From: Kim Seer Paller <kimseer.paller@analog.com>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
Kim Seer Paller <kimseer.paller@analog.com>
Subject: [PATCH v3 0/3] Add driver for AD3530R and AD3531R DACs
Date: Thu, 3 Apr 2025 13:33:54 +0800 [thread overview]
Message-ID: <20250403-togreg-v3-0-d4b06a4af5a9@analog.com> (raw)
The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are
low-power, 16-bit, buffered voltage output DACs with software-
programmable gain controls, providing full-scale output spans of 2.5V or
5V for reference voltages of 2.5V. These devices operate from a single
2.7V to 5.5V supply and are guaranteed monotonic by design. The "R"
variants include a 2.5V, 5ppm/°C internal reference, which is disabled
by default.
The AD3531R/AD3531 is not yet released, so the only available datasheet
for now is the AD3530R/AD3530. The only differences between the two is
the number of channels, and register addresses of some registers.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
---
Changes in v3:
- Drop ABI docs.
Bindings:
- Drop reviewer's tag.
- Update commit message.
- Add non-r variants to compatible list.
- Add io-channels property to enable ADC channel support for MUXOUT
readings.
- Switch to unevaluatedProperties: false.
ad3530r:
- Update commit message.
- Drop spi field from ad3530r_state and use regmap to retrieve the device
pointer.
- Update mutex lock comment and use devm_mutex_init().
- Fix LDAC gpio pulse logic.
- Replace usleep_range() with fsleep().
- Use sizeof(reg_val) instead of hardcoded value in regmap_bulk_read.
- Drop reporting of zero offset.
- Add internal_ref_support chip_info parameter and modify reference
handling.
- Link to v2: https://lore.kernel.org/r/20250324-togreg-v2-0-f211d781923e@analog.com
Changes in v2:
Bindings:
- Updated commit message.
- Changed adi,double-output-range to adi,range-double property.
ad3530r:
- Changed data type to __be16 to resolve sparse warnings related to
type mismatches.
- Link to v1: https://lore.kernel.org/r/20250319-togreg-v1-0-d8244a502f2c@analog.com
---
Kim Seer Paller (3):
iio: ABI: add new DAC powerdown mode
dt-bindings: iio: dac: Add adi,ad3530r.yaml
iio: dac: ad3530r: Add driver for AD3530R and AD3531R
Documentation/ABI/testing/sysfs-bus-iio | 2 +
.../devicetree/bindings/iio/dac/adi,ad3530r.yaml | 99 ++++
MAINTAINERS | 8 +
drivers/iio/dac/Kconfig | 11 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ad3530r.c | 514 +++++++++++++++++++++
6 files changed, 635 insertions(+)
---
base-commit: 8dbeb413806f9f810d97d25284f585b201aa3bdc
change-id: 20250319-togreg-fc6a0af961ed
Best regards,
--
Kim Seer Paller <kimseer.paller@analog.com>
next reply other threads:[~2025-04-03 5:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-03 5:33 Kim Seer Paller [this message]
2025-04-03 5:33 ` [PATCH v3 1/3] iio: ABI: add new DAC powerdown mode Kim Seer Paller
2025-04-03 5:33 ` [PATCH v3 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml Kim Seer Paller
2025-04-03 6:27 ` Rob Herring (Arm)
2025-04-03 6:44 ` Krzysztof Kozlowski
2025-04-03 6:59 ` Paller, Kim Seer
2025-04-03 7:02 ` Krzysztof Kozlowski
2025-04-03 7:11 ` Paller, Kim Seer
2025-04-03 7:22 ` Krzysztof Kozlowski
2025-04-03 7:22 ` Krzysztof Kozlowski
2025-04-03 11:15 ` Nuno Sá
2025-04-04 16:28 ` David Lechner
2025-04-03 5:33 ` [PATCH v3 3/3] iio: dac: ad3530r: Add driver for AD3530R and AD3531R Kim Seer Paller
2025-04-03 11:31 ` Nuno Sá
2025-04-04 17:48 ` David Lechner
2025-04-07 8:01 ` Paller, Kim Seer
2025-04-08 14:06 ` David Lechner
2025-04-10 8:39 ` Paller, Kim Seer
2025-04-10 14:11 ` David Lechner
2025-04-05 16:11 ` Jonathan Cameron
2025-04-07 8:07 ` Paller, Kim Seer
2025-04-03 6:43 ` [PATCH v3 0/3] Add driver for AD3530R and AD3531R DACs Krzysztof Kozlowski
2025-04-03 6:58 ` Paller, Kim Seer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250403-togreg-v3-0-d4b06a4af5a9@analog.com \
--to=kimseer.paller@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox