From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Viresh Kumar <vireshk@kernel.org>,
Shiraz Hashim <shiraz.linux.kernel@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
soc@lists.linux.dev, devicetree@vger.kernel.org
Subject: [PATCH v2 3/5] ARM: dts: st: use correct ohci/ehci node names
Date: Sun, 30 Mar 2025 21:38:34 +0200 [thread overview]
Message-ID: <20250330193833.21970-10-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20250330193833.21970-7-wsa+renesas@sang-engineering.com>
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/st/spear1310-evb.dts | 8 ++++----
arch/arm/boot/dts/st/spear1340-evb.dts | 8 ++++----
arch/arm/boot/dts/st/spear13xx.dtsi | 8 ++++----
arch/arm/boot/dts/st/spear300-evb.dts | 6 +++---
arch/arm/boot/dts/st/spear310-evb.dts | 6 +++---
arch/arm/boot/dts/st/spear320-evb.dts | 6 +++---
arch/arm/boot/dts/st/spear320-hmi.dts | 6 +++---
arch/arm/boot/dts/st/spear3xx.dtsi | 6 +++---
arch/arm/boot/dts/st/spear600.dtsi | 8 ++++----
9 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/st/spear1310-evb.dts b/arch/arm/boot/dts/st/spear1310-evb.dts
index ad216571ba57..089bd7db55c7 100644
--- a/arch/arm/boot/dts/st/spear1310-evb.dts
+++ b/arch/arm/boot/dts/st/spear1310-evb.dts
@@ -205,19 +205,19 @@ partition@390000 {
};
};
- ehci@e4800000 {
+ usb@e4800000 {
status = "okay";
};
- ehci@e5800000 {
+ usb@e5800000 {
status = "okay";
};
- ohci@e4000000 {
+ usb@e4000000 {
status = "okay";
};
- ohci@e5000000 {
+ usb@e5000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear1340-evb.dts b/arch/arm/boot/dts/st/spear1340-evb.dts
index 9b515b21a633..d24146c3c9e8 100644
--- a/arch/arm/boot/dts/st/spear1340-evb.dts
+++ b/arch/arm/boot/dts/st/spear1340-evb.dts
@@ -203,7 +203,7 @@ partition@390000 {
};
};
- ehci@e4800000 {
+ usb@e4800000 {
status = "okay";
};
@@ -221,7 +221,7 @@ button@1 {
};
};
- ehci@e5800000 {
+ usb@e5800000 {
status = "okay";
};
@@ -238,11 +238,11 @@ incodec: dir-hifi {
status = "okay";
};
- ohci@e4000000 {
+ usb@e4000000 {
status = "okay";
};
- ohci@e5000000 {
+ usb@e5000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear13xx.dtsi b/arch/arm/boot/dts/st/spear13xx.dtsi
index 3b6897084e26..76749992394d 100644
--- a/arch/arm/boot/dts/st/spear13xx.dtsi
+++ b/arch/arm/boot/dts/st/spear13xx.dtsi
@@ -174,7 +174,7 @@ smi: flash@ea000000 {
status = "disabled";
};
- ehci@e4800000 {
+ usb@e4800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe4800000 0x1000>;
interrupts = <0 64 0x4>;
@@ -182,7 +182,7 @@ ehci@e4800000 {
status = "disabled";
};
- ehci@e5800000 {
+ usb@e5800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe5800000 0x1000>;
interrupts = <0 66 0x4>;
@@ -190,7 +190,7 @@ ehci@e5800000 {
status = "disabled";
};
- ohci@e4000000 {
+ usb@e4000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe4000000 0x1000>;
interrupts = <0 65 0x4>;
@@ -198,7 +198,7 @@ ohci@e4000000 {
status = "disabled";
};
- ohci@e5000000 {
+ usb@e5000000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe5000000 0x1000>;
interrupts = <0 67 0x4>;
diff --git a/arch/arm/boot/dts/st/spear300-evb.dts b/arch/arm/boot/dts/st/spear300-evb.dts
index 303ef29fb805..7d4e6412d558 100644
--- a/arch/arm/boot/dts/st/spear300-evb.dts
+++ b/arch/arm/boot/dts/st/spear300-evb.dts
@@ -119,15 +119,15 @@ spi0: spi@d0100000 {
status = "okay";
};
- ehci@e1800000 {
+ usb@e1800000 {
status = "okay";
};
- ohci@e1900000 {
+ usb@e1900000 {
status = "okay";
};
- ohci@e2100000 {
+ usb@e2100000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear310-evb.dts b/arch/arm/boot/dts/st/spear310-evb.dts
index ea0b53036f7b..459182210825 100644
--- a/arch/arm/boot/dts/st/spear310-evb.dts
+++ b/arch/arm/boot/dts/st/spear310-evb.dts
@@ -133,15 +133,15 @@ spi0: spi@d0100000 {
status = "okay";
};
- ehci@e1800000 {
+ usb@e1800000 {
status = "okay";
};
- ohci@e1900000 {
+ usb@e1900000 {
status = "okay";
};
- ohci@e2100000 {
+ usb@e2100000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear320-evb.dts b/arch/arm/boot/dts/st/spear320-evb.dts
index 3c026d021c92..6ac53d993cf3 100644
--- a/arch/arm/boot/dts/st/spear320-evb.dts
+++ b/arch/arm/boot/dts/st/spear320-evb.dts
@@ -142,15 +142,15 @@ spi2: spi@a6000000 {
status = "okay";
};
- ehci@e1800000 {
+ usb@e1800000 {
status = "okay";
};
- ohci@e1900000 {
+ usb@e1900000 {
status = "okay";
};
- ohci@e2100000 {
+ usb@e2100000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear320-hmi.dts b/arch/arm/boot/dts/st/spear320-hmi.dts
index 721e5ee7b680..8010918e5257 100644
--- a/arch/arm/boot/dts/st/spear320-hmi.dts
+++ b/arch/arm/boot/dts/st/spear320-hmi.dts
@@ -92,7 +92,7 @@ dma@fc400000 {
status = "okay";
};
- ehci@e1800000 {
+ usb@e1800000 {
status = "okay";
};
@@ -147,11 +147,11 @@ button@2 {
};
};
- ohci@e1900000 {
+ usb@e1900000 {
status = "okay";
};
- ohci@e2100000 {
+ usb@e2100000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/st/spear3xx.dtsi b/arch/arm/boot/dts/st/spear3xx.dtsi
index cc88ebe7a60c..f54bb80ba28a 100644
--- a/arch/arm/boot/dts/st/spear3xx.dtsi
+++ b/arch/arm/boot/dts/st/spear3xx.dtsi
@@ -73,21 +73,21 @@ spi0: spi@d0100000 {
status = "disabled";
};
- ehci@e1800000 {
+ usb@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupts = <26>;
status = "disabled";
};
- ohci@e1900000 {
+ usb@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupts = <25>;
status = "disabled";
};
- ohci@e2100000 {
+ usb@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupts = <27>;
diff --git a/arch/arm/boot/dts/st/spear600.dtsi b/arch/arm/boot/dts/st/spear600.dtsi
index 6b67c0ceaed9..9a93367445ca 100644
--- a/arch/arm/boot/dts/st/spear600.dtsi
+++ b/arch/arm/boot/dts/st/spear600.dtsi
@@ -91,7 +91,7 @@ smi: flash@fc000000 {
status = "disabled";
};
- ehci_usb0: ehci@e1800000 {
+ ehci_usb0: usb@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
@@ -99,7 +99,7 @@ ehci_usb0: ehci@e1800000 {
status = "disabled";
};
- ehci_usb1: ehci@e2000000 {
+ ehci_usb1: usb@e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
@@ -107,7 +107,7 @@ ehci_usb1: ehci@e2000000 {
status = "disabled";
};
- ohci_usb0: ohci@e1900000 {
+ ohci_usb0: usb@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
@@ -115,7 +115,7 @@ ohci_usb0: ohci@e1900000 {
status = "disabled";
};
- ohci_usb1: ohci@e2100000 {
+ ohci_usb1: usb@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
--
2.47.2
next prev parent reply other threads:[~2025-03-30 19:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-30 19:38 [PATCH v2 0/5] ARM: dts: use correct ohci/ehci node names Wolfram Sang
2025-03-30 19:38 ` [PATCH v2 1/5] ARM: dts: marvell: " Wolfram Sang
2025-03-31 9:42 ` Gregory CLEMENT
2025-03-30 19:38 ` [PATCH v2 2/5] ARM: dts: nxp: lpc: " Wolfram Sang
2025-03-30 19:38 ` Wolfram Sang [this message]
2025-03-30 19:38 ` [PATCH v2 4/5] ARM: dts: ti: omap: " Wolfram Sang
2025-04-11 0:34 ` Kevin Hilman
2025-03-30 19:38 ` [PATCH v2 5/5] ARM: dts: vt8500: " Wolfram Sang
2025-04-16 7:41 ` (subset) " Krzysztof Kozlowski
2025-04-16 7:43 ` Krzysztof Kozlowski
2025-04-16 7:58 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250330193833.21970-10-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh@kernel.org \
--cc=shiraz.linux.kernel@gmail.com \
--cc=soc@lists.linux.dev \
--cc=vireshk@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).