = <&CLUSTER_PD>;
+					st,syscfg-dlyb = <&syscfg 0x1400>;
+					status = "disabled";
+				};
+			};
+
 			spi8: spi@46020000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-- 
2.25.1


  parent reply	other threads:[~2025-02-19  8:03 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-19  8:00 [PATCH v5 0/8] Add STM32MP25 SPI NOR support patrice.chotard
2025-02-19  8:00 ` [PATCH v5 1/8] dt-bindings: spi: Add STM32 OSPI controller patrice.chotard
2025-02-19  8:00 ` [PATCH v5 2/8] spi: stm32: Add OSPI driver patrice.chotard
2025-02-19  8:00 ` [PATCH v5 3/8] dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller patrice.chotard
2025-02-19  8:00 ` [PATCH v5 4/8] memory: Add STM32 Octo Memory Manager driver patrice.chotard
2025-03-10 13:52   ` Patrice CHOTARD
2025-03-10 14:10     ` Krzysztof Kozlowski
2025-03-13  7:30     ` Krzysztof Kozlowski
2025-03-11 16:04   ` Krzysztof Kozlowski
2025-03-12 14:23     ` Patrice CHOTARD
2025-03-13  7:33       ` Krzysztof Kozlowski
2025-03-18 13:40         ` Patrice CHOTARD
2025-03-19  7:37           ` Krzysztof Kozlowski
2025-03-20 13:28             ` Patrice CHOTARD
2025-02-19  8:00 ` patrice.chotard [this message]
2025-02-19  8:00 ` [PATCH v5 6/8] arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi patrice.chotard
2025-02-19  8:00 ` [PATCH v5 7/8] arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board patrice.chotard
2025-02-19  8:00 ` [PATCH v5 8/8] arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver patrice.chotard
2025-03-04 13:39 ` (subset) [PATCH v5 0/8] Add STM32MP25 SPI NOR support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250219080059.367045-6-patrice.chotard@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=christophe.kerello@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).