Re: [PATCH v2 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit

[Rob Herring <robh@kernel.org>]

On Fri, Feb 28, 2025 at 07:03:05PM +0000, Conor Dooley wrote:
> On Thu, Feb 27, 2025 at 01:24:39PM +0100, John Madieu wrote:
> > The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block designed
> > to measure the junction temperature. The device provides real-time temperature
> > measurements for thermal management, utilizing a single dedicated channel
> > (channel 1) for temperature sensing.
> > 
> > Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
> > ---
> > v1 -> v2:
> >  * Fix reg property specifier to get rid of yamlint warnings
> >  * Fix IRQ name to reflect TSU expectations
> > 
> >  .../thermal/renesas,r9a09g047-tsu.yaml        | 123 ++++++++++++++++++
> >  1 file changed, 123 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > new file mode 100644
> > index 000000000000..e786561ddbe3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/renesas,r9a09g047-tsu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G3E Temperature Sensor Unit (TSU)
> > +
> > +maintainers:
> > +  - John Madieu <john.madieu.xa@bp.renesas.com>
> > +
> > +description:
> > +  The Temperature Sensor Unit (TSU) is an integrated thermal sensor that
> > +  monitors the chip temperature on the Renesas RZ/G3E SoC. The TSU provides
> > +  real-time temperature measurements for thermal management.
> > +
> > +properties:
> > +  compatible:
> > +    const: renesas,r9a09g047-tsu
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    description: |
> > +      Interrupt specifiers for the TSU:
> > +      - S12TSUADI1: Conversion complete interrupt signal (pulse)
> > +      - S12TSUADCMPI1: Comparison result interrupt signal (level)
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: adi
> > +      - const: adcmpi
> > +
> > +  "#thermal-sensor-cells":
> > +    const: 0
> > +
> > +  renesas,tsu-calibration-sys:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: |
> > +      Phandle to the system controller (sys) that contains the TSU
> > +      calibration values used for temperature calculations.
> > +
> > +  renesas,tsu-operating-mode:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [0, 1]
> > +    description: |
> > +      TSU operating mode:
> > +      0: Mode 0 - Conversion started by software
> > +      1: Mode 1 - Conversion started by ELC trigger
> 
> Can you make this "software" and "elc" or something please, unless
> people will genuinely find "0" and 1" to be more informative.
> And why doesn't the property have a default?

Or just make it boolean.

Who/what decides the mode? If a user is going to want to change this, 
then it should be a runtime control, not a DT property.

Rob