[PATCH 1/1] dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format

[PATCH 1/1] dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format

[Frank Li]

Convert fsl,vf610-mscm-ir.txt to yaml format.

Additional changes:
- remove label at example dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../arm/freescale/fsl,vf610-mscm-ir.txt       | 30 ---------
 .../arm/freescale/fsl,vf610-mscm-ir.yaml      | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
 create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.yaml

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
deleted file mode 100644
index 6dd6f399236d5..0000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - Interrupt Router
-
-The MSCM IP contains multiple sub modules, this binding describes the second
-block of registers which control the interrupt router. The interrupt router
-allows to configure the recipient of each peripheral interrupt. Furthermore
-it controls the directed processor interrupts. The module is available in all
-Vybrid SoC's but is only really useful in dual core configurations (VF6xx
-which comes with a Cortex-A5/Cortex-M4 combination).
-
-Required properties:
-- compatible:		"fsl,vf610-mscm-ir"
-- reg:			the register range of the MSCM Interrupt Router
-- fsl,cpucfg:		The handle to the MSCM CPU configuration node, required
-			to get the current CPU ID
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Two cells, interrupt number and cells.
-			The hardware interrupt number according to interrupt
-			assignment of the interrupt router is required.
-			Flags get passed only when using GIC as parent. Flags
-			encoding as documented by the GIC bindings.
-
-Example:
-	mscm_ir: interrupt-controller@40001800 {
-		compatible = "fsl,vf610-mscm-ir";
-		reg = <0x40001800 0x400>;
-		fsl,cpucfg = <&mscm_cpucfg>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.yaml
new file mode 100644
index 0000000000000..72736f6f5c24a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,vf610-mscm-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+description:
+  The MSCM IP contains multiple sub modules, this binding describes the second
+  block of registers which control the interrupt router. The interrupt router
+  allows to configure the recipient of each peripheral interrupt. Furthermore
+  it controls the directed processor interrupts. The module is available in all
+  Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+  which comes with a Cortex-A5/Cortex-M4 combination).
+
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-mscm-ir
+
+  reg:
+    maxItems: 1
+
+  fsl,cpucfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The handle to the MSCM CPU configuration node, required
+      to get the current CPU ID
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Two cells, interrupt number and cells.
+      The hardware interrupt number according to interrupt
+      assignment of the interrupt router is required.
+      Flags get passed only when using GIC as parent. Flags
+      encoding as documented by the GIC bindings.
+
+required:
+  - compatible
+  - reg
+  - fsl,cpucfg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@40001800 {
+        compatible = "fsl,vf610-mscm-ir";
+        reg = <0x40001800 0x400>;
+        fsl,cpucfg = <&mscm_cpucfg>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+    };
-- 
2.34.1

Re: [PATCH 1/1] dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format

[Rob Herring]

On Thu, Apr 17, 2025 at 11:15:22AM -0400, Frank Li wrote:
> Convert fsl,vf610-mscm-ir.txt to yaml format.
> 
> Additional changes:
> - remove label at example dts.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../arm/freescale/fsl,vf610-mscm-ir.txt       | 30 ---------
>  .../arm/freescale/fsl,vf610-mscm-ir.yaml      | 63 +++++++++++++++++++
>  2 files changed, 63 insertions(+), 30 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.yaml

Move this to bindings/interrupt-controller/