Re: [PATCH 1/1] media: dt-bindings: Add OmniVision OV02C10

[Rob Herring <robh@kernel.org>]

On Mon, Mar 24, 2025 at 12:09:12AM +0000, Bryan O'Donoghue wrote:
> Add bindings for OVO2C10 a two megapixel 1080p RGB sensor.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  .../bindings/media/i2c/ovti,ov02c10.yaml      | 117 ++++++++++++++++++
>  1 file changed, 117 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02c10.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02c10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02c10.yaml
> new file mode 100644
> index 000000000000..6380a17fe65f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02c10.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2025 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02c10.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV02C10 CMOS Sensor
> +
> +maintainers:
> +  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> +
> +description: |
> +  The Omnivision OV02C10 is a 2 megapixel, CMOS image sensor which supports:
> +  - Automatic black level calibration (ABLC)
> +  - Programmable controls for frame rate, mirror and flip, binning, cropping
> +    and windowing
> +  - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
> +  - 2-lane MIPI D-PHY TX @ 800 Mbps per lane
> +  - 1-lane MIPI D-PHY TX @ 1.5 Gbps per lane
> +  - Dynamic defect pixel cancellation
> +  - Standard SCCB command interface
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> +  compatible:
> +    const: ovti,ov02c10
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  avdd-supply:
> +    description: Analogue circuit voltage supply.
> +
> +  dovdd-supply:
> +    description: I/O circuit voltage supply.
> +
> +  dvdd-supply:
> +    description: Digital circuit voltage supply.
> +
> +  reset-gpios:
> +    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        additionalProperties: false
> +
> +        properties:
> +          data-lanes:
> +            oneOf:
> +              - items:
> +                  - const: 1
> +              - items:
> +                  - const: 1
> +                  - const: 2

minItems: 1

And drop the first oneOf entry (and oneOf).

> +          link-frequencies: true
> +          remote-endpoint: true
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +          - remote-endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov02c10: camera@36 {
> +            compatible = "ovti,ov02c10";
> +            reg = <0x36>;
> +
> +            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&cam_rgb_defaultt>;
> +
> +            clocks = <&ov02c10_clk>;
> +
> +            assigned-clocks = <&ov02c10_clk>;
> +            assigned-clock-parents = <&ov02c10_clk_parent>;
> +            assigned-clock-rates = <19200000>;
> +
> +            avdd-supply = <&vreg_l7b_2p8>;
> +            dvdd-supply = <&vreg_l7b_1p8>;
> +            dovdd-supply = <&vreg_l3m_1p8>;
> +
> +            port {
> +                ov02c10_ep: endpoint {
> +                    remote-endpoint = <&csiphy4_ep>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies = /bits/ 64 <400000000>;
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.49.0
>