From: "André Draszik" <andre.draszik@linaro.org>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Peter Griffin <peter.griffin@linaro.org>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>
Cc: "Will McVicker" <willmcvicker@google.com>,
kernel-team@android.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
devicetree@vger.kernel.org,
"André Draszik" <andre.draszik@linaro.org>
Subject: [PATCH 2/3] arm64: dts: exynos: gs101-pixel-common: add the MAX77759 PMIC
Date: Thu, 06 Mar 2025 10:14:47 +0000 [thread overview]
Message-ID: <20250306-b4-max77759-mfd-dts-v1-2-9fe8b0eb8123@linaro.org> (raw)
In-Reply-To: <20250306-b4-max77759-mfd-dts-v1-0-9fe8b0eb8123@linaro.org>
Also add the subnodes for the GPIO expander and NVMEM, and define the
NVMEM layout.
The NVMEM layout is declared such that it matches downstream's
open-coded configuration [1].
The pinctrl nodes are kept sorted by the 'samsung,pins' property rather
than node name, as I think that makes it easier to look at and to add
new nodes unambiguously in the future.
Link: https://android.googlesource.com/kernel/google-modules/bms/+/96e729a83817/max77759_maxq.c#67 [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
.../boot/dts/exynos/google/gs101-pixel-common.dtsi | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
index b25230495c64dce60916b7cd5dcb9a7cce5d0e4e..f67fa1e84d994de4d40f29a2d437ab6401ac133d 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -188,6 +188,60 @@ usbc0_role_sw: endpoint {
};
};
};
+
+ pmic@66 {
+ compatible = "maxim,max77759";
+ reg = <0x66>;
+
+ pinctrl-0 = <&if_pmic_int>;
+ pinctrl-names = "default";
+ interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio {
+ compatible = "maxim,max77759-gpio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * "Human-readable name [SIGNAL_LABEL]" where the
+ * latter comes from the schematic
+ */
+ gpio-line-names = "OTG boost [OTG_BOOST_EN]",
+ "max20339 IRQ [MW_OVP_INT_L]";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ nvmem-0 {
+ compatible = "maxim,max77759-nvmem";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reboot-mode@0 {
+ reg = <0x0 0x4>;
+ };
+
+ boot-reason@4 {
+ reg = <0x4 0x4>;
+ };
+
+ shutdown-user-flag@8 {
+ reg = <0x8 0x1>;
+ };
+
+ rsoc@a {
+ reg = <0xa 0x2>;
+ };
+ };
+ };
+ };
};
&pinctrl_far_alive {
@@ -211,6 +265,13 @@ typec_int: typec-int-pins {
samsung,pin-pud = <GS101_PIN_PULL_UP>;
samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
};
+
+ if_pmic_int: if-pmic-int-pins {
+ samsung,pins = "gpa8-3";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
};
&pinctrl_gpio_alive {
--
2.49.0.rc0.332.g42c0ae87b1-goog
next prev parent reply other threads:[~2025-03-06 10:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 10:14 [PATCH 0/3] gs101 max77759 enablement (DT) André Draszik
2025-03-06 10:14 ` [PATCH 1/3] arm64: defconfig: enable Maxim max77759 driver André Draszik
2025-03-06 10:14 ` André Draszik [this message]
2025-03-06 10:14 ` [PATCH 3/3] arm64: dts: exynos: gs101-pixel-common: add nvmem-reboot-mode André Draszik
2025-03-06 10:57 ` [PATCH 0/3] gs101 max77759 enablement (DT) André Draszik
2025-03-11 19:40 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250306-b4-max77759-mfd-dts-v1-2-9fe8b0eb8123@linaro.org \
--to=andre.draszik@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel-team@android.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=peter.griffin@linaro.org \
--cc=robh@kernel.org \
--cc=tudor.ambarus@linaro.org \
--cc=will@kernel.org \
--cc=willmcvicker@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).