From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Krishna Manikandan <quic_mkrishn@quicinc.com>,
Jonathan Marek <jonathan@marek.ca>,
Kuogee Hsieh <quic_khsieh@quicinc.com>,
Neil Armstrong <neil.armstrong@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Srini Kandagatla <srinivas.kandagatla@linaro.org>,
Rob Clark <robdclark@chromium.org>
Subject: [PATCH v3 20/21] drm/msm/dpu: Implement LM crossbar for v12.0 DPU
Date: Fri, 21 Feb 2025 16:24:30 +0100 [thread overview]
Message-ID: <20250221-b4-sm8750-display-v3-20-3ea95b1630ea@linaro.org> (raw)
In-Reply-To: <20250221-b4-sm8750-display-v3-0-3ea95b1630ea@linaro.org>
v12.0 DPU on SM8750 comes with new LM crossbar that requires each pipe
rectangle to be programmed separately in blend stage. Implement support
for this along with a new CTL_LAYER_ACTIVE register and setting the
blend stage in layer mixer code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
1. New patch, split from previous big DPU v12.0.
---
drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 18 +++-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 6 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 27 +++++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 9 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c | 126 ++++++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h | 18 ++++
6 files changed, 201 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index a362a622bc678e11c4e7ed8a05901ad18ccf38a9..84f10a88acbdec6471ae46d8a91fcc85e01d9a4f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -523,6 +523,7 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
struct dpu_hw_ctl *ctl;
struct dpu_hw_mixer *lm;
struct dpu_hw_stage_cfg stage_cfg;
+ DECLARE_BITMAP(active_lms, LM_MAX);
int i;
DRM_DEBUG_ATOMIC("%s\n", dpu_crtc->name);
@@ -536,10 +537,14 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
mixer[i].lm_ctl->ops.set_active_fetch_pipes(mixer[i].lm_ctl, NULL);
if (mixer[i].lm_ctl->ops.set_active_pipes)
mixer[i].lm_ctl->ops.set_active_pipes(mixer[i].lm_ctl, NULL);
+
+ if (mixer[i].hw_lm->ops.clear_all_blendstages)
+ mixer[i].hw_lm->ops.clear_all_blendstages(mixer[i].hw_lm);
}
/* initialize stage cfg */
memset(&stage_cfg, 0, sizeof(struct dpu_hw_stage_cfg));
+ memset(active_lms, 0, sizeof(active_lms));
_dpu_crtc_blend_setup_mixer(crtc, dpu_crtc, mixer, &stage_cfg);
@@ -553,13 +558,22 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
ctl->ops.update_pending_flush_mixer(ctl,
mixer[i].hw_lm->idx);
+ set_bit(lm->idx, active_lms);
+ if (ctl->ops.set_active_lms)
+ ctl->ops.set_active_lms(ctl, active_lms);
+
DRM_DEBUG_ATOMIC("lm %d, op_mode 0x%X, ctl %d\n",
mixer[i].hw_lm->idx - LM_0,
mixer[i].mixer_op_mode,
ctl->idx - CTL_0);
- ctl->ops.setup_blendstage(ctl, mixer[i].hw_lm->idx,
- &stage_cfg);
+ if (ctl->ops.setup_blendstage)
+ ctl->ops.setup_blendstage(ctl, mixer[i].hw_lm->idx,
+ &stage_cfg);
+
+ if (lm->ops.setup_blendstage)
+ lm->ops.setup_blendstage(lm, mixer[i].hw_lm->idx,
+ &stage_cfg);
}
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 2b2b49fd769bd91634201e8921c1830473fc25c7..b2d4a13222fcab6ffe31cb407f794ef212c23878 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2200,6 +2200,12 @@ static void dpu_encoder_helper_reset_mixers(struct dpu_encoder_phys *phys_enc)
if (phys_enc->hw_ctl->ops.setup_blendstage)
phys_enc->hw_ctl->ops.setup_blendstage(ctl, hw_mixer[i]->idx, NULL);
+ if (hw_mixer[i]->ops.clear_all_blendstages)
+ hw_mixer[i]->ops.clear_all_blendstages(hw_mixer[i]);
+
+ if (ctl->ops.set_active_lms)
+ ctl->ops.set_active_lms(ctl, NULL);
+
if (ctl->ops.set_active_fetch_pipes)
ctl->ops.set_active_fetch_pipes(ctl, NULL);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 3e0bdd1100ebb0d302a852ceeaf8af86835e69a1..8b6b60f5e6206078f1df98b20f77ed91049e6ef0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -41,6 +41,7 @@
#define CTL_CDM_FLUSH 0x114
#define CTL_PERIPH_FLUSH 0x128
#define CTL_PIPE_ACTIVE 0x12C
+#define CTL_LAYER_ACTIVE 0x130
#define CTL_INTF_MASTER 0x134
#define CTL_DSPP_n_FLUSH(n) ((0x13C) + ((n) * 4))
@@ -62,6 +63,8 @@ static const u32 fetch_tbl[SSPP_MAX] = {CTL_INVALID_BIT, 16, 17, 18, 19,
CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, 0,
1, 2, 3, 4, 5};
+static const u32 lm_tbl[LM_MAX] = {CTL_INVALID_BIT, 0, 1, 2, 3, 4, 5, 6, 7};
+
static int _mixer_stages(const struct dpu_lm_cfg *mixer, int count,
enum dpu_lm lm)
{
@@ -649,7 +652,11 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
merge3d_active);
}
- dpu_hw_ctl_clear_all_blendstages(ctx);
+ if (ctx->ops.clear_all_blendstages)
+ ctx->ops.clear_all_blendstages(ctx);
+
+ if (ctx->ops.set_active_lms)
+ ctx->ops.set_active_lms(ctx, NULL);
if (ctx->ops.set_active_fetch_pipes)
ctx->ops.set_active_fetch_pipes(ctx, NULL);
@@ -716,6 +723,23 @@ static void dpu_hw_ctl_set_active_pipes(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(&ctx->hw, CTL_PIPE_ACTIVE, val);
}
+static void dpu_hw_ctl_set_active_lms(struct dpu_hw_ctl *ctx,
+ unsigned long *active_lms)
+{
+ int i;
+ u32 val = 0;
+
+ if (active_lms) {
+ for (i = LM_0; i < LM_MAX; i++) {
+ if (test_bit(i, active_lms) &&
+ lm_tbl[i] != CTL_INVALID_BIT)
+ val |= BIT(lm_tbl[i]);
+ }
+ }
+
+ DPU_REG_WRITE(&ctx->hw, CTL_LAYER_ACTIVE, val);
+}
+
/**
* dpu_hw_ctl_init() - Initializes the ctl_path hw driver object.
* Should be called before accessing any ctl_path register.
@@ -783,6 +807,7 @@ struct dpu_hw_ctl *dpu_hw_ctl_init(struct drm_device *dev,
c->ops.setup_blendstage = dpu_hw_ctl_setup_blendstage;
} else {
c->ops.set_active_pipes = dpu_hw_ctl_set_active_pipes;
+ c->ops.set_active_lms = dpu_hw_ctl_set_active_lms;
}
c->ops.update_pending_flush_sspp = dpu_hw_ctl_update_pending_flush_sspp;
c->ops.update_pending_flush_mixer = dpu_hw_ctl_update_pending_flush_mixer;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 40c8190a329f331401b9503f047c1e74f970eefe..7175dfecea1057db3fa16fbfd4139182a53d1760 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -253,6 +253,15 @@ struct dpu_hw_ctl_ops {
*/
void (*set_active_pipes)(struct dpu_hw_ctl *ctx,
unsigned long *active_pipes);
+
+ /**
+ * Set active layer mixers attached to this CTL
+ * @ctx: ctl path ctx pointer
+ * @active_lms: bitmap of enum dpu_lm
+ */
+ void (*set_active_lms)(struct dpu_hw_ctl *ctx,
+ unsigned long *active_lms);
+
};
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
index 75bf3521b03c8e243ccfe1fc226aa71f23b296df..c631b4ae8dc13b7b18fab4721a7b2f2d97da717a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c
@@ -28,11 +28,19 @@
#define LM_FG_COLOR_FILL_XY 0x14
/* >= v12 DPU */
+#define LM_BG_SRC_SEL_V12 0x14
+#define LM_BG_SRC_SEL_V12_RESET_VALUE 0x0000C0C0
#define LM_BORDER_COLOR_0_V12 0x1C
#define LM_BORDER_COLOR_1_V12 0x20
/* >= v12 DPU with offset to mixer base + stage base */
+#define LM_BLEND0_FG_SRC_SEL_V12 0x04
#define LM_BLEND0_CONST_ALPHA_V12 0x08
+#define LM_FG_COLOR_FILL_COLOR_0_V12 0x0C
+#define LM_FG_COLOR_FILL_COLOR_1_V12 0x10
+#define LM_FG_COLOR_FILL_SIZE_V12 0x14
+#define LM_FG_COLOR_FILL_XY_V12 0x18
+
#define LM_BLEND0_FG_ALPHA 0x04
#define LM_BLEND0_BG_ALPHA 0x08
@@ -215,6 +223,122 @@ static void dpu_hw_lm_setup_color3_v12(struct dpu_hw_mixer *ctx,
}
}
+static int _set_staged_sspp(u32 stage, struct dpu_hw_stage_cfg *stage_cfg,
+ int pipes_per_stage, u32 *value)
+{
+ int i;
+ u32 pipe_type = 0, pipe_id = 0, rec_id = 0;
+ u32 src_sel[PIPES_PER_STAGE];
+
+ *value = LM_BG_SRC_SEL_V12_RESET_VALUE;
+ if (!stage_cfg || !pipes_per_stage)
+ return 0;
+
+ for (i = 0; i < pipes_per_stage; i++) {
+ enum dpu_sspp pipe = stage_cfg->stage[stage][i];
+ enum dpu_sspp_multirect_index rect_index = stage_cfg->multirect_index[stage][i];
+
+ src_sel[i] = LM_BG_SRC_SEL_V12_RESET_VALUE;
+
+ if (!pipe)
+ continue;
+
+ /* translate pipe data to SWI pipe_type, pipe_id */
+ if (pipe >= SSPP_DMA0 && pipe <= SSPP_DMA5) {
+ pipe_type = 0;
+ pipe_id = pipe - SSPP_DMA0;
+ } else if (pipe >= SSPP_VIG0 && pipe <= SSPP_VIG3) {
+ pipe_type = 1;
+ pipe_id = pipe - SSPP_VIG0;
+ } else {
+ DPU_ERROR("invalid rec-%d pipe:%d\n", i, pipe);
+ return -EINVAL;
+ }
+
+ /* translate rec data to SWI rec_id */
+ if (rect_index == DPU_SSPP_RECT_SOLO || rect_index == DPU_SSPP_RECT_0) {
+ rec_id = 0;
+ } else if (rect_index == DPU_SSPP_RECT_1) {
+ rec_id = 1;
+ } else {
+ DPU_ERROR("invalid rec-%d rect_index:%d\n", i, rect_index);
+ rec_id = 0;
+ }
+
+ /* calculate SWI value for rec-0 and rec-1 and store it temporary buffer */
+ src_sel[i] = (((pipe_type & 0x3) << 6) | ((rec_id & 0x3) << 4) | (pipe_id & 0xf));
+ }
+
+ /* calculate final SWI register value for rec-0 and rec-1 */
+ *value = 0;
+ for (i = 0; i < pipes_per_stage; i++)
+ *value |= src_sel[i] << (i * 8);
+
+ return 0;
+}
+
+static int dpu_hw_lm_setup_blendstage(struct dpu_hw_mixer *ctx, enum dpu_lm lm,
+ struct dpu_hw_stage_cfg *stage_cfg)
+{
+ struct dpu_hw_blk_reg_map *c = &ctx->hw;
+ int i, ret, stages, stage_off, pipes_per_stage;
+ u32 value;
+
+ stages = ctx->cap->sblk->maxblendstages;
+ if (stages <= 0)
+ return -EINVAL;
+
+ if (ctx->cap->sourcesplit)
+ pipes_per_stage = PIPES_PER_STAGE;
+ else
+ pipes_per_stage = 1;
+
+ /*
+ * When stage configuration is empty, we can enable the
+ * border color by setting the corresponding LAYER_ACTIVE bit
+ * and un-staging all the pipes from the layer mixer.
+ */
+ if (!stage_cfg)
+ DPU_REG_WRITE(c, LM_BG_SRC_SEL_V12, LM_BG_SRC_SEL_V12_RESET_VALUE);
+
+ for (i = DPU_STAGE_0; i <= stages; i++) {
+ stage_off = _stage_offset(ctx, i);
+ if (stage_off < 0)
+ return stage_off;
+
+ ret = _set_staged_sspp(i, stage_cfg, pipes_per_stage, &value);
+ if (ret)
+ return ret;
+
+ DPU_REG_WRITE(c, LM_BLEND0_FG_SRC_SEL_V12 + stage_off, value);
+ }
+
+ return 0;
+}
+
+static int dpu_hw_lm_clear_all_blendstages(struct dpu_hw_mixer *ctx)
+{
+ struct dpu_hw_blk_reg_map *c = &ctx->hw;
+ int i, stages, stage_off;
+
+ stages = ctx->cap->sblk->maxblendstages;
+ if (stages <= 0)
+ return -EINVAL;
+
+ DPU_REG_WRITE(c, LM_BG_SRC_SEL_V12, LM_BG_SRC_SEL_V12_RESET_VALUE);
+
+ for (i = DPU_STAGE_0; i <= stages; i++) {
+ stage_off = _stage_offset(ctx, i);
+ if (stage_off < 0)
+ return stage_off;
+
+ DPU_REG_WRITE(c, LM_BLEND0_FG_SRC_SEL_V12 + stage_off,
+ LM_BG_SRC_SEL_V12_RESET_VALUE);
+ }
+
+ return 0;
+}
+
/**
* dpu_hw_lm_init() - Initializes the mixer hw driver object.
* should be called once before accessing every mixer.
@@ -257,6 +381,8 @@ struct dpu_hw_mixer *dpu_hw_lm_init(struct drm_device *dev,
c->ops.setup_border_color = dpu_hw_lm_setup_border_color;
} else {
c->ops.setup_alpha_out = dpu_hw_lm_setup_color3_v12;
+ c->ops.setup_blendstage = dpu_hw_lm_setup_blendstage;
+ c->ops.clear_all_blendstages = dpu_hw_lm_clear_all_blendstages;
c->ops.setup_border_color = dpu_hw_lm_setup_border_color_v12;
}
c->ops.setup_misr = dpu_hw_lm_setup_misr;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
index fff1156add683fec8ce6785e7fe1d769d0de3fe0..1b9ecd082d7fd72b07008787e1caea968ed23376 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h
@@ -11,6 +11,7 @@
#include "dpu_hw_util.h"
struct dpu_hw_mixer;
+struct dpu_hw_stage_cfg;
struct dpu_hw_mixer_cfg {
u32 out_width;
@@ -48,6 +49,23 @@ struct dpu_hw_lm_ops {
*/
void (*setup_alpha_out)(struct dpu_hw_mixer *ctx, uint32_t mixer_op);
+ /**
+ * Clear layer mixer to pipe configuration
+ * @ctx : mixer ctx pointer
+ * Returns: 0 on success or -error
+ */
+ int (*clear_all_blendstages)(struct dpu_hw_mixer *ctx);
+
+ /**
+ * Configure layer mixer to pipe configuration
+ * @ctx : mixer ctx pointer
+ * @lm : layer mixer enumeration
+ * @stage_cfg : blend stage configuration
+ * Returns: 0 on success or -error
+ */
+ int (*setup_blendstage)(struct dpu_hw_mixer *ctx, enum dpu_lm lm,
+ struct dpu_hw_stage_cfg *stage_cfg);
+
/**
* setup_border_color : enable/disable border color
*/
--
2.43.0
next prev parent reply other threads:[~2025-02-21 15:25 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 15:24 [PATCH v3 00/21] drm/msm: Add support for SM8750 Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 01/21] dt-bindings: display/msm: dsi-controller-main: Combine if:then: entries Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 02/21] dt-bindings: display/msm: dsi-controller-main: Add missing minItems Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 03/21] dt-bindings: display/msm: dsi-phy-7nm: Add SM8750 Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 04/21] dt-bindings: display/msm: dsi-controller-main: " Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 05/21] dt-bindings: display/msm: dp-controller: " Krzysztof Kozlowski
2025-02-24 17:22 ` Rob Herring (Arm)
2025-02-21 15:24 ` [PATCH v3 06/21] dt-bindings: display/msm: qcom,sm8650-dpu: " Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 07/21] dt-bindings: display/msm: qcom,sm8750-mdss: " Krzysztof Kozlowski
2025-02-24 17:23 ` Rob Herring (Arm)
2025-02-21 15:24 ` [PATCH v3 08/21] drm/msm/dpu: Add missing "fetch" name to set_active_pipes() Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 09/21] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer reset Krzysztof Kozlowski
2025-02-21 16:11 ` Dmitry Baryshkov
2025-02-21 15:24 ` [PATCH v3 10/21] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path reset Krzysztof Kozlowski
2025-02-21 16:11 ` Dmitry Baryshkov
2025-02-21 15:24 ` [PATCH v3 11/21] drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setup Krzysztof Kozlowski
2025-02-21 16:12 ` Dmitry Baryshkov
2025-02-21 15:24 ` [PATCH v3 12/21] drm/msm/dpu: Drop useless comments Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 13/21] drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5 Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 14/21] drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush mask Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 15/21] drm/msm/dsi/phy: Add support for SM8750 Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 16/21] drm/msm/dsi: " Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 17/21] drm/msm/dpu: " Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 18/21] drm/msm/dpu: Implement 10-bit color alpha for v12.0 DPU Krzysztof Kozlowski
2025-02-21 16:25 ` Dmitry Baryshkov
2025-03-11 13:41 ` Krzysztof Kozlowski
2025-02-21 15:24 ` [PATCH v3 19/21] drm/msm/dpu: Implement CTL_PIPE_ACTIVE " Krzysztof Kozlowski
2025-02-21 16:26 ` Dmitry Baryshkov
2025-03-11 13:42 ` Krzysztof Kozlowski
2025-02-21 15:24 ` Krzysztof Kozlowski [this message]
2025-02-21 16:27 ` [PATCH v3 20/21] drm/msm/dpu: Implement LM crossbar " Dmitry Baryshkov
2025-02-21 15:24 ` [PATCH v3 21/21] drm/msm/mdss: Add support for SM8750 Krzysztof Kozlowski
2025-03-08 5:43 ` [PATCH v3 00/21] drm/msm: " Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250221-b4-sm8750-display-v3-20-3ea95b1630ea@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=quic_mkrishn@quicinc.com \
--cc=robdclark@chromium.org \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=srinivas.kandagatla@linaro.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).