Re: [PATCH 3/4] dt-bindings: clock: ti: Convert fixed-factor-clock to yaml

[Rob Herring <robh@kernel.org>]

On Thu, Apr 03, 2025 at 06:44:59PM -0700, Sukrut Bellary wrote:
> Convert TI fixed-factor-clock binding to yaml.
> 
> This uses the ti,autoidle.yaml for clock autoidle support.
> Clean up the example to meet the current standards.
> 
> Add the creator of the original binding as a maintainer.
> 
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> ---
>  .../bindings/clock/ti/fixed-factor-clock.txt  | 42 ----------
>  .../clock/ti/ti,fixed-factor-clock.yaml       | 77 +++++++++++++++++++
>  2 files changed, 77 insertions(+), 42 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
> deleted file mode 100644
> index dc69477b6e98..000000000000
> --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Binding for TI fixed factor rate clock sources.
> -
> -This binding uses the common clock binding[1], and also uses the autoidle
> -support from TI autoidle clock [2].
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
> -
> -Required properties:
> -- compatible : shall be "ti,fixed-factor-clock".
> -- #clock-cells : from common clock binding; shall be set to 0.
> -- ti,clock-div: fixed divider.
> -- ti,clock-mult: fixed multiplier.
> -- clocks: parent clock.
> -
> -Optional properties:
> -- clock-output-names : from common clock binding.
> -- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
> -  see [2]
> -- reg: offset for the autoidle register of this clock, see [2]
> -- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
> -- ti,set-rate-parent: clk_set_rate is propagated to parent
> -
> -Example:
> -	clock {
> -		compatible = "ti,fixed-factor-clock";
> -		clocks = <&parentclk>;
> -		#clock-cells = <0>;
> -		ti,clock-div = <2>;
> -		ti,clock-mult = <1>;
> -	};
> -
> -	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
> -		#clock-cells = <0>;
> -		compatible = "ti,fixed-factor-clock";
> -		clocks = <&dpll_usb_ck>;
> -		ti,clock-div = <1>;
> -		ti,autoidle-shift = <8>;
> -		reg = <0x01b4>;
> -		ti,clock-mult = <1>;
> -		ti,invert-autoidle-bit;
> -	};
> diff --git a/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
> new file mode 100644
> index 000000000000..f597aedbad05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ti/ti,fixed-factor-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI fixed factor rate clock sources
> +
> +maintainers:
> +  - Tero Kristo <kristo@kernel.org>
> +  - Sukrut Bellary <sbellary@baylibre.com>
> +
> +description: |

Don't need '|'.

> +  This consists of a divider and a multiplier used to generate
> +  a fixed rate clock. This also uses the autoidle support from
> +  TI autoidle clock.
> +
> +allOf:
> +  - $ref: /schemas/clock/ti/ti,autoidle.yaml#

You can drop '/schemas/clock/ti/'

> +
> +properties:
> +  compatible:
> +    const: ti,fixed-factor-clock
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  ti,clock-div:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Fixed divider

Constraints?

> +
> +  ti,clock-mult:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Fixed multiplier

Constraints?

> +
> +  clocks:

       maxItems: 1

> +    description:
> +      Link to phandle of parent clock.

Drop the description

> +
> +  clock-output-names:

       maxItems: 1

> +    description:
> +      From common clock binding

Drop

> +
> +  ti,set-rate-parent:
> +    description:
> +      Propagate to parent clock
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - clocks
> +  - "#clock-cells"
> +  - ti,clock-mult
> +  - ti,clock-div
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    bus{
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        clock@1b4 {
> +            compatible = "ti,fixed-factor-clock";
> +            reg = <0x1b4>;
> +            clocks = <&dpll_usb_ck>;
> +            #clock-cells = <0>;
> +            ti,clock-mult = <1>;
> +            ti,clock-div = <1>;
> +            ti,autoidle-shift = <8>;
> +            ti,invert-autoidle-bit;
> +        };
> +    };
> -- 
> 2.34.1
>