[PATCH v2 0/4] Add driver for AD3530R and AD3531R DACs

[Kim Seer Paller <kimseer.paller@analog.com>]

The AD3530R/AD3530 is an 8-Channel, 16-Bit Voltage Output DAC, while the
AD3531R/AD3531 is a 4-Channel, 16-Bit Voltage Output DAC. These devices
include software-programmable gain controls that provide full-scale
output spans of 2.5V or 5V for reference voltages of 2.5V. They operate
from a single supply voltage range of 2.7V to 5.5V and are guaranteed to
be monotonic by design. Additionally, these devices features a 2.5V,
5ppm/°C internal reference, which is disabled by default.

The AD3531R/AD3531 is not yet released, so the only available datasheet
for now is the AD3530R/AD3530. The only differences between the two is
the number of channels, and register addresses of some registers.

Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
---
Changes in v2:
Bindings:
- Updated commit message.
- Changed adi,double-output-range to adi,range-double property.

ad3530r:
- Changed data type to __be16 to resolve sparse warnings related to
  type mismatches.

- Link to v1: https://lore.kernel.org/r/20250319-togreg-v1-0-d8244a502f2c@analog.com

---
Kim Seer Paller (4):
      iio: ABI: add new DAC powerdown mode
      iio: dac: ad3530r: Add ABI file for the AD3530R DAC
      dt-bindings: iio: dac: Add adi,ad3530r.yaml
      iio: dac: ad3530r: Add driver for AD3530R and AD3531R

 Documentation/ABI/testing/sysfs-bus-iio            |   2 +
 .../ABI/testing/sysfs-bus-iio-dac-ad3530r          |  68 +++
 .../devicetree/bindings/iio/dac/adi,ad3530r.yaml   |  91 ++++
 MAINTAINERS                                        |   9 +
 drivers/iio/dac/Kconfig                            |  11 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad3530r.c                          | 586 +++++++++++++++++++++
 7 files changed, 768 insertions(+)
---
base-commit: 8dbeb413806f9f810d97d25284f585b201aa3bdc
change-id: 20250319-togreg-fc6a0af961ed

Best regards,
-- 
Kim Seer Paller <kimseer.paller@analog.com>