[PATCH] dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema

[PATCH] dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema

[Rob Herring (Arm)]

Convert the TI Wakeup Generator interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../ti,omap4-wugen-mpu.txt                    | 31 -----------
 .../ti,omap4-wugen-mpu.yaml                   | 55 +++++++++++++++++++
 2 files changed, 55 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt
deleted file mode 100644
index 422d6908f8b2..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-TI OMAP4 Wake-up Generator
-
-All TI OMAP4/5 (and their derivatives) an interrupt controller that
-routes interrupts to the GIC, and also serves as a wakeup source. It
-is also referred to as "WUGEN-MPU", hence the name of the binding.
-
-Required properties:
-
-- compatible : should contain at least "ti,omap4-wugen-mpu" or
-  "ti,omap5-wugen-mpu"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
-  interrupt specifier must be that of the GIC.
-- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
-  are explicitly forbidden.
-
-Example:
-
-       wakeupgen: interrupt-controller@48281000 {
-               compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-               interrupt-controller;
-               #interrupt-cells = <3>;
-               reg = <0x48281000 0x1000>;
-               interrupt-parent = <&gic>;
-       };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
new file mode 100644
index 000000000000..6e3d6e6d9e07
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,omap4-wugen-mpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP4 Wake-up Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: >
+  All TI OMAP4/5 (and their derivatives) are interrupt controllers that route
+  interrupts to the GIC, and also serve as wakeup sources. They are also
+  referred to as "WUGEN-MPU", hence the name of the binding.
+
+  Notes:
+
+    - Because this HW ultimately routes interrupts to the GIC, the interrupt
+      specifier must be that of the GIC.
+    - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs are
+      explicitly forbidden.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ti,omap5-wugen-mpu
+          - const: ti,omap4-wugen-mpu
+      - const: ti,omap4-wugen-mpu
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48281000 {
+        compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+        reg = <0x48281000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
-- 
2.47.2