Re: [PATCH v3 3/5] PCI/pwrctrl: Skip scanning for the device further if pwrctrl device is created

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Thu, Feb 20, 2025 at 05:35:20PM -0600, Bjorn Helgaas wrote:
> On Thu, Jan 16, 2025 at 07:39:13PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > 
> > The pwrctrl core will rescan the bus once the device is powered on. So
> > there is no need to continue scanning for the device further.
> 
> > -/*
> > - * Create pwrctrl device (if required) for the PCI device to handle the power
> > - * state.
> > - */
> > -static void pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
> > +static struct platform_device *pci_pwrctrl_create_device(struct pci_bus *bus, int devfn)
> 
> > +	 * Create pwrctrl device (if required) for the PCI device to handle the
> > +	 * power state. If the pwrctrl device is created, then skip scanning
> > +	 * further as the pwrctrl core will rescan the bus after powering on
> > +	 * the device.
> 
> I know you only moved the first sentence, but I think "power state" is
> likely to be confused with the D0, D1, D2, D3hot, D3cold power
> management states.  Maybe we could reword this to talk about power
> control, power sequencing, power supplies, power regulators or
> something?
> 

Sure. It could be changed to "power control." I hope Krzysztof can ammend it in
the branch.

- Mani

-- 
மணிவண்ணன் சதாசிவம்