[PATCH v10 09/10] PCI: dwc: ep: Ensure proper iteration over outbound map windows

[Frank Li <Frank.Li@nxp.com>]

Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased with commit
("PCI: dwc: ep: Add bus_addr_base for outbound window").

'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.

Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v9 to v10
- remove commit hash value

change from v8 to v9
- new patch
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 62bc71ad20719..e333855633a77 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -282,7 +282,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
 	u32 index;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	for (index = 0; index < pci->num_ob_windows; index++) {
+	for_each_set_bit(index, ep->ob_window_map, pci->num_ob_windows) {
 		if (ep->outbound_addr[index] != addr)
 			continue;
 		*atu_index = index;

-- 
2.34.1