From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: "Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Mrinmay Sarkar" <quic_msarkar@quicinc.com>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 8/8] arm64: dts: qcom: sm8450: add PCIe EP device nodes
Date: Sat, 22 Feb 2025 22:23:38 +0530 [thread overview]
Message-ID: <20250222165338.oox3d63ven2kokez@thinkpad> (raw)
In-Reply-To: <20250221-sar2130p-pci-v3-8-61a0fdfb75b4@linaro.org>
On Fri, Feb 21, 2025 at 05:52:06PM +0200, Dmitry Baryshkov wrote:
> On the Qualcomm SM8450 platform the second PCIe host can be used
> either as an RC or as an EP device. Add device node for the PCIe EP.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Mani
> ---
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 62 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 9c809fc5fa45a98ff5441a0b6809931588897243..3783930d63a73158addc44d00d9da2efa0986a25 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2262,6 +2262,68 @@ pcie@0 {
> };
> };
>
> + pcie1_ep: pcie-ep@1c08000 {
> + compatible = "qcom,sm8450-pcie-ep";
> + reg = <0x0 0x01c08000 0x0 0x3000>,
> + <0x0 0x40000000 0x0 0xf1d>,
> + <0x0 0x40000f20 0x0 0xa8>,
> + <0x0 0x40001000 0x0 0x1000>,
> + <0x0 0x40200000 0x0 0x1000000>,
> + <0x0 0x01c0b000 0x0 0x1000>,
> + <0x0 0x40002000 0x0 0x1000>;
> + reg-names = "parf",
> + "dbi",
> + "elbi",
> + "atu",
> + "addr_space",
> + "mmio",
> + "dma";
> +
> + clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> + <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "ref",
> + "ddrss_sf_tbu",
> + "aggre_noc_axi";
> +
> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "global",
> + "doorbell",
> + "dma";
> +
> + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "pcie-mem",
> + "cpu-pcie";
> +
> + iommus = <&apps_smmu 0x1c80 0x7f>;
> + resets = <&gcc GCC_PCIE_1_BCR>;
> + reset-names = "core";
> + power-domains = <&gcc PCIE_1_GDSC>;
> + phys = <&pcie1_phy>;
> + phy-names = "pciephy";
> + num-lanes = <2>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie1_default_state>;
> +
> + status = "disabled";
> + };
> +
> pcie1_phy: phy@1c0e000 {
> compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
> reg = <0 0x01c0e000 0 0x2000>;
>
> --
> 2.39.5
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2025-02-22 16:53 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 15:51 [PATCH v3 0/8] PCI: qcom-ep: add support for using the EP on SAR2130P and SM8450 Dmitry Baryshkov
2025-02-21 15:51 ` [PATCH v3 1/8] dt-bindings: PCI: qcom-ep: describe optional dma-coherent property Dmitry Baryshkov
2025-02-22 10:31 ` Krzysztof Kozlowski
2025-02-22 16:45 ` Manivannan Sadhasivam
2025-02-21 15:52 ` [PATCH v3 2/8] dt-bindings: PCI: qcom-ep: describe optional IOMMU Dmitry Baryshkov
2025-02-22 10:32 ` Krzysztof Kozlowski
2025-02-22 16:45 ` Manivannan Sadhasivam
2025-02-21 15:52 ` [PATCH v3 3/8] dt-bindings: PCI: qcom-ep: enable DMA for SM8450 Dmitry Baryshkov
2025-02-22 10:32 ` Krzysztof Kozlowski
2025-02-21 15:52 ` [PATCH v3 4/8] dt-bindings: PCI: qcom-ep: consolidate DMA vs non-DMA usecases Dmitry Baryshkov
2025-02-22 10:40 ` Krzysztof Kozlowski
2025-02-22 16:47 ` Manivannan Sadhasivam
2025-02-21 15:52 ` [PATCH v3 5/8] dt-bindings: PCI: qcom-ep: add SAR2130P compatible Dmitry Baryshkov
2025-02-22 10:41 ` Krzysztof Kozlowski
2025-02-21 15:52 ` [PATCH v3 6/8] PCI: dwc: pcie-qcom-ep: enable EP support for SAR2130P Dmitry Baryshkov
2025-02-22 16:50 ` Manivannan Sadhasivam
2025-02-22 18:06 ` Dmitry Baryshkov
2025-02-23 8:48 ` Manivannan Sadhasivam
2025-02-21 15:52 ` [PATCH v3 7/8] arm64: dts: qcom: sar2130p: add PCIe EP device nodes Dmitry Baryshkov
2025-02-21 18:59 ` Konrad Dybcio
2025-02-22 16:51 ` Manivannan Sadhasivam
2025-02-21 15:52 ` [PATCH v3 8/8] arm64: dts: qcom: sm8450: " Dmitry Baryshkov
2025-02-22 16:53 ` Manivannan Sadhasivam [this message]
2025-02-22 14:36 ` [PATCH v3 0/8] PCI: qcom-ep: add support for using the EP on SAR2130P and SM8450 Krzysztof Wilczyński
2025-02-24 18:36 ` Krzysztof Wilczyński
2025-02-25 3:19 ` Dmitry Baryshkov
2025-03-14 20:00 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250222165338.oox3d63ven2kokez@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=quic_msarkar@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox