devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	Frank Li <Frank.li@nxp.com>,
	Marco Felsch <m.felsch@pengutronix.de>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/5] bus: add driver for IMX AIPSTZ bridge
Date: Mon, 24 Mar 2025 12:25:54 -0400	[thread overview]
Message-ID: <20250324162556.30972-4-laurentiumihalcea111@gmail.com> (raw)
In-Reply-To: <20250324162556.30972-1-laurentiumihalcea111@gmail.com>

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The secure AHB to IP Slave (AIPSTZ) bus bridge provides access control
configurations meant to restrict access to certain peripherals.
Some of the configurations include:

	1) Marking masters as trusted for R/W. Based on this
	(and the configuration of the accessed peripheral), the bridge
	may choose to abort the R/W transactions issued by certain
	masters.

	2) Allowing/disallowing write accesses to peripherals.

Add driver for this IP. Since there's currently no framework for
access controllers (and since there's currently no need for having
flexibility w.r.t the configurations) all this driver does is it
applies a relaxed, "default" configuration, in which all masters
are trusted for R/W.

Note that some instances of this IP (e.g: AIPSTZ5 on i.MX8MP) may be tied
to a power domain and may lose their configuration when the domain is
powered off. This is why the configuration has to be restored when the
domain is powered on.

Co-developed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/bus/Kconfig      |  6 +++
 drivers/bus/Makefile     |  1 +
 drivers/bus/imx-aipstz.c | 92 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 drivers/bus/imx-aipstz.c

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index ff669a8ccad9..fe7600283e70 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -87,6 +87,12 @@ config HISILICON_LPC
 	  Driver to enable I/O access to devices attached to the Low Pin
 	  Count bus on the HiSilicon Hip06/7 SoC.
 
+config IMX_AIPSTZ
+	tristate "Support for IMX Secure AHB to IP Slave bus (AIPSTZ) bridge"
+	depends on ARCH_MXC
+	help
+	  Enable support for IMX AIPSTZ bridge.
+
 config IMX_WEIM
 	bool "Freescale EIM DRIVER"
 	depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index cddd4984d6af..8e693fe8a03a 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_FSL_MC_BUS)	+= fsl-mc/
 
 obj-$(CONFIG_BT1_APB)		+= bt1-apb.o
 obj-$(CONFIG_BT1_AXI)		+= bt1-axi.o
+obj-$(CONFIG_IMX_AIPSTZ)	+= imx-aipstz.o
 obj-$(CONFIG_IMX_WEIM)		+= imx-weim.o
 obj-$(CONFIG_INTEL_IXP4XX_EB)	+= intel-ixp4xx-eb.o
 obj-$(CONFIG_MIPS_CDMM)		+= mips_cdmm.o
diff --git a/drivers/bus/imx-aipstz.c b/drivers/bus/imx-aipstz.c
new file mode 100644
index 000000000000..538ad89dba30
--- /dev/null
+++ b/drivers/bus/imx-aipstz.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2025 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#define IMX_AIPSTZ_MPR0 0x0
+
+struct imx_aipstz_config {
+	u32 mpr0;
+};
+
+static void imx_aipstz_apply_default(void __iomem *base,
+				     const struct imx_aipstz_config *default_cfg)
+{
+	writel(default_cfg->mpr0, base + IMX_AIPSTZ_MPR0);
+}
+
+static int imx_aipstz_probe(struct platform_device *pdev)
+{
+	const struct imx_aipstz_config *default_cfg;
+	void __iomem *base;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "ac");
+	if (IS_ERR(base))
+		return dev_err_probe(&pdev->dev, -ENOMEM,
+				     "failed to get/ioremap AC memory\n");
+
+	default_cfg = of_device_get_match_data(&pdev->dev);
+
+	imx_aipstz_apply_default(base, default_cfg);
+
+	dev_set_drvdata(&pdev->dev, base);
+
+	pm_runtime_set_active(&pdev->dev);
+	devm_pm_runtime_enable(&pdev->dev);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static int imx_aipstz_runtime_resume(struct device *dev)
+{
+	const struct imx_aipstz_config *default_cfg;
+	void __iomem *base;
+
+	base = dev_get_drvdata(dev);
+	default_cfg = of_device_get_match_data(dev);
+
+	/* restore potentially lost configuration during domain power-off */
+	imx_aipstz_apply_default(base, default_cfg);
+
+	return 0;
+}
+
+static const struct dev_pm_ops imx_aipstz_pm_ops = {
+	RUNTIME_PM_OPS(NULL, imx_aipstz_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
+/*
+ * following configuration is equivalent to:
+ *	masters 0-7 => trusted for R/W + use AHB's HPROT[1] to det. privilege
+ */
+static const struct imx_aipstz_config imx8mp_aipstz_default_cfg = {
+	.mpr0 = 0x77777777,
+};
+
+static const struct of_device_id imx_aipstz_of_ids[] = {
+	{ .compatible = "fsl,imx8mp-aipstz", .data = &imx8mp_aipstz_default_cfg },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx_aipstz_of_ids);
+
+static struct platform_driver imx_aipstz_of_driver = {
+	.probe = imx_aipstz_probe,
+	.driver = {
+		.name = "imx-aipstz",
+		.of_match_table = imx_aipstz_of_ids,
+		.pm = pm_ptr(&imx_aipstz_pm_ops),
+	},
+};
+module_platform_driver(imx_aipstz_of_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IMX secure AHB to IP Slave bus (AIPSTZ) bridge driver");
+MODULE_AUTHOR("Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>");
-- 
2.34.1


  parent reply	other threads:[~2025-03-24 16:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-24 16:25 [PATCH v3 0/5] imx8mp: add support for the IMX AIPSTZ bridge Laurentiu Mihalcea
2025-03-24 16:25 ` [PATCH v3 1/5] dt-bindings: bus: add documentation " Laurentiu Mihalcea
2025-03-25  3:23   ` Rob Herring
2025-03-26 10:25     ` Marco Felsch
2025-03-26 12:25       ` Marco Felsch
2025-03-28 12:34     ` Mihalcea Laurentiu
2025-03-31  6:41       ` Marco Felsch
2025-03-31 11:57         ` Mihalcea Laurentiu
2025-03-31 14:15       ` Rob Herring
2025-03-24 16:25 ` [PATCH v3 2/5] dt-bindings: dsp: fsl,dsp: document 'access-controllers' property Laurentiu Mihalcea
2025-03-24 16:25 ` Laurentiu Mihalcea [this message]
2025-03-24 16:25 ` [PATCH v3 4/5] arm64: dts: imx8mp: convert 'aips5' to 'aipstz5' Laurentiu Mihalcea
2025-03-24 16:25 ` [PATCH v3 5/5] arm64: dts: imx8mp: make 'dsp' node depend on 'aips5' Laurentiu Mihalcea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250324162556.30972-4-laurentiumihalcea111@gmail.com \
    --to=laurentiumihalcea111@gmail.com \
    --cc=Frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=mkl@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).