From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Svyatoslav Ryhel <clamor95@gmail.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: power: supply: Document Maxim MAX8971 charger
Date: Wed, 26 Feb 2025 11:36:59 +0200 [thread overview]
Message-ID: <20250226093700.44726-2-clamor95@gmail.com> (raw)
In-Reply-To: <20250226093700.44726-1-clamor95@gmail.com>
Add bindings for Maxim MAX8971 charger.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/power/supply/maxim,max8971.yaml | 140 ++++++++++++++++++
1 file changed, 140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
new file mode 100644
index 000000000000..91d9fec1d46a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8971.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8971 IC charger
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ The MAX8971 is a compact, high-frequency, high-efficiency switch-mode charger
+ for a one-cell lithium-ion (Li+) battery.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max8971
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ maxim,fcharge-current-limit-microamp:
+ description:
+ Fast-Charge current limit
+ minimum: 250000
+ default: 500000
+ maximum: 1550000
+
+ maxim,fcharge-timer-hours:
+ description:
+ Fast-Charge timer in hours. Setting this value 3 and lower or 11 and higher
+ will disable Fast-Charge timer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 5
+
+ maxim,fcharge-rst-threshold-high:
+ description:
+ Set Fast-Charge reset threshold to -100 mV
+ type: boolean
+
+ maxim,in-current-limit-microamp:
+ description:
+ Input current limit
+ minimum: 100000
+ default: 500000
+ maximum: 1500000
+
+ maxim,topoff-timer-minutes:
+ description:
+ Top-Off timer minutes
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 10, 20, 30, 40, 50, 60, 70]
+ default: 30
+
+ maxim,topoff-current-threshold-microamp:
+ description:
+ Top-Off current threshold
+ enum: [50000, 100000, 150000, 200000]
+ default: 50000
+
+ maxim,fcharge-usb-current-limit-microamp:
+ description:
+ Fast-Charge USB current limit
+ minimum: 100000
+ default: 500000
+ maximum: 1500000
+
+ maxim,fcharge-ac-current-limit-microamp:
+ description:
+ Fast-Charge AC current limit
+ minimum: 100000
+ default: 500000
+ maximum: 1500000
+
+ maxim,usb-in-current-limit-microamp:
+ description:
+ USB Input current limit
+ minimum: 100000
+ default: 500000
+ maximum: 1500000
+
+ maxim,ac-in-current-limit-microamp:
+ description:
+ AC Input current limit
+ minimum: 100000
+ default: 500000
+ maximum: 1500000
+
+ port:
+ description:
+ An optional port node to link the extcon device to detect type of plug.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@35 {
+ compatible = "maxim,max8971";
+ reg = <0x35>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
+
+ maxim,fcharge-ac-current-limit-microamp = <900000>;
+ maxim,fcharge-timer-hours = <0>;
+
+ maxim,fcharge-rst-threshold-high;
+ maxim,ac-in-current-limit-microamp = <1200000>;
+
+ maxim,topoff-timer-minutes = <0>;
+ maxim,topoff-current-threshold-microamp = <200000>;
+
+ port {
+ charger_input: endpoint {
+ remote-endpoint = <&extcon_output>;
+ };
+ };
+ };
+ };
+...
--
2.43.0
next prev parent reply other threads:[~2025-02-26 9:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-26 9:36 [PATCH v2 0/2] power: supply: Add support for Maxim MAX8971 charger Svyatoslav Ryhel
2025-02-26 9:36 ` Svyatoslav Ryhel [this message]
2025-02-27 10:45 ` [PATCH v2 1/2] dt-bindings: power: supply: Document " Krzysztof Kozlowski
2025-02-27 10:55 ` Svyatoslav Ryhel
2025-03-03 7:54 ` Krzysztof Kozlowski
2025-03-03 8:11 ` Svyatoslav Ryhel
2025-03-03 8:18 ` Krzysztof Kozlowski
2025-03-03 8:20 ` Svyatoslav Ryhel
2025-03-03 8:24 ` Krzysztof Kozlowski
2025-03-03 8:24 ` Krzysztof Kozlowski
2025-02-27 11:03 ` Svyatoslav Ryhel
2025-03-03 7:52 ` Krzysztof Kozlowski
2025-03-03 8:13 ` Svyatoslav Ryhel
2025-03-03 8:23 ` Krzysztof Kozlowski
2025-02-26 9:37 ` [PATCH v2 2/2] power: supply: Add support for " Svyatoslav Ryhel
2025-02-27 14:18 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250226093700.44726-2-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox