From: Christian Marangi <ansuelsmth@gmail.com>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Christian Marangi <ansuelsmth@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Vladimir Oltean <olteanv@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
upstream@airoha.com
Subject: [net-next PATCH v12 11/13] nvmem: an8855: Add support for Airoha AN8855 Switch EFUSE
Date: Sun, 9 Mar 2025 18:26:56 +0100 [thread overview]
Message-ID: <20250309172717.9067-12-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20250309172717.9067-1-ansuelsmth@gmail.com>
Add support for Airoha AN8855 Switch EFUSE. These EFUSE might be used
for calibration data for the internal switch PHYs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
MAINTAINERS | 1 +
drivers/nvmem/Kconfig | 11 +++++++
drivers/nvmem/Makefile | 2 ++
drivers/nvmem/an8855-efuse.c | 63 ++++++++++++++++++++++++++++++++++++
4 files changed, 77 insertions(+)
create mode 100644 drivers/nvmem/an8855-efuse.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8c83c446a69d..938b81767862 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -732,6 +732,7 @@ F: Documentation/devicetree/bindings/net/dsa/airoha,an8855-switch.yaml
F: Documentation/devicetree/bindings/nvmem/airoha,an8855-efuse.yaml
F: drivers/mfd/airoha-an8855.c
F: drivers/net/mdio/mdio-an8855.c
+F: drivers/nvmem/an8855-efuse.c
AIROHA ETHERNET DRIVER
M: Lorenzo Bianconi <lorenzo@kernel.org>
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 8671b7c974b9..ca96c6ea685a 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -28,6 +28,17 @@ source "drivers/nvmem/layouts/Kconfig"
# Devices
+config NVMEM_AN8855_EFUSE
+ tristate "Airoha AN8855 eFuse support"
+ depends on MFD_AIROHA_AN8855 || COMPILE_TEST
+ help
+ Say y here to enable support for reading eFuses on Airoha AN8855
+ Switch. These are e.g. used to store factory programmed
+ calibration data required for the PHY.
+
+ This driver can also be built as a module. If so, the module will
+ be called nvmem-an8855-efuse.
+
config NVMEM_APPLE_EFUSES
tristate "Apple eFuse support"
depends on ARCH_APPLE || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 5b77bbb6488b..c732132c0e45 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ nvmem_layouts-y := layouts.o
obj-y += layouts/
# Devices
+obj-$(CONFIG_NVMEM_AN8855_EFUSE) += nvmem-an8855-efuse.o
+nvmem-an8855-efuse-y := an8855-efuse.o
obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
nvmem-apple-efuses-y := apple-efuses.o
obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
diff --git a/drivers/nvmem/an8855-efuse.c b/drivers/nvmem/an8855-efuse.c
new file mode 100644
index 000000000000..cd1564379098
--- /dev/null
+++ b/drivers/nvmem/an8855-efuse.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Airoha AN8855 Switch EFUSE Driver
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AN8855_EFUSE_CELL 50
+
+#define AN8855_EFUSE_DATA0 0x1000a500
+#define AN8855_EFUSE_R50O GENMASK(30, 24)
+
+static int an8855_efuse_read(void *context, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct regmap *regmap = context;
+
+ return regmap_bulk_read(regmap, AN8855_EFUSE_DATA0 + offset,
+ val, bytes / sizeof(u32));
+}
+
+static int an8855_efuse_probe(struct platform_device *pdev)
+{
+ struct nvmem_config an8855_nvmem_config = {
+ .name = "an8855-efuse",
+ .size = AN8855_EFUSE_CELL * sizeof(u32),
+ .stride = sizeof(u32),
+ .word_size = sizeof(u32),
+ .reg_read = an8855_efuse_read,
+ };
+ struct device *dev = &pdev->dev;
+ struct nvmem_device *nvmem;
+
+ /* Assign NVMEM priv to MFD regmap */
+ an8855_nvmem_config.priv = dev_get_regmap(dev->parent, "switch");
+ an8855_nvmem_config.dev = dev;
+ nvmem = devm_nvmem_register(dev, &an8855_nvmem_config);
+
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id an8855_efuse_of_match[] = {
+ { .compatible = "airoha,an8855-efuse", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, an8855_efuse_of_match);
+
+static struct platform_driver an8855_efuse_driver = {
+ .probe = an8855_efuse_probe,
+ .driver = {
+ .name = "an8855-efuse",
+ .of_match_table = an8855_efuse_of_match,
+ },
+};
+module_platform_driver(an8855_efuse_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for AN8855 Switch EFUSE");
+MODULE_LICENSE("GPL");
--
2.48.1
next prev parent reply other threads:[~2025-03-09 17:28 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-09 17:26 [net-next PATCH v12 00/13] net: dsa: Add Airoha AN8855 support Christian Marangi
2025-03-09 17:26 ` [net-next PATCH v12 01/13] dt-bindings: nvmem: Document support for Airoha AN8855 Switch EFUSE Christian Marangi
2025-03-09 17:26 ` [net-next PATCH v12 02/13] dt-bindings: net: Document support for Airoha AN8855 Switch Virtual MDIO Christian Marangi
2025-03-20 17:31 ` Simon Horman
2025-03-09 17:26 ` [net-next PATCH v12 03/13] dt-bindings: net: dsa: Document support for Airoha AN8855 DSA Switch Christian Marangi
2025-03-11 19:20 ` Rob Herring
2025-03-20 17:32 ` Simon Horman
2025-03-09 17:26 ` [net-next PATCH v12 04/13] dt-bindings: net: Document support for AN8855 Switch Internal PHY Christian Marangi
2025-03-11 19:25 ` Rob Herring
2025-03-09 17:26 ` [net-next PATCH v12 05/13] dt-bindings: mfd: Document support for Airoha AN8855 Switch SoC Christian Marangi
2025-03-09 18:50 ` Rob Herring (Arm)
2025-03-09 19:26 ` kernel test robot
2025-03-09 17:26 ` [net-next PATCH v12 06/13] net: mdio: regmap: prepare support for multiple valid addr Christian Marangi
2025-03-09 17:26 ` [net-next PATCH v12 07/13] net: mdio: regmap: add " Christian Marangi
2025-03-09 17:36 ` Russell King (Oracle)
2025-03-09 17:45 ` Christian Marangi
2025-03-14 19:41 ` Andrew Lunn
2025-03-14 21:01 ` Russell King (Oracle)
2025-03-14 21:19 ` Christian Marangi
2025-03-14 22:25 ` Russell King (Oracle)
2025-03-09 17:26 ` [net-next PATCH v12 08/13] net: mdio: regmap: add OF support Christian Marangi
2025-03-09 17:37 ` Russell King (Oracle)
2025-03-09 17:48 ` Christian Marangi
2025-03-09 17:26 ` [net-next PATCH v12 09/13] mfd: an8855: Add support for Airoha AN8855 Switch MFD Christian Marangi
2025-03-14 11:35 ` Lee Jones
2025-03-14 19:34 ` Andrew Lunn
2025-03-15 10:52 ` Christian Marangi
2025-03-14 19:16 ` Andrew Lunn
2025-03-09 17:26 ` [net-next PATCH v12 10/13] net: mdio: Add Airoha AN8855 Switch MDIO Passtrough Christian Marangi
2025-03-09 17:26 ` Christian Marangi [this message]
2025-03-09 17:26 ` [net-next PATCH v12 12/13] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver Christian Marangi
2025-03-09 17:57 ` Russell King (Oracle)
2025-03-10 10:57 ` Christian Marangi
2025-03-10 11:05 ` Russell King (Oracle)
2025-03-09 17:26 ` [net-next PATCH v12 13/13] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250309172717.9067-12-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=upstream@airoha.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).