From: Dimitri Fedrau via B4 Relay <devnull+dimitri.fedrau.liebherr.com@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-can@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Dimitri Fedrau <dimitri.fedrau@liebherr.com>,
Dimitri Fedrau <dima.fedrau@gmail.com>
Subject: [PATCH RESEND v4 2/2] can: flexcan: add transceiver capabilities
Date: Wed, 12 Mar 2025 18:45:23 +0100 [thread overview]
Message-ID: <20250312-flexcan-add-transceiver-caps-v4-2-29e89ae0225a@liebherr.com> (raw)
In-Reply-To: <20250312-flexcan-add-transceiver-caps-v4-0-29e89ae0225a@liebherr.com>
From: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY. Add
the capability to ensure that the PHY is in operational state when the link
is set to an "up" state.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
---
drivers/net/can/flexcan/flexcan-core.c | 27 +++++++++++++++++++++------
drivers/net/can/flexcan/flexcan.h | 1 +
2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index b347a1c93536d54efaa5f7d3347bd47c20860b3e..7588cb54a909af065522ddbcb06cc3acb9669893 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -26,6 +26,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/can/platform/flexcan.h>
+#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
@@ -644,18 +645,22 @@ static void flexcan_clks_disable(const struct flexcan_priv *priv)
static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv)
{
- if (!priv->reg_xceiver)
- return 0;
+ if (priv->reg_xceiver)
+ return regulator_enable(priv->reg_xceiver);
+ else if (priv->transceiver)
+ return phy_power_on(priv->transceiver);
- return regulator_enable(priv->reg_xceiver);
+ return 0;
}
static inline int flexcan_transceiver_disable(const struct flexcan_priv *priv)
{
- if (!priv->reg_xceiver)
- return 0;
+ if (priv->reg_xceiver)
+ return regulator_disable(priv->reg_xceiver);
+ else if (priv->transceiver)
+ return phy_power_off(priv->transceiver);
- return regulator_disable(priv->reg_xceiver);
+ return 0;
}
static int flexcan_chip_enable(struct flexcan_priv *priv)
@@ -2086,6 +2091,7 @@ static int flexcan_probe(struct platform_device *pdev)
struct net_device *dev;
struct flexcan_priv *priv;
struct regulator *reg_xceiver;
+ struct phy *transceiver;
struct clk *clk_ipg = NULL, *clk_per = NULL;
struct flexcan_regs __iomem *regs;
struct flexcan_platform_data *pdata;
@@ -2101,6 +2107,11 @@ static int flexcan_probe(struct platform_device *pdev)
else if (IS_ERR(reg_xceiver))
return PTR_ERR(reg_xceiver);
+ transceiver = devm_phy_optional_get(&pdev->dev, NULL);
+ if (IS_ERR(transceiver))
+ return dev_err_probe(&pdev->dev, PTR_ERR(transceiver),
+ "failed to get phy\n");
+
if (pdev->dev.of_node) {
of_property_read_u32(pdev->dev.of_node,
"clock-frequency", &clock_freq);
@@ -2198,6 +2209,10 @@ static int flexcan_probe(struct platform_device *pdev)
priv->clk_per = clk_per;
priv->clk_src = clk_src;
priv->reg_xceiver = reg_xceiver;
+ priv->transceiver = transceiver;
+
+ if (transceiver)
+ priv->can.bitrate_max = transceiver->attrs.max_link_rate;
if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
priv->irq_boff = platform_get_irq(pdev, 1);
diff --git a/drivers/net/can/flexcan/flexcan.h b/drivers/net/can/flexcan/flexcan.h
index 2cf886618c9621166173b865f266830b3f6c1fb0..16692a2502eba26575eeeec83dfffdf35f07b034 100644
--- a/drivers/net/can/flexcan/flexcan.h
+++ b/drivers/net/can/flexcan/flexcan.h
@@ -107,6 +107,7 @@ struct flexcan_priv {
struct clk *clk_per;
struct flexcan_devtype_data devtype_data;
struct regulator *reg_xceiver;
+ struct phy *transceiver;
struct flexcan_stop_mode stm;
int irq_boff;
--
2.39.5
next prev parent reply other threads:[~2025-03-12 17:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-12 17:45 [PATCH RESEND v4 0/2] can: flexcan: add transceiver capabilities Dimitri Fedrau via B4 Relay
2025-03-12 17:45 ` [PATCH RESEND v4 1/2] dt-bindings: can: fsl,flexcan: " Dimitri Fedrau via B4 Relay
2025-03-12 17:45 ` Dimitri Fedrau via B4 Relay [this message]
2025-03-14 8:44 ` [PATCH RESEND v4 0/2] can: flexcan: " Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250312-flexcan-add-transceiver-caps-v4-2-29e89ae0225a@liebherr.com \
--to=devnull+dimitri.fedrau.liebherr.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dima.fedrau@gmail.com \
--cc=dimitri.fedrau@liebherr.com \
--cc=krzk+dt@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).