[PATCH v9 00/12] This is continued work on Samsung S9(SM-9600) starqltechn

[PATCH v9 00/12] This is continued work on Samsung S9(SM-9600) starqltechn

[Dzmitry Sankouski]

Contains starqltechn device tree changes.
Add support for new features:
- sound (headphones and mics only)
- gpu
- panel
- buttons
- MAX77705 MFD:
  - charger
  - fuelgauge
  - haptic
  - led

Binding Dependencies:
- s2dos05: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-264309aa66de@gmail.com
  - This series was applied to krzk/linux.git (for-next)

- max77705: https://lore.kernel.org/r/20241209-starqltechn_integration_upstream-v11-4-dc0598828e01@gmail.com
  - applied to
    git@gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git

- s6e3ha8 panel: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-0-8336b9cd6c34@gmail.com
  - applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

Runtime Dependencies:
- gcc845 gp clock: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-dd75c06c708d@gmail.com
  - applied to clk-next

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v9:
- update applied dependency patchsets
- Link to v8: https://lore.kernel.org/r/20241209-starqltechn_integration_upstream-v8-0-ec604481d691@gmail.com

Changes in v8:
- add reviewed tags
- minor fixes
- remove 'reg' property in fuel-gauge to comply with v11 max77705 mfd
- Link to v7: https://lore.kernel.org/r/20241205-starqltechn_integration_upstream-v7-0-84f9a3547803@gmail.com

Changes in v7:
- review fixes.
- new patch with dt-binding header for wcd934x
- Link to v6: https://lore.kernel.org/r/20241008-starqltechn_integration_upstream-v6-0-5445365d3052@gmail.com

Changes in v6:
- refactor: no space between tags in commit message
- rename starqltechn to sdm845-starqltechn in commit summaries
- Link to v5: https://lore.kernel.org/r/20240926-starqltechn_integration_upstream-v5-0-d2084672ff2f@gmail.com

Changes in v5:
- Split patchset per subsystem
- Add links to subsystem patchsets in description
- Link to v4: https://lore.kernel.org/r/20240913-starqltechn_integration_upstream-v4-0-2d2efd5c5877@gmail.com

Changes in v4:
- Rewrite max77705, max77705_charger, max77705_fuel_gauge from scratch
- Reorder patches:
  - squash max77705 subdevice bindings in core file because
    no resources there
  - split device tree changes
- Use _ as space for filenames in power/supply like the majority
- Replace gcc-845 freq_tbl frequencies patch with new approach,
  based on automatic m/n/pre_div value generation
- Link to v3: https://lore.kernel.org/r/20240618-starqltechn_integration_upstream-v3-0-e3f6662017ac@gmail.com

Changes in version 3:
- disable crypto patch removed(disabled on distro level)
- dts framebuffer node along with related patches removed,
because panel driver added
- fix 'make O=.output_arm64 CHECK_DTBS=y qcom/sdm845-samsung-starqltechn.dtb'
errors, but it still complains on 'monitored-battery' and
'power-supplies' though I have 'power-supply.yaml' link in charger
and fuel gauge bindings.

---
Dzmitry Sankouski (12):
      arm64: dts: qcom: sdm845: enable gmu
      arm64: dts: qcom: sdm845-starqltechn: remove wifi
      arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
      arm64: dts: qcom: sdm845-starqltechn: refactor node order
      arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
      arm64: dts: qcom: sdm845-starqltechn: add gpio keys
      arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
      arm64: dts: qcom: sdm845-starqltechn: add display PMIC
      arm64: dts: qcom: sdm845-starqltechn: add touchscreen support
      arm64: dts: qcom: sdm845-starqltechn: add initial sound support
      arm64: dts: qcom: sdm845-starqltechn: add graphics support
      arm64: dts: qcom: sdm845-starqltechn: add modem support

 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi                   |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts                   |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts                      |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi          |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts      | 600 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts            |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi        |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |   4 ---
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts           |   4 ---
 arch/arm64/boot/dts/qcom/sdm845.dtsi                         |   2 --
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts         |   4 ---
 11 files changed, 591 insertions(+), 47 deletions(-)
---
base-commit: d4b0fd87ff0d4338b259dc79b2b3c6f7e70e8afa
change-id: 20240617-starqltechn_integration_upstream-bc86850b2fe3

Best regards,
-- 
Dzmitry Sankouski <dsankouski@gmail.com>

[PATCH v9 01/12] arm64: dts: qcom: sdm845: enable gmu

[Dzmitry Sankouski]

Leave gmu enabled, because it's only probed when
GPU is.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v5:
- delete gmu node from sdm850-lenovo-yoga-c630
  (it's imported from sdm845.dtsi)
---
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi                   | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts                   | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts                      | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi          | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts            | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi        | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts           | 4 ----
 arch/arm64/boot/dts/qcom/sdm845.dtsi                         | 2 --
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts         | 4 ----
 10 files changed, 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 743c339ba108..b7e514f81f92 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -741,10 +741,6 @@ touchscreen@10 {
 	};
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 1cc0f571e1f7..92f8cc7e2fed 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -444,10 +444,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 2391f842c903..d31efad8a321 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -414,10 +414,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 46e25c53829a..8a0f154bffc3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -345,10 +345,6 @@ &gcc {
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index ddb82ecb0a92..e5da58d11064 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -419,10 +419,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index b02a1dc5fecd..a3a304e1ac87 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -415,10 +415,6 @@ &gcc {
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 617b17b2d7d9..f790eb73abdd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -239,10 +239,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index e386b504e978..501575c9beda 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -381,10 +381,6 @@ &gcc {
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e0ce804bb1a3..dc939360f74c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4952,8 +4952,6 @@ gmu: gmu@506a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index f18050848cd8..ca81f3664abd 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -355,10 +355,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 	zap-shader {

-- 
2.39.5

[PATCH v9 02/12] arm64: dts: qcom: sdm845-starqltechn: remove wifi

[Dzmitry Sankouski]

Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..6fc30fd1262b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -418,14 +418,6 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
 

-- 
2.39.5

[PATCH v9 03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake

[Dzmitry Sankouski]

Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v8:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 6fc30fd1262b..f3f2b25883d8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -135,8 +135,6 @@ vdda_pll_cc_ebi23:
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +155,7 @@ vreg_l3a_1p0: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:

-- 
2.39.5

[PATCH v9 04/12] arm64: dts: qcom: sdm845-starqltechn: refactor node order

[Dzmitry Sankouski]

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index f3f2b25883d8..8a0d63bd594b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -382,8 +382,8 @@ &ufs_mem_phy {
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;

-- 
2.39.5

[PATCH v9 05/12] arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios

[Dzmitry Sankouski]

Starqltechn has 2 reserved gpio ranges <27 4>, <85 4>.
<27 4> is spi for eSE(embedded Secure Element).
<85 4> is spi for fingerprint.

Remove excess reserved gpio regions.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 8a0d63bd594b..5948b401165c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -418,7 +418,8 @@ &usb_1_qmpphy {
 };
 
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";

-- 
2.39.5

[PATCH v9 06/12] arm64: dts: qcom: sdm845-starqltechn: add gpio keys

[Dzmitry Sankouski]

Add support for phone buttons.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v8:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Changes in v7:
- s/_/-/ in node name
- rename key labels
- move pm8998_gpios with chg_int_default pin

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 5948b401165c..38c09e50ccfb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,9 +7,11 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
 
 / {
 	chassis-type = "handset";
@@ -69,6 +71,25 @@ memory@a1300000 {
 			pmsg-size = <0x40000>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "Bixby";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
 };
 
 
@@ -417,6 +438,11 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */

-- 
2.39.5

[PATCH v9 07/12] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC

[Dzmitry Sankouski]

Add support for max77705 MFD device. Supported sub-devices:
 charger, fuelgauge, haptic, led

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v9:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
- adjust haptic pwm period to match 19200 HZ, as in vendor settings
- move charger and fuel gauge node out of mfd node

Changes in v8:
- revert: add fuelgauge reg property
- rename chg_int_default to pmic_int_default, because used not only for
  charging

Changes in v7:
- adjust fuelgauge node for max17042 driver
  (remove monitored-battery because not supprted, rename
   shunt resistor property)
- reorder 'haptic' fixed regulator node
- move 'haptic' fixed regulator node to regulators
- change leds compatible *-led *-rgb
- wrap leds into multi-led node
- add fuelgauge reg property
- wrap led properties into multi-led
- add chg_int_default pinctrl

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: 'm' < 's', so putting motor tlmm nodes first

Changes in v5:
- fix according to binding changes
- reorder vib_pwm node
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 130 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 38c09e50ccfb..bd5c8b319ddf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
@@ -18,6 +19,16 @@ / {
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -32,6 +43,19 @@ framebuffer: framebuffer@9d400000 {
 		};
 	};
 
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -90,6 +114,17 @@ key-wink {
 			debounce-interval = <15>;
 		};
 	};
+
+	vib_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
+		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
 };
 
 
@@ -385,10 +420,79 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		leds {
+			compatible = "maxim,max77705-rgb";
+
+			multi-led {
+				color = <LED_COLOR_ID_RGB>;
+				function = LED_FUNCTION_STATUS;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_RED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+				};
+
+				led@3 {
+					reg = <3>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+		};
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 52084>;
+		};
+	};
+
+	max77705_charger: charger@69 {
+		reg = <0x69>;
+		compatible = "maxim,max77705-charger";
+		monitored-battery = <&battery>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+	};
+
+	fuel-gauge@36 {
+		reg = <0x36>;
+		compatible = "maxim,max77705-battery";
+		power-supplies = <&max77705_charger>;
+		maxim,rsns-microohm = <5000>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -443,10 +547,36 @@ &pm8998_resin {
 	status = "okay";
 };
 
+&pm8998_gpios {
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
 		bias-disable;

-- 
2.39.5

[PATCH v9 08/12] arm64: dts: qcom: sdm845-starqltechn: add display PMIC

[Dzmitry Sankouski]

Add support for s2dos05 display / touchscreen PMIC

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v9:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Changes in v7:
- move i2c21 node before gpio-keys

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: 'i' < 'm', so put tlmm i2c node before motor*

Changes in v5:
- simplify regulator names
- remove single buck index
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index bd5c8b319ddf..77abfadb4cc5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -40,6 +40,9 @@ framebuffer: framebuffer@9d400000 {
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
@@ -96,6 +99,66 @@ memory@a1300000 {
 		};
 	};
 
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -561,6 +624,20 @@ &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	motor_pwm_default_state: motor-pwm-active-state {
 		pins = "gpio57";
 		function = "gcc_gp1";

-- 
2.39.5

[PATCH v9 09/12] arm64: dts: qcom: sdm845-starqltechn: add touchscreen support

[Dzmitry Sankouski]

Add support for samsung,s6sy761 touchscreen.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v8:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 77abfadb4cc5..320add4697bf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -578,6 +578,23 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -682,4 +699,15 @@ sd_card_det_n_state: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };

-- 
2.39.5

[PATCH v9 10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support

[Dzmitry Sankouski]

Add support for sound (headphones and mics only)
Also redefine slpi reserved memory, because adsp_mem overlaps with
slpi_mem inherited from sdm845.dtsi.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v9:
- sort nodes alphabetically

Changes in v8:
- clarify FM with FM -> FM radio

Changes in v7:
- replace indeces with constants from dt-bindings/sound/qcom,wcd9340.h
- add spaces after 'link-name' node
- remove not connected digital mics from audio routing
- add DMIC(0|2) -> MCLK routing, because digital mics
  need clocks
- align mapping comments, add dmics comment

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 223 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 223 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 320add4697bf..762182331dc5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -11,8 +11,16 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
 
 / {
 	chassis-type = "handset";
@@ -97,6 +105,16 @@ memory@a1300000 {
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0xf00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
 	};
 
 	i2c21 {
@@ -595,6 +613,211 @@ touchscreen@48 {
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing =	"RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",	/* Headset Mic */
+			"AMIC3", "MIC BIAS2",	/* FM radio left Tx */
+			"AMIC4", "MIC BIAS2",	/* FM radio right Tx */
+			"DMIC0", "MCLK",	/* Bottom Mic */
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",	/* Top Mic */
+			"DMIC2", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+
+		codec {
+			sound-dai = <&wcd9340 AIF3_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
 &usb_1 {
 	status = "okay";
 };

-- 
2.39.5

[PATCH v9 11/12] arm64: dts: qcom: sdm845-starqltechn: add graphics support

[Dzmitry Sankouski]

Add support for gpu and panel.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes for v9:
- add tag: Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Changes for v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: remove 'sde' prefix in tlmm dsi nodes
- refactor: place tlmm dsi nodes alphabetically

Changes for v5:
- fix label names
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 762182331dc5..1202d8fc6b9d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -208,6 +208,52 @@ vib_pwm: pwm {
 	};
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&dsi_default &dsi_te>;
+		pinctrl-1 = <&dsi_suspend &dsi_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -864,6 +910,27 @@ &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	dsi_default: dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_te: dsi-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	i2c21_sda_state: i2c21-sda-state {
 		pins = "gpio127";
 		function = "gpio";

-- 
2.39.5

[PATCH v9 12/12] arm64: dts: qcom: sdm845-starqltechn: add modem support

[Dzmitry Sankouski]

Add support for modem and ipa(IP Accelerator).
Add spss reserved memory node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 1202d8fc6b9d..d686531bf4ea 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -19,6 +19,8 @@
 #include "pm8998.dtsi"
 #include "sdm845-wcd9340.dtsi"
 
+/delete-node/ &rmtfs_mem;
+/delete-node/ &spss_mem;
 /delete-node/ &adsp_mem;
 /delete-node/ &slpi_mem;
 
@@ -106,15 +108,39 @@ memory@a1300000 {
 			pmsg-size = <0x40000>;
 		};
 
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			reg = <0 0x88f00000 0 0x1c00000>;
+			no-map;
+		};
+
 		slpi_mem: slpi@96700000 {
 			reg = <0 0x96700000 0 0xf00000>;
 			no-map;
 		};
 
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
 		adsp_mem: memory@97800000 {
 			reg = <0 0x97800000 0 0x2000000>;
 			no-map;
 		};
+
+		rmtfs_mem: rmtfs-mem@fde00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde00000 0 0x202000>;
+			qcom,use-guard-pages;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
 	};
 
 	i2c21 {
@@ -864,6 +890,19 @@ &wcd9340 {
 	qcom,micbias4-microvolt = <1800000>;
 };
 
+&mss_pil {
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+			"qcom/sdm845/starqltechn/modem.mbn";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };

-- 
2.39.5

Re: [PATCH v9 00/12] This is continued work on Samsung S9(SM-9600) starqltechn

[Rob Herring (Arm)]

On Tue, 25 Feb 2025 19:38:51 +0300, Dzmitry Sankouski wrote:
> Contains starqltechn device tree changes.
> Add support for new features:
> - sound (headphones and mics only)
> - gpu
> - panel
> - buttons
> - MAX77705 MFD:
>   - charger
>   - fuelgauge
>   - haptic
>   - led
> 
> Binding Dependencies:
> - s2dos05: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-264309aa66de@gmail.com
>   - This series was applied to krzk/linux.git (for-next)
> 
> - max77705: https://lore.kernel.org/r/20241209-starqltechn_integration_upstream-v11-4-dc0598828e01@gmail.com
>   - applied to
>     git@gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
> 
> - s6e3ha8 panel: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-0-8336b9cd6c34@gmail.com
>   - applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)
> 
> Runtime Dependencies:
> - gcc845 gp clock: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-dd75c06c708d@gmail.com
>   - applied to clk-next
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> ---
> Changes in v9:
> - update applied dependency patchsets
> - Link to v8: https://lore.kernel.org/r/20241209-starqltechn_integration_upstream-v8-0-ec604481d691@gmail.com
> 
> Changes in v8:
> - add reviewed tags
> - minor fixes
> - remove 'reg' property in fuel-gauge to comply with v11 max77705 mfd
> - Link to v7: https://lore.kernel.org/r/20241205-starqltechn_integration_upstream-v7-0-84f9a3547803@gmail.com
> 
> Changes in v7:
> - review fixes.
> - new patch with dt-binding header for wcd934x
> - Link to v6: https://lore.kernel.org/r/20241008-starqltechn_integration_upstream-v6-0-5445365d3052@gmail.com
> 
> Changes in v6:
> - refactor: no space between tags in commit message
> - rename starqltechn to sdm845-starqltechn in commit summaries
> - Link to v5: https://lore.kernel.org/r/20240926-starqltechn_integration_upstream-v5-0-d2084672ff2f@gmail.com
> 
> Changes in v5:
> - Split patchset per subsystem
> - Add links to subsystem patchsets in description
> - Link to v4: https://lore.kernel.org/r/20240913-starqltechn_integration_upstream-v4-0-2d2efd5c5877@gmail.com
> 
> Changes in v4:
> - Rewrite max77705, max77705_charger, max77705_fuel_gauge from scratch
> - Reorder patches:
>   - squash max77705 subdevice bindings in core file because
>     no resources there
>   - split device tree changes
> - Use _ as space for filenames in power/supply like the majority
> - Replace gcc-845 freq_tbl frequencies patch with new approach,
>   based on automatic m/n/pre_div value generation
> - Link to v3: https://lore.kernel.org/r/20240618-starqltechn_integration_upstream-v3-0-e3f6662017ac@gmail.com
> 
> Changes in version 3:
> - disable crypto patch removed(disabled on distro level)
> - dts framebuffer node along with related patches removed,
> because panel driver added
> - fix 'make O=.output_arm64 CHECK_DTBS=y qcom/sdm845-samsung-starqltechn.dtb'
> errors, but it still complains on 'monitored-battery' and
> 'power-supplies' though I have 'power-supply.yaml' link in charger
> and fuel gauge bindings.
> 
> ---
> Dzmitry Sankouski (12):
>       arm64: dts: qcom: sdm845: enable gmu
>       arm64: dts: qcom: sdm845-starqltechn: remove wifi
>       arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
>       arm64: dts: qcom: sdm845-starqltechn: refactor node order
>       arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
>       arm64: dts: qcom: sdm845-starqltechn: add gpio keys
>       arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
>       arm64: dts: qcom: sdm845-starqltechn: add display PMIC
>       arm64: dts: qcom: sdm845-starqltechn: add touchscreen support
>       arm64: dts: qcom: sdm845-starqltechn: add initial sound support
>       arm64: dts: qcom: sdm845-starqltechn: add graphics support
>       arm64: dts: qcom: sdm845-starqltechn: add modem support
> 
>  arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi                   |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts                   |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts                      |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi          |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts      | 600 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
>  arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts            |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi        |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts           |   4 ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi                         |   2 --
>  arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts         |   4 ---
>  11 files changed, 591 insertions(+), 47 deletions(-)
> ---
> base-commit: d4b0fd87ff0d4338b259dc79b2b3c6f7e70e8afa
> change-id: 20240617-starqltechn_integration_upstream-bc86850b2fe3
> 
> Best regards,
> --
> Dzmitry Sankouski <dsankouski@gmail.com>
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250225-starqltechn_integration_upstream-v9-0-a5d80375cb66@gmail.com:

arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dtb: /soc@0/geniqup@ac0000/i2c@a98000/pmic@66: failed to match any schema with compatible: ['maxim,max77705']
arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dtb: /soc@0/geniqup@ac0000/i2c@a98000/pmic@66/leds: failed to match any schema with compatible: ['maxim,max77705-rgb']
arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dtb: /soc@0/geniqup@ac0000/i2c@a98000/pmic@66/haptic: failed to match any schema with compatible: ['maxim,max77705-haptic']
arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dtb: /soc@0/geniqup@ac0000/i2c@a98000/charger@69: failed to match any schema with compatible: ['maxim,max77705-charger']

Re: [PATCH v9 00/12] This is continued work on Samsung S9(SM-9600) starqltechn

[Bjorn Andersson]

On Tue, 25 Feb 2025 19:38:51 +0300, Dzmitry Sankouski wrote:
> Contains starqltechn device tree changes.
> Add support for new features:
> - sound (headphones and mics only)
> - gpu
> - panel
> - buttons
> - MAX77705 MFD:
>   - charger
>   - fuelgauge
>   - haptic
>   - led
> 
> [...]

Applied, thanks!

[01/12] arm64: dts: qcom: sdm845: enable gmu
        commit: eb8b09e61bd2419263a15c37b068982be620eab6
[02/12] arm64: dts: qcom: sdm845-starqltechn: remove wifi
        commit: 2d3dd4b237638853b8a99353401ab8d88a6afb6c
[03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
        commit: 242e4126ee007b95765c21a9d74651fdcf221f2b
[04/12] arm64: dts: qcom: sdm845-starqltechn: refactor node order
        commit: cba1dd3d851ebc1b6c5ae4000208a9753320694b
[05/12] arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
        commit: fb5fce873b952f8b1c5f7edcabcc8611ef45ea7a
[06/12] arm64: dts: qcom: sdm845-starqltechn: add gpio keys
        commit: b58e67cd607e43b56f7cd509bdef0577d4658f10
[07/12] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
        commit: 7a88a931d09564b3ae84e7abd5cd412af1dd5280
[08/12] arm64: dts: qcom: sdm845-starqltechn: add display PMIC
        commit: 3a4600448befafe598f30d7e30aa89cef8226519
[09/12] arm64: dts: qcom: sdm845-starqltechn: add touchscreen support
        commit: 801733b4757ccef4dfce046639cf3ddeae7253b1
[10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support
        (no commit info)
[11/12] arm64: dts: qcom: sdm845-starqltechn: add graphics support
        (no commit info)
[12/12] arm64: dts: qcom: sdm845-starqltechn: add modem support
        (no commit info)

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH v9 00/12] This is continued work on Samsung S9(SM-9600) starqltechn

[Bjorn Andersson]

On Tue, 25 Feb 2025 19:38:51 +0300, Dzmitry Sankouski wrote:
> Contains starqltechn device tree changes.
> Add support for new features:
> - sound (headphones and mics only)
> - gpu
> - panel
> - buttons
> - MAX77705 MFD:
>   - charger
>   - fuelgauge
>   - haptic
>   - led
> 
> [...]

Applied, thanks!

[10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support
        commit: 58782c229e3e17100657af8cfa4b962b76244f4e
[11/12] arm64: dts: qcom: sdm845-starqltechn: add graphics support
        commit: 70005c18c9f7e1afd432b989002f379032c893b8
[12/12] arm64: dts: qcom: sdm845-starqltechn: add modem support
        commit: b20bb726603e16ce68876a309fec49335ed5ffe0

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>