Re: [PATCH v12 00/13] PCI: Use device bus range info to cleanup RC Host/EP pci_fixup_addr()

[Bjorn Helgaas <helgaas@kernel.org>]

On Sat, Mar 15, 2025 at 03:15:35PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> This is a v12 based on Frank's v11 series.
> 
> v11 https://lore.kernel.org/r/20250313-pci_fixup_addr-v11-0-01d2313502ab@nxp.com
>     
> Changes from v11:
>   - Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init(), before
>     any devicetree-related code
>   - Call devm_pci_epc_create() early in dw_pcie_ep_init(), before any
>     devicetree-related code
>   - Consolidate devicetree-related code in dw_pcie_host_get_resources() and
>     dw_pcie_ep_get_resources()
>   - Integrate dw_pcie_cfg0_setup() into dw_pcie_host_get_resources()
>   - Convert dw_pcie_init_parent_bus_offset() to dw_pcie_parent_bus_offset()
>     which returns the offset rather than setting it internally
>   - Split the debug comparison of devicetree info with .cpu_addr_fixup() to
>     separate patch so we can easily revert it later
>   - Drop "cpu_addr_fixup() usage detected" warning since we always warn
>     about something in that case anyway
> 
> Any comments welcome.
> 
> 
> Bjorn Helgaas (3):
>   PCI: dwc: Consolidate devicetree handling in
>     dw_pcie_host_get_resources()
>   PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
>   PCI: dwc: ep: Consolidate devicetree handling in
>     dw_pcie_ep_get_resources()
> 
> Frank Li (10):
>   PCI: dwc: Use resource start as iomap() input in
>     dw_pcie_pme_turn_off()
>   PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configuration
>   PCI: dwc: Call devm_pci_alloc_host_bridge() early in
>     dw_pcie_host_init()
>   PCI: dwc: Add dw_pcie_parent_bus_offset()
>   PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
>   PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr
>     offset
>   PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU
>     addr offset
>   PCI: dwc: ep: Ensure proper iteration over outbound map windows
>   PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
>   PCI: imx6: Remove cpu_addr_fixup()
> 
>  drivers/pci/controller/dwc/pci-imx6.c         | 18 +---
>  .../pci/controller/dwc/pcie-designware-ep.c   | 74 +++++++++++------
>  .../pci/controller/dwc/pcie-designware-host.c | 57 ++++++++-----
>  drivers/pci/controller/dwc/pcie-designware.c  | 82 ++++++++++++++-----
>  drivers/pci/controller/dwc/pcie-designware.h  | 24 +++++-
>  5 files changed, 171 insertions(+), 84 deletions(-)

Applied to pci/controller/dwc-cpu-addr-fixup for v6.15.

Thank you very much, Frank, for all your hard work on driving this
series!  I think this is a major improvement.