[PATCH] ARM: dts: renesas: r9a06g032: use proper ordering for UART DMA channels

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

Commit ec956e2c6f4e ("dt-bindings: serial: snps-dw-apb-uart: Switch
dma-names order") enforces "tx", "rx" ordering of DMA channels. Adhere
to it to let the dtbs_check pass it. There is no ABI breakage because
the Linux driver never expected a certain ordering and no other usage is
known.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm/boot/dts/renesas/r9a06g032.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 7548291c8d7e..87e03446fb4d 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -211,8 +211,8 @@ uart3: serial@50000000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 1 0 0 0 1 1>, <&dmamux 0 0 0 0 0 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -224,8 +224,8 @@ uart4: serial@50001000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 3 0 0 0 3 1>, <&dmamux 2 0 0 0 2 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -237,8 +237,8 @@ uart5: serial@50002000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 5 1>, <&dmamux 4 0 0 0 4 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -250,8 +250,8 @@ uart6: serial@50003000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 7 0 0 0 7 1>, <&dmamux 6 0 0 0 6 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -263,8 +263,8 @@ uart7: serial@50004000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 21 1>, <&dmamux 4 0 0 0 20 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-- 
2.47.2