[PATCH 00/10] drm/msm: add support for SAR2130P

[PATCH 00/10] drm/msm: add support for SAR2130P

[Dmitry Baryshkov]

Add support for the Mobile Display SubSystem (MDSS) device present on
the Qualcomm SAR2130P platform. The MDSS device is similar to SM8550, it
features two MIPI DSI controllers, two MIPI DSI PHYs and one DisplayPort
controller.

Note, due to the technical limitations DP controller wasn't completely
evaluated.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Dmitry Baryshkov (10):
      dt-bindings: display/msm: dp-controller: describe SAR2130P
      dt-bindings: display/msm: dsi-controller-main: describe SAR2130P
      dt-bindings: display/msm: dsi-phy-7nm: describe SAR2130P
      dt-bindings: display/msm: qcom,sc7280-dpu: describe SAR2130P
      dt-bindings: display/msm: Add Qualcomm SAR2130P
      drm/msm/mdss: add SAR2130P device configuration
      drm/msm/dsi/phy: add configuration for SAR2130P
      drm/msm/dpu: add catalog entry for SAR2130P
      iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
      arm64: dts: qcom: sar2130p: add display nodes

 .../bindings/display/msm/dp-controller.yaml        |   1 +
 .../bindings/display/msm/dsi-controller-main.yaml  |   2 +
 .../bindings/display/msm/dsi-phy-7nm.yaml          |   1 +
 .../bindings/display/msm/qcom,sar2130p-mdss.yaml   | 445 +++++++++++++++++++++
 .../bindings/display/msm/qcom,sc7280-dpu.yaml      |   1 +
 arch/arm64/boot/dts/qcom/sar2130p.dtsi             | 394 ++++++++++++++++++
 .../drm/msm/disp/dpu1/catalog/dpu_9_1_sar2130p.h   | 434 ++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h              |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c          |  23 ++
 drivers/gpu/drm/msm/msm_mdss.c                     |  11 +
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c         |   1 +
 15 files changed, 1319 insertions(+), 1 deletion(-)
---
base-commit: 0a2f889128969dab41861b6e40111aa03dc57014
change-id: 20250308-sar2130p-display-b0601fcfeb30
prerequisite-patch-id: bafc6ced2462f729333f18ff2c7d086a72b10744
prerequisite-patch-id: 63f7a35baf213cb869f0dbc9c06cd543b7ca3f32

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[PATCH 01/10] dt-bindings: display/msm: dp-controller: describe SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Describe DisplayPort controller present on Qualcomm SAR2130P platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index e00b88332f2fed2fc33f6d72c5cc3d827cd7594e..246bbb509bea18bed32e3a442d0926a24498c960 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -31,6 +31,7 @@ properties:
           - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sar2130p-dp
               - qcom,sm6350-dp
               - qcom,sm8150-dp
               - qcom,sm8250-dp

-- 
2.39.5

[PATCH 02/10] dt-bindings: display/msm: dsi-controller-main: describe SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Describe MIPI DSI controller present on Qualcomm SAR2130P platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 2aab33cd0017cd4a0c915b7297bb3952e62561fa..a3e05e34bf14dd5802fc538ca8b69846384f8742 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -23,6 +23,7 @@ properties:
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
@@ -314,6 +315,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm845-dsi-ctrl

-- 
2.39.5

[PATCH 03/10] dt-bindings: display/msm: dsi-phy-7nm: describe SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Describe MIPI DSI PHY present on Qualcomm SAR2130P platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 321470435e654f1d569fc54f6a810e3f70fb168c..f79be422b8892484216b407f7385789764c2de1b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -17,6 +17,7 @@ properties:
     enum:
       - qcom,dsi-phy-7nm
       - qcom,dsi-phy-7nm-8150
+      - qcom,sar2130p-dsi-phy-5nm
       - qcom,sc7280-dsi-phy-7nm
       - qcom,sm6375-dsi-phy-7nm
       - qcom,sm8350-dsi-phy-5nm

-- 
2.39.5

[PATCH 04/10] dt-bindings: display/msm: qcom,sc7280-dpu: describe SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Describe DPU controller present on Qualcomm SAR2130P platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
index 6902795b4e2c249c2b543c1c5350f739a30553f2..df9ec15ad6c3ca1f77bebaab19ffa3adb985733d 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -17,6 +17,7 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 properties:
   compatible:
     enum:
+      - qcom,sar2130p-dpu
       - qcom,sc7280-dpu
       - qcom,sc8280xp-dpu
       - qcom,sm8350-dpu

-- 
2.39.5

[PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Describe the Mobile Display SubSystem (MDSS) device present on the
Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
system level. SAR2130P features two DSI hosts and single DisplayPort
controller.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../bindings/display/msm/qcom,sar2130p-mdss.yaml   | 445 +++++++++++++++++++++
 1 file changed, 445 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..0dbf6704c44dc6a752a22e83dc7a4f8c70665390
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
@@ -0,0 +1,445 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sar2130p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SAR2130P Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <lumag@kernel.org>
+
+description:
+  SAR2310P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sar2130p-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sar2130p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sar2130p-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sar2130p-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sar2130p-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sar2130p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc_master_mdp &mc_virt_slave_ebi1>,
+                        <&gem_noc_master_appss_proc &config_noc_slave_display_cfg>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        resets = <&dispcc_disp_cc_mdss_core_bcr>;
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                 <&gcc_gcc_disp_ahb_clk>,
+                 <&gcc_gcc_disp_hf_axi_clk>,
+                 <&dispcc_disp_cc_mdss_mdp_clk>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sar2130p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_gcc_disp_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_lut_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_clk>,
+                     <&dispcc_disp_cc_mdss_vsync_clk>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&mdss_dp0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sar2130p-dp",
+                         "qcom,sm8350-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_aux_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_intf_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_pixel0_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_disp_cc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_dp_qmpphy_QMP_USB43DP_DP_LINK_CLK>,
+                                     <&usb_dp_qmpphy_QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dp0_out: endpoint {
+                        remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+                    };
+                };
+        };
+
+        dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-162000000 {
+                    opp-hz = /bits/ 64 <162000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte0_clk>,
+                     <&dispcc_disp_cc_mdss_byte0_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk0_clk>,
+                     <&dispcc_disp_cc_mdss_esc0_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte0_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte1_clk>,
+                     <&dispcc_disp_cc_mdss_byte1_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk1_clk>,
+                     <&dispcc_disp_cc_mdss_esc1_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte1_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk1_clk_src>;
+            assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae97000 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...

-- 
2.39.5

[PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add compatible and device configuration for the Qualcomm SAR2130P
platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/msm_mdss.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index dcb49fd30402b80edd2cb5971f95a78eaad6081f..3e82ba0885d03107d54eab9569bb4c5395454c7a 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -592,6 +592,16 @@ static const struct msm_mdss_data sa8775p_data = {
 	.reg_bus_bw = 74000,
 };
 
+static const struct msm_mdss_data sar2130p_data = {
+	.ubwc_enc_version = UBWC_3_0, /* 4.0.2 in hw */
+	.ubwc_dec_version = UBWC_4_3,
+	.ubwc_swizzle = 6,
+	.ubwc_static = 1,
+	.highest_bank_bit = 0,
+	.macrotile_mode = 1,
+	.reg_bus_bw = 74000,
+};
+
 static const struct msm_mdss_data sc7180_data = {
 	.ubwc_enc_version = UBWC_2_0,
 	.ubwc_dec_version = UBWC_2_0,
@@ -738,6 +748,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
 	{ .compatible = "qcom,sa8775p-mdss", .data = &sa8775p_data },
+	{ .compatible = "qcom,sar2130p-mdss", .data = &sar2130p_data },
 	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
 	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },
 	{ .compatible = "qcom,sc7180-mdss", .data = &sc7180_data },

-- 
2.39.5

[PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It
is a 5nm PHY (like SM8450), so supplies are the same, but the rest of
the configuration is the same as SM8550 DSI PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  2 ++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 23 +++++++++++++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index c0bcc68289633fd7506ce4f1f963655d862e8f08..a58bafe9fe8635730cb82e8c82ec1ded394988cd 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -581,6 +581,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_7nm_cfgs },
 	{ .compatible = "qcom,dsi-phy-7nm-8150",
 	  .data = &dsi_phy_7nm_8150_cfgs },
+	{ .compatible = "qcom,sar2130p-dsi-phy-5nm",
+	  .data = &dsi_phy_5nm_sar2130p_cfgs },
 	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
 	  .data = &dsi_phy_7nm_7280_cfgs },
 	{ .compatible = "qcom,sm6375-dsi-phy-7nm",
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 1925418d9999a24263d6621299cae78f1fb9455c..1ed08b56e056094bc0096d07d4470b89d9824060 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8650_cfgs;
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index a92decbee5b5433853ed973747f7705d9079068d..cad55702746b8d35949d22090796cca60f03b9e1 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -1289,6 +1289,29 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
 	.quirks = DSI_PHY_7NM_QUIRK_V4_3,
 };
 
+const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_7nm_97800uA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_97800uA_regulators),
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
+	},
+	.min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+	.max_pll_rate = 5000000000UL,
+#else
+	.max_pll_rate = ULONG_MAX,
+#endif
+	.io_start = { 0xae95000, 0xae97000 },
+	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};
+
 const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
 	.has_phy_lane = true,
 	.regulator_data = dsi_phy_7nm_98400uA_regulators,

-- 
2.39.5

[PATCH 08/10] drm/msm/dpu: add catalog entry for SAR2130P

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add DPU driver support for the Qualcomm SAR2130P platform. It is mostly
the same as SM8550, minor differences in the CDP configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../drm/msm/disp/dpu1/catalog/dpu_9_1_sar2130p.h   | 434 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 4 files changed, 437 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_1_sar2130p.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_1_sar2130p.h
new file mode 100644
index 0000000000000000000000000000000000000000..22dd16c6e210e9520ecb7a851bee402032fa1ee2
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_1_sar2130p.h
@@ -0,0 +1,434 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DPU_9_1_SAR2130P_H
+#define _DPU_9_1_SAR2130P_H
+
+static const struct dpu_caps sar2130p_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = true,
+	.max_linewidth = 5120,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_mdp_cfg sar2130p_mdp = {
+	.name = "top_0",
+	.base = 0, .len = 0x494,
+	.features = BIT(DPU_MDP_PERIPH_0_REMOVED),
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+	},
+};
+
+/* FIXME: get rid of DPU_CTL_SPLIT_DISPLAY in favour of proper ACTIVE_CTL support */
+static const struct dpu_ctl_cfg sar2130p_ctl[] = {
+	{
+		.name = "ctl_0", .id = CTL_0,
+		.base = 0x15000, .len = 0x290,
+		.features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	}, {
+		.name = "ctl_1", .id = CTL_1,
+		.base = 0x16000, .len = 0x290,
+		.features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	}, {
+		.name = "ctl_2", .id = CTL_2,
+		.base = 0x17000, .len = 0x290,
+		.features = CTL_SM8550_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	}, {
+		.name = "ctl_3", .id = CTL_3,
+		.base = 0x18000, .len = 0x290,
+		.features = CTL_SM8550_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	}, {
+		.name = "ctl_4", .id = CTL_4,
+		.base = 0x19000, .len = 0x290,
+		.features = CTL_SM8550_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	}, {
+		.name = "ctl_5", .id = CTL_5,
+		.base = 0x1a000, .len = 0x290,
+		.features = CTL_SM8550_MASK,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	},
+};
+
+static const struct dpu_sspp_cfg sar2130p_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_2,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_2,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_2", .id = SSPP_VIG2,
+		.base = 0x8000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_2,
+		.xin_id = 8,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_3", .id = SSPP_VIG3,
+		.base = 0xa000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_2,
+		.xin_id = 12,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_11", .id = SSPP_DMA3,
+		.base = 0x2a000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 13,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_12", .id = SSPP_DMA4,
+		.base = 0x2c000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 14,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_13", .id = SSPP_DMA5,
+		.base = 0x2e000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 15,
+		.type = SSPP_TYPE_DMA,
+	},
+};
+
+static const struct dpu_lm_cfg sar2130p_lm[] = {
+	{
+		.name = "lm_0", .id = LM_0,
+		.base = 0x44000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_1,
+		.pingpong = PINGPONG_0,
+		.dspp = DSPP_0,
+	}, {
+		.name = "lm_1", .id = LM_1,
+		.base = 0x45000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_0,
+		.pingpong = PINGPONG_1,
+		.dspp = DSPP_1,
+	}, {
+		.name = "lm_2", .id = LM_2,
+		.base = 0x46000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_3,
+		.pingpong = PINGPONG_2,
+		.dspp = DSPP_2,
+	}, {
+		.name = "lm_3", .id = LM_3,
+		.base = 0x47000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_2,
+		.pingpong = PINGPONG_3,
+		.dspp = DSPP_3,
+	}, {
+		.name = "lm_4", .id = LM_4,
+		.base = 0x48000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_5,
+		.pingpong = PINGPONG_4,
+	}, {
+		.name = "lm_5", .id = LM_5,
+		.base = 0x49000, .len = 0x320,
+		.features = MIXER_SDM845_MASK,
+		.sblk = &sdm845_lm_sblk,
+		.lm_pair = LM_4,
+		.pingpong = PINGPONG_5,
+	},
+};
+
+static const struct dpu_dspp_cfg sar2130p_dspp[] = {
+	{
+		.name = "dspp_0", .id = DSPP_0,
+		.base = 0x54000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_1", .id = DSPP_1,
+		.base = 0x56000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_2", .id = DSPP_2,
+		.base = 0x58000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	}, {
+		.name = "dspp_3", .id = DSPP_3,
+		.base = 0x5a000, .len = 0x1800,
+		.features = DSPP_SC7180_MASK,
+		.sblk = &sdm845_dspp_sblk,
+	},
+};
+static const struct dpu_pingpong_cfg sar2130p_pp[] = {
+	{
+		.name = "pingpong_0", .id = PINGPONG_0,
+		.base = 0x69000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+	}, {
+		.name = "pingpong_1", .id = PINGPONG_1,
+		.base = 0x6a000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+	}, {
+		.name = "pingpong_2", .id = PINGPONG_2,
+		.base = 0x6b000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+	}, {
+		.name = "pingpong_3", .id = PINGPONG_3,
+		.base = 0x6c000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+	}, {
+		.name = "pingpong_4", .id = PINGPONG_4,
+		.base = 0x6d000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+	}, {
+		.name = "pingpong_5", .id = PINGPONG_5,
+		.base = 0x6e000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+	}, {
+		.name = "pingpong_cwb_0", .id = PINGPONG_CWB_0,
+		.base = 0x66000, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+	}, {
+		.name = "pingpong_cwb_1", .id = PINGPONG_CWB_1,
+		.base = 0x66400, .len = 0,
+		.features = BIT(DPU_PINGPONG_DITHER),
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+	},
+};
+
+static const struct dpu_merge_3d_cfg sar2130p_merge_3d[] = {
+	{
+		.name = "merge_3d_0", .id = MERGE_3D_0,
+		.base = 0x4e000, .len = 0x8,
+	}, {
+		.name = "merge_3d_1", .id = MERGE_3D_1,
+		.base = 0x4f000, .len = 0x8,
+	}, {
+		.name = "merge_3d_2", .id = MERGE_3D_2,
+		.base = 0x50000, .len = 0x8,
+	}, {
+		.name = "merge_3d_3", .id = MERGE_3D_3,
+		.base = 0x66700, .len = 0x8,
+	},
+};
+
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg sar2130p_dsc[] = {
+	{
+		.name = "dce_0_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_0,
+	}, {
+		.name = "dce_0_1", .id = DSC_1,
+		.base = 0x80000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2),
+		.sblk = &dsc_sblk_1,
+	}, {
+		.name = "dce_1_0", .id = DSC_2,
+		.base = 0x81000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &dsc_sblk_0,
+	}, {
+		.name = "dce_1_1", .id = DSC_3,
+		.base = 0x81000, .len = 0x4,
+		.features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &dsc_sblk_1,
+	},
+};
+
+static const struct dpu_wb_cfg sar2130p_wb[] = {
+	{
+		.name = "wb_2", .id = WB_2,
+		.base = 0x65000, .len = 0x2c8,
+		.features = WB_SM8250_MASK,
+		.format_list = wb2_formats_rgb_yuv,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv),
+		.xin_id = 6,
+		.vbif_idx = VBIF_RT,
+		.maxlinewidth = 4096,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+	},
+};
+
+static const struct dpu_intf_cfg sar2130p_intf[] = {
+	{
+		.name = "intf_0", .id = INTF_0,
+		.base = 0x34000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+	}, {
+		.name = "intf_1", .id = INTF_1,
+		.base = 0x35000, .len = 0x300,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+	}, {
+		.name = "intf_2", .id = INTF_2,
+		.base = 0x36000, .len = 0x300,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
+	}, {
+		.name = "intf_3", .id = INTF_3,
+		.base = 0x37000, .len = 0x280,
+		.features = INTF_SC7280_MASK,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+	},
+};
+
+static const struct dpu_perf_cfg sar2130p_perf_data = {
+	.max_bw_low = 13600000,
+	.max_bw_high = 18200000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 800000,
+	.min_prefill_lines = 35,
+	/* FIXME: lut tables */
+	.danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+	.safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
+		.entries = sc7180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+		.entries = sc7180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 0, .wr_enable = 0},
+		{.rd_enable = 0, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version sar2130p_mdss_ver = {
+	.core_major_ver = 9,
+	.core_minor_ver = 1,
+};
+
+const struct dpu_mdss_cfg dpu_sar2130p_cfg = {
+	.mdss_ver = &sar2130p_mdss_ver,
+	.caps = &sar2130p_dpu_caps,
+	.mdp = &sar2130p_mdp,
+	.cdm = &dpu_cdm_5_x,
+	.ctl_count = ARRAY_SIZE(sar2130p_ctl),
+	.ctl = sar2130p_ctl,
+	.sspp_count = ARRAY_SIZE(sar2130p_sspp),
+	.sspp = sar2130p_sspp,
+	.mixer_count = ARRAY_SIZE(sar2130p_lm),
+	.mixer = sar2130p_lm,
+	.dspp_count = ARRAY_SIZE(sar2130p_dspp),
+	.dspp = sar2130p_dspp,
+	.pingpong_count = ARRAY_SIZE(sar2130p_pp),
+	.pingpong = sar2130p_pp,
+	.dsc_count = ARRAY_SIZE(sar2130p_dsc),
+	.dsc = sar2130p_dsc,
+	.merge_3d_count = ARRAY_SIZE(sar2130p_merge_3d),
+	.merge_3d = sar2130p_merge_3d,
+	.wb_count = ARRAY_SIZE(sar2130p_wb),
+	.wb = sar2130p_wb,
+	.intf_count = ARRAY_SIZE(sar2130p_intf),
+	.intf = sar2130p_intf,
+	.vbif_count = ARRAY_SIZE(sm8550_vbif),
+	.vbif = sm8550_vbif,
+	.perf = &sar2130p_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 64265ca4656a04d8c5a1d9582d7124c7eb897099..ce8d88e1d8b8bc6dea893f13a0449315ac8d2841 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -759,7 +759,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 #include "catalog/dpu_8_4_sa8775p.h"
 
 #include "catalog/dpu_9_0_sm8550.h"
-
+#include "catalog/dpu_9_1_sar2130p.h"
 #include "catalog/dpu_9_2_x1e80100.h"
 
 #include "catalog/dpu_10_0_sm8650.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 4cea19e1a20380c56ae014f2d33a6884a72e0ca0..e9b627e02c8996c8fb611e8e333a35e7ce9b8373 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -841,6 +841,7 @@ extern const struct dpu_mdss_cfg dpu_msm8937_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8953_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8996_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
+extern const struct dpu_mdss_cfg dpu_sar2130p_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm630_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm660_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm845_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 3305ad0623ca41882db0172e65a9beb7ebe00b6c..1fd82b6747e9058ce11dc2620729921492d5ebdd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1512,6 +1512,7 @@ static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
 	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
 	{ .compatible = "qcom,sa8775p-dpu", .data = &dpu_sa8775p_cfg, },
+	{ .compatible = "qcom,sar2130p-dpu", .data = &dpu_sar2130p_cfg, },
 	{ .compatible = "qcom,sdm630-mdp5", .data = &dpu_sdm630_cfg, },
 	{ .compatible = "qcom,sdm660-mdp5", .data = &dpu_sdm660_cfg, },
 	{ .compatible = "qcom,sdm670-dpu", .data = &dpu_sdm670_cfg, },

-- 
2.39.5

[PATCH 09/10] iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add the SAR2130P compatible to clients compatible list, the device
require identity domain.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 59d02687280e8d37b5e944619fcfe4ebd1bd6926..ecc4a1bc9477b766f317a58ef8b5dbcfe448afa9 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -356,6 +356,7 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
 	{ .compatible = "qcom,mdp4" },
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,qcm2290-mdss" },
+	{ .compatible = "qcom,sar2130p-mdss" },
 	{ .compatible = "qcom,sc7180-mdss" },
 	{ .compatible = "qcom,sc7180-mss-pil" },
 	{ .compatible = "qcom,sc7280-mdss" },

-- 
2.39.5

[PATCH 10/10] arm64: dts: qcom: sar2130p: add display nodes

[Dmitry Baryshkov]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add display controller, two DSI hosts, two DSI PHYs and a single DP
controller. Link DP to the QMP Combo PHY.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 394 +++++++++++++++++++++++++++++++++
 1 file changed, 394 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index dd832e6816be85817fd1ecc853f8d4c800826bc4..4e1816fcda8168e98e27b8bc0f8b5150c03276d2 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sar2130p-gcc.h>
 #include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
@@ -1854,6 +1855,7 @@ port@2 {
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -1951,6 +1953,398 @@ usb_1_dwc3_ss: endpoint {
 			};
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sar2130p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
+
+			iommus = <&apps_smmu 0x2000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sar2130p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sar2130p-dp",
+					     "qcom,sm8350-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0xc00>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae95000 0x0 0x200>,
+				      <0x0 0x0ae95200 0x0 0x280>,
+				      <0x0 0x0ae95500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae97000 0x0 0x200>,
+				      <0x0 0x0ae97200 0x0 0x280>,
+				      <0x0 0x0ae97500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sar2130p-dispcc";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sar2130p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;

-- 
2.39.5

Re: [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration

[Dmitry Baryshkov]

On Sat, Mar 08, 2025 at 03:42:24AM +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Add compatible and device configuration for the Qualcomm SAR2130P
> platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/gpu/drm/msm/msm_mdss.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> index dcb49fd30402b80edd2cb5971f95a78eaad6081f..3e82ba0885d03107d54eab9569bb4c5395454c7a 100644
> --- a/drivers/gpu/drm/msm/msm_mdss.c
> +++ b/drivers/gpu/drm/msm/msm_mdss.c
> @@ -592,6 +592,16 @@ static const struct msm_mdss_data sa8775p_data = {
>  	.reg_bus_bw = 74000,
>  };
>  
> +static const struct msm_mdss_data sar2130p_data = {
> +	.ubwc_enc_version = UBWC_3_0, /* 4.0.2 in hw */
> +	.ubwc_dec_version = UBWC_4_3,
> +	.ubwc_swizzle = 6,
> +	.ubwc_static = 1,

This should have been .ubwc_bank_spread = true.
I have been rebasing the series from the earlier kernel and I'm not sure
why this didn't show up during the build phase.

> +	.highest_bank_bit = 0,
> +	.macrotile_mode = 1,
> +	.reg_bus_bw = 74000,
> +};
> +
>  static const struct msm_mdss_data sc7180_data = {
>  	.ubwc_enc_version = UBWC_2_0,
>  	.ubwc_dec_version = UBWC_2_0,
> @@ -738,6 +748,7 @@ static const struct of_device_id mdss_dt_match[] = {
>  	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
>  	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
>  	{ .compatible = "qcom,sa8775p-mdss", .data = &sa8775p_data },
> +	{ .compatible = "qcom,sar2130p-mdss", .data = &sar2130p_data },
>  	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
>  	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },
>  	{ .compatible = "qcom,sc7180-mdss", .data = &sc7180_data },
> 
> -- 
> 2.39.5
> 

-- 
With best wishes
Dmitry

Re: [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P

[Rob Herring (Arm)]

On Sat, 08 Mar 2025 03:42:23 +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Describe the Mobile Display SubSystem (MDSS) device present on the
> Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
> system level. SAR2130P features two DSI hosts and single DisplayPort
> controller.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../bindings/display/msm/qcom,sar2130p-mdss.yaml   | 445 +++++++++++++++++++++
>  1 file changed, 445 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,sar2130p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8226-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8976-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm670-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm6125-dsi-ctrl', 'qcom,sm6150-dsi-ctrl', 'qcom,sm6350-dsi-ctrl', 'qcom,sm6375-dsi-ctrl', 'qcom,sm7150-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl', 'qcom,sm8650-dsi-ctrl']
	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae94000: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae96000: compatible: 'oneOf' conditional failed, one must be fixed:
	['qcom,sar2130p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8226-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8976-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm670-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm6125-dsi-ctrl', 'qcom,sm6150-dsi-ctrl', 'qcom,sm6350-dsi-ctrl', 'qcom,sm6375-dsi-ctrl', 'qcom,sm7150-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl', 'qcom,sm8650-dsi-ctrl']
	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae96000: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250308-sar2130p-display-v1-5-1d4c30f43822@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P

[Dmitry Baryshkov]

On Fri, Mar 07, 2025 at 09:40:56PM -0600, Rob Herring (Arm) wrote:
> 
> On Sat, 08 Mar 2025 03:42:23 +0200, Dmitry Baryshkov wrote:
> > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > 
> > Describe the Mobile Display SubSystem (MDSS) device present on the
> > Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
> > system level. SAR2130P features two DSI hosts and single DisplayPort
> > controller.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >  .../bindings/display/msm/qcom,sar2130p-mdss.yaml   | 445 +++++++++++++++++++++
> >  1 file changed, 445 insertions(+)
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed:
> 	['qcom,sar2130p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
> 	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8226-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8976-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm670-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm6125-dsi-ctrl', 'qcom,sm6150-dsi-ctrl', 'qcom,sm6350-dsi-ctrl', 'qcom,sm6375-dsi-ctrl', 'qcom,sm7150-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl', 'qcom,sm8650-dsi-ctrl']
> 	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
> 	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#

It looks like the patch 2 could not be applied and was skipped. Is the
bot parsing the dependencies from the cover letter?

> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae94000: Unevaluated properties are not allowed ('compatible' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae96000: compatible: 'oneOf' conditional failed, one must be fixed:
> 	['qcom,sar2130p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
> 	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8226-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8976-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm670-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm6125-dsi-ctrl', 'qcom,sm6150-dsi-ctrl', 'qcom,sm6350-dsi-ctrl', 'qcom,sm6375-dsi-ctrl', 'qcom,sm7150-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl', 'qcom,sm8650-dsi-ctrl']
> 	'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
> 	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae96000: Unevaluated properties are not allowed ('compatible' was unexpected)
> 	from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250308-sar2130p-display-v1-5-1d4c30f43822@linaro.org
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

-- 
With best wishes
Dmitry

Re: [PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P

[Konrad Dybcio]

On 8.03.2025 2:42 AM, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It
> is a 5nm PHY (like SM8450), so supplies are the same, but the rest of
> the configuration is the same as SM8550 DSI PHY.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  2 ++
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 23 +++++++++++++++++++++++
>  3 files changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> index c0bcc68289633fd7506ce4f1f963655d862e8f08..a58bafe9fe8635730cb82e8c82ec1ded394988cd 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> @@ -581,6 +581,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
>  	  .data = &dsi_phy_7nm_cfgs },
>  	{ .compatible = "qcom,dsi-phy-7nm-8150",
>  	  .data = &dsi_phy_7nm_8150_cfgs },
> +	{ .compatible = "qcom,sar2130p-dsi-phy-5nm",
> +	  .data = &dsi_phy_5nm_sar2130p_cfgs },
>  	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
>  	  .data = &dsi_phy_7nm_7280_cfgs },
>  	{ .compatible = "qcom,sm6375-dsi-phy-7nm",
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> index 1925418d9999a24263d6621299cae78f1fb9455c..1ed08b56e056094bc0096d07d4470b89d9824060 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> @@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
>  extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
>  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
>  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
> +extern const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs;
>  extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
>  extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8650_cfgs;
>  
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index a92decbee5b5433853ed973747f7705d9079068d..cad55702746b8d35949d22090796cca60f03b9e1 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -1289,6 +1289,29 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
>  	.quirks = DSI_PHY_7NM_QUIRK_V4_3,
>  };
>  
> +const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs = {
> +	.has_phy_lane = true,
> +	.regulator_data = dsi_phy_7nm_97800uA_regulators,
> +	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_97800uA_regulators),
> +	.ops = {
> +		.enable = dsi_7nm_phy_enable,
> +		.disable = dsi_7nm_phy_disable,
> +		.pll_init = dsi_pll_7nm_init,
> +		.save_pll_state = dsi_7nm_pll_save_state,
> +		.restore_pll_state = dsi_7nm_pll_restore_state,
> +		.set_continuous_clock = dsi_7nm_set_continuous_clock,
> +	},
> +	.min_pll_rate = 600000000UL,
> +#ifdef CONFIG_64BIT
> +	.max_pll_rate = 5000000000UL,
> +#else
> +	.max_pll_rate = ULONG_MAX,
> +#endif
> +	.io_start = { 0xae95000, 0xae97000 },
> +	.num_dsi_phy = 2,
> +	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
> +};

I'm squinting very very hard and can't tell how this is different from
dsi_phy_4nm_8550_cfgs

Konrad

Re: [PATCH 07/10] drm/msm/dsi/phy: add configuration for SAR2130P

[Dmitry Baryshkov]

On Sat, Mar 08, 2025 at 03:17:23PM +0100, Konrad Dybcio wrote:
> On 8.03.2025 2:42 AM, Dmitry Baryshkov wrote:
> > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > 
> > Qualcomm SAR2130P requires slightly different setup for the DSI PHY. It
> > is a 5nm PHY (like SM8450), so supplies are the same, but the rest of
> > the configuration is the same as SM8550 DSI PHY.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  2 ++
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 23 +++++++++++++++++++++++
> >  3 files changed, 26 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > index c0bcc68289633fd7506ce4f1f963655d862e8f08..a58bafe9fe8635730cb82e8c82ec1ded394988cd 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > @@ -581,6 +581,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
> >  	  .data = &dsi_phy_7nm_cfgs },
> >  	{ .compatible = "qcom,dsi-phy-7nm-8150",
> >  	  .data = &dsi_phy_7nm_8150_cfgs },
> > +	{ .compatible = "qcom,sar2130p-dsi-phy-5nm",
> > +	  .data = &dsi_phy_5nm_sar2130p_cfgs },
> >  	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
> >  	  .data = &dsi_phy_7nm_7280_cfgs },
> >  	{ .compatible = "qcom,sm6375-dsi-phy-7nm",
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > index 1925418d9999a24263d6621299cae78f1fb9455c..1ed08b56e056094bc0096d07d4470b89d9824060 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > @@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
> > +extern const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8650_cfgs;
> >  
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > index a92decbee5b5433853ed973747f7705d9079068d..cad55702746b8d35949d22090796cca60f03b9e1 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > @@ -1289,6 +1289,29 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
> >  	.quirks = DSI_PHY_7NM_QUIRK_V4_3,
> >  };
> >  
> > +const struct msm_dsi_phy_cfg dsi_phy_5nm_sar2130p_cfgs = {
> > +	.has_phy_lane = true,
> > +	.regulator_data = dsi_phy_7nm_97800uA_regulators,
> > +	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_97800uA_regulators),
> > +	.ops = {
> > +		.enable = dsi_7nm_phy_enable,
> > +		.disable = dsi_7nm_phy_disable,
> > +		.pll_init = dsi_pll_7nm_init,
> > +		.save_pll_state = dsi_7nm_pll_save_state,
> > +		.restore_pll_state = dsi_7nm_pll_restore_state,
> > +		.set_continuous_clock = dsi_7nm_set_continuous_clock,
> > +	},
> > +	.min_pll_rate = 600000000UL,
> > +#ifdef CONFIG_64BIT
> > +	.max_pll_rate = 5000000000UL,
> > +#else
> > +	.max_pll_rate = ULONG_MAX,
> > +#endif
> > +	.io_start = { 0xae95000, 0xae97000 },
> > +	.num_dsi_phy = 2,
> > +	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
> > +};
> 
> I'm squinting very very hard and can't tell how this is different from
> dsi_phy_4nm_8550_cfgs

97800 uA vs 98400 uA is the only difference AFAIK.

-- 
With best wishes
Dmitry

Re: [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration

[kernel test robot]

Hi Dmitry,

kernel test robot noticed the following build errors:

[auto build test ERROR on 0a2f889128969dab41861b6e40111aa03dc57014]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/dt-bindings-display-msm-dp-controller-describe-SAR2130P/20250308-094544
base:   0a2f889128969dab41861b6e40111aa03dc57014
patch link:    https://lore.kernel.org/r/20250308-sar2130p-display-v1-6-1d4c30f43822%40linaro.org
patch subject: [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration
config: arm64-randconfig-001-20250309 (https://download.01.org/0day-ci/archive/20250309/202503091011.Kwbj8DQz-lkp@intel.com/config)
compiler: clang version 15.0.7 (https://github.com/llvm/llvm-project 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250309/202503091011.Kwbj8DQz-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202503091011.Kwbj8DQz-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/gpu/drm/msm/msm_mdss.c:599:3: error: field designator 'ubwc_static' does not refer to any field in type 'const struct msm_mdss_data'
           .ubwc_static = 1,
            ^
   1 error generated.


vim +599 drivers/gpu/drm/msm/msm_mdss.c

   594	
   595	static const struct msm_mdss_data sar2130p_data = {
   596		.ubwc_enc_version = UBWC_3_0, /* 4.0.2 in hw */
   597		.ubwc_dec_version = UBWC_4_3,
   598		.ubwc_swizzle = 6,
 > 599		.ubwc_static = 1,
   600		.highest_bank_bit = 0,
   601		.macrotile_mode = 1,
   602		.reg_bus_bw = 74000,
   603	};
   604	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration

[kernel test robot]

Hi Dmitry,

kernel test robot noticed the following build errors:

[auto build test ERROR on 0a2f889128969dab41861b6e40111aa03dc57014]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/dt-bindings-display-msm-dp-controller-describe-SAR2130P/20250308-094544
base:   0a2f889128969dab41861b6e40111aa03dc57014
patch link:    https://lore.kernel.org/r/20250308-sar2130p-display-v1-6-1d4c30f43822%40linaro.org
patch subject: [PATCH 06/10] drm/msm/mdss: add SAR2130P device configuration
config: arm-randconfig-004-20250309 (https://download.01.org/0day-ci/archive/20250309/202503091045.4UVScL8t-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 14.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250309/202503091045.4UVScL8t-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202503091045.4UVScL8t-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/gpu/drm/msm/msm_mdss.c:599:10: error: 'const struct msm_mdss_data' has no member named 'ubwc_static'
     599 |         .ubwc_static = 1,
         |          ^~~~~~~~~~~
   drivers/gpu/drm/msm/msm_mdss.c:600:29: warning: initialized field overwritten [-Woverride-init]
     600 |         .highest_bank_bit = 0,
         |                             ^
   drivers/gpu/drm/msm/msm_mdss.c:600:29: note: (near initialization for 'sar2130p_data.highest_bank_bit')


vim +599 drivers/gpu/drm/msm/msm_mdss.c

   594	
   595	static const struct msm_mdss_data sar2130p_data = {
   596		.ubwc_enc_version = UBWC_3_0, /* 4.0.2 in hw */
   597		.ubwc_dec_version = UBWC_4_3,
   598		.ubwc_swizzle = 6,
 > 599		.ubwc_static = 1,
   600		.highest_bank_bit = 0,
   601		.macrotile_mode = 1,
   602		.reg_bus_bw = 74000,
   603	};
   604	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH 01/10] dt-bindings: display/msm: dp-controller: describe SAR2130P

[Krzysztof Kozlowski]

On Sat, Mar 08, 2025 at 03:42:19AM +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Describe DisplayPort controller present on Qualcomm SAR2130P platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 02/10] dt-bindings: display/msm: dsi-controller-main: describe SAR2130P

[Krzysztof Kozlowski]

On Sat, Mar 08, 2025 at 03:42:20AM +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Describe MIPI DSI controller present on Qualcomm SAR2130P platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 03/10] dt-bindings: display/msm: dsi-phy-7nm: describe SAR2130P

[Krzysztof Kozlowski]

On Sat, Mar 08, 2025 at 03:42:21AM +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Describe MIPI DSI PHY present on Qualcomm SAR2130P platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 04/10] dt-bindings: display/msm: qcom,sc7280-dpu: describe SAR2130P

[Krzysztof Kozlowski]

On Sat, Mar 08, 2025 at 03:42:22AM +0200, Dmitry Baryshkov wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Describe DPU controller present on Qualcomm SAR2130P platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P

[Krzysztof Kozlowski]

On Sat, Mar 08, 2025 at 03:42:23AM +0200, Dmitry Baryshkov wrote:
> +patternProperties:
> +  "^display-controller@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +

Drop blank line

> +    properties:
> +      compatible:
> +        const: qcom,sar2130p-dpu
> +
> +  "^displayport-controller@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +

Drop blank line

> +    properties:
> +      compatible:
> +        items:
> +          - const: qcom,sar2130p-dp
> +          - const: qcom,sm8350-dp
> +
> +  "^dsi@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +

Drop blank line

> +    properties:
> +      compatible:
> +        items:
> +          - const: qcom,sar2130p-dsi-ctrl
> +          - const: qcom,mdss-dsi-ctrl

Drop last compatible here and use contains (see v3 of my sm8750)

> +
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: true
> +

Drop blank line

> +    properties:
> +      compatible:
> +        const: qcom,sar2130p-dsi-phy-5nm
> +
> +required:
> +  - compatible

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 05/10] dt-bindings: display/msm: Add Qualcomm SAR2130P

[Rob Herring]

On Fri, Mar 7, 2025 at 11:09 PM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Fri, Mar 07, 2025 at 09:40:56PM -0600, Rob Herring (Arm) wrote:
> >
> > On Sat, 08 Mar 2025 03:42:23 +0200, Dmitry Baryshkov wrote:
> > > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > >
> > > Describe the Mobile Display SubSystem (MDSS) device present on the
> > > Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
> > > system level. SAR2130P features two DSI hosts and single DisplayPort
> > > controller.
> > >
> > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > ---
> > >  .../bindings/display/msm/qcom,sar2130p-mdss.yaml   | 445 +++++++++++++++++++++
> > >  1 file changed, 445 insertions(+)
> > >
> >
> > My bot found errors running 'make dt_binding_check' on your patch:
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.example.dtb: dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed:
> >       ['qcom,sar2130p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
> >       'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8226-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8976-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm670-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm6125-dsi-ctrl', 'qcom,sm6150-dsi-ctrl', 'qcom,sm6350-dsi-ctrl', 'qcom,sm6375-dsi-ctrl', 'qcom,sm7150-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl', 'qcom,sm8650-dsi-ctrl']
> >       'qcom,sar2130p-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
> >       from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
>
> It looks like the patch 2 could not be applied and was skipped. Is the
> bot parsing the dependencies from the cover letter?

No, it's not that smart. I need to move it to using b4 though that has
its own quirks when no dependencies are given.

Rob

Re: (subset) [PATCH 00/10] drm/msm: add support for SAR2130P

[Bjorn Andersson]

On Sat, 08 Mar 2025 03:42:18 +0200, Dmitry Baryshkov wrote:
> Add support for the Mobile Display SubSystem (MDSS) device present on
> the Qualcomm SAR2130P platform. The MDSS device is similar to SM8550, it
> features two MIPI DSI controllers, two MIPI DSI PHYs and one DisplayPort
> controller.
> 
> Note, due to the technical limitations DP controller wasn't completely
> evaluated.
> 
> [...]

Applied, thanks!

[10/10] arm64: dts: qcom: sar2130p: add display nodes
        commit: 541d0b2f4dcd9514265b3a3f7f797525caabc1db

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>