From: Judith Mendez <jm@ti.com>
To: Judith Mendez <jm@ti.com>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Hari Nagalla <hnagalla@ti.com>, Beleswar Padhi <b-padhi@ti.com>,
Markus Schneider-Pargmann <msp@baylibre.com>,
Andrew Davis <afd@ti.com>, Devarsh Thakkar <devarsht@ti.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v8 11/11] arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
Date: Fri, 2 May 2025 17:03:25 -0500 [thread overview]
Message-ID: <20250502220325.3230653-12-jm@ti.com> (raw)
In-Reply-To: <20250502220325.3230653-1-jm@ti.com>
From: Hari Nagalla <hnagalla@ti.com>
AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
main domain timers as tick timers in these firmwares. Hence keep them
as reserved in the Linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 20 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 20 ++++++++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index f8ec40523254..5623ab354a1d 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -796,6 +796,26 @@ &mcu_m4fss {
status = "okay";
};
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+ status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+ status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+ status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+ status = "reserved";
+};
+
&serdes_ln_ctrl {
idle-states = <AM64_SERDES0_LANE0_PCIE0>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 33e421ec18ab..1deaa0be0085 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -710,6 +710,26 @@ &mcu_m4fss {
status = "okay";
};
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+ status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+ status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+ status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+ status = "reserved";
+};
+
&ecap0 {
status = "okay";
/* PWM is available on Pin 1 of header J3 */
--
2.49.0
next prev parent reply other threads:[~2025-05-02 22:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-02 22:03 [PATCH v8 00/11] Add R5F and C7xv device nodes Judith Mendez
2025-05-02 22:03 ` [PATCH v8 01/11] arm64: dts: ti: k3-am62: Add ATCM and BTCM cbass ranges Judith Mendez
2025-05-02 22:03 ` [PATCH v8 02/11] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node Judith Mendez
2025-05-05 9:29 ` Daniel Schultz
2025-05-02 22:03 ` [PATCH v8 03/11] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node Judith Mendez
2025-05-05 9:55 ` Daniel Schultz
2025-05-05 15:05 ` Mendez, Judith
2025-05-05 15:22 ` Andrew Davis
2025-05-05 16:00 ` Daniel Schultz
2025-05-05 17:23 ` Andrew Davis
2025-05-06 11:24 ` Daniel Schultz
2025-05-06 11:20 ` Daniel Schultz
2025-05-02 22:03 ` [PATCH v8 04/11] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node Judith Mendez
2025-05-05 9:30 ` Daniel Schultz
2025-05-02 22:03 ` [PATCH v8 05/11] arm64: dts: ti: k3-am62a-main: Add C7xv " Judith Mendez
2025-05-05 9:29 ` Daniel Schultz
2025-05-02 22:03 ` [PATCH v8 06/11] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors Judith Mendez
2025-05-02 22:03 ` [PATCH v8 07/11] arm64: dts: ti: k3-am62p5-sk: " Judith Mendez
2025-05-02 22:03 ` [PATCH v8 08/11] arm64: dts: ti: k3-am62x-sk-common: " Judith Mendez
2025-05-02 22:03 ` [PATCH v8 09/11] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP Judith Mendez
2025-05-02 22:03 ` [PATCH v8 10/11] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 " Judith Mendez
2025-05-02 22:03 ` Judith Mendez [this message]
2025-05-06 13:09 ` [PATCH v8 00/11] Add R5F and C7xv device nodes Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250502220325.3230653-12-jm@ti.com \
--to=jm@ti.com \
--cc=afd@ti.com \
--cc=b-padhi@ti.com \
--cc=conor+dt@kernel.org \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hnagalla@ti.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=msp@baylibre.com \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox