public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>,
	Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	linux-amarula@amarulasolutions.com,
	Abel Vesa <abelvesa@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v12 16/19] dt-bindings: clock: imx8m-clock: add PLLs
Date: Fri, 9 May 2025 11:25:46 -0500	[thread overview]
Message-ID: <20250509162546.GA3704130-robh@kernel.org> (raw)
In-Reply-To: <20250424062154.2999219-17-dario.binacchi@amarulasolutions.com>

On Thu, Apr 24, 2025 at 08:21:46AM +0200, Dario Binacchi wrote:
> Though adding the PLLs to clocks and clock-names properties will break
> the ABI, it is required to accurately describe the hardware. Indeed,
> the Clock Control Module (CCM) receives clocks from the PLLs and
> oscillators and generates clocks for on-chip peripherals.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> (no changes since v11)
> 
> Changes in v11:
> - Fix conflict while rebasing on master
> 
> Changes in v7:
> - Add 'Reviewed-by' tag of Krzysztof Kozlowski
> 
> Changes in v6:
> - New
> 
>  .../bindings/clock/imx8m-clock.yaml           | 27 ++++++++++++++-----
>  1 file changed, 21 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> index 4fec55832702..e83f08abd44c 100644
> --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> @@ -29,12 +29,12 @@ properties:
>      maxItems: 2
>  
>    clocks:
> -    minItems: 6
> -    maxItems: 7
> +    minItems: 7

Increasing the minimum entries looks like an ABI break to me. The .dts 
files not being in linux-next confirms that (from 0 warnings in 
mainline):

arch/arm64/boot/dts/freescale:859:50
    122  clock-controller@30380000 (fsl,imx8mm-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
    120  clock-controller@30380000 (fsl,imx8mp-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
     61  clock-controller@30360000 (fsl,imx8mm-anatop): 'clocks' is a required property
     61  clock-controller@30360000 (fsl,imx8mm-anatop): 'clock-names' is a required property
     60  clock-controller@30360000 (fsl,imx8mp-anatop): 'clocks' is a required property
     60  clock-controller@30360000 (fsl,imx8mp-anatop): 'clock-names' is a required property
     36  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[35], [36], [37], [38], [39], [40]] is too short
     36  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[24], [25], [26], [27], [28], [29]] is too short
     32  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[34], [35], [36], [37], [38], [39]] is too short
     28  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[22], [23], [24], [25], [26], [27]] is too short
     26  clock-controller@30380000 (fsl,imx8mn-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
     17  clock-controller@30360000 (fsl,imx8mq-anatop): 'clocks' is a required property
     17  clock-controller@30360000 (fsl,imx8mq-anatop): 'clock-names' is a required property
     14  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[44], [45], [46], [47], [48], [49]] is too short
     14  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[23], [24], [25], [26], [27], [28]] is too short
     13  clock-controller@30360000 (fsl,imx8mn-anatop): 'clocks' is a required property
     13  clock-controller@30360000 (fsl,imx8mn-anatop): 'clock-names' is a required property
     12  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[26], [27], [28], [29], [30], [31]] is too short
     10  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[38], [39], [40], [41], [42], [43]] is too short
      8  clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[22], [23], [24], [25], [26], [27]] is too short
      8  clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[20], [21], [22], [23], [24], [25]] is too short
      8  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[34], [35], [36], [37], [38], [39]] is too short
      8  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[28], [29], [30], [31], [32], [33]] is too short
      8  bcrmf@1 (brcm,bcm4329-fmac): $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
      6  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[41], [42], [43], [44], [45], [46]] is too short
      6  clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[24], [25], [26], [27], [28], [29]] is too short
      4  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[43], [44], [45], [46], [47], [48]] is too short
      4  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[40], [41], [42], [43], [44], [45]] is too short
      4  clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[36], [37], [38], [39], [40], [41]] is too short
      4  clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[35], [36], [37], [38], [39], [40]] is too short

Please fix the binding or drop what's been applied so far.

Rob


  reply	other threads:[~2025-05-09 16:25 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-24  6:21 [PATCH v12 00/19] Support spread spectrum clocking for i.MX8M PLLs Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 01/19] dt-bindings: clock: imx8mm: add VIDEO_PLL clocks Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 03/19] dt-bindings: clock: imx8mp: " Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 05/19] dt-bindings: clock: imx8m-anatop: add oscillators and PLLs Dario Binacchi
2025-05-13 13:35   ` Krzysztof Kozlowski
2025-04-24  6:21 ` [PATCH v12 06/19] arm64: dts: imx8mm: add anatop clocks Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 07/19] arm64: dts: imx8mn: " Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 08/19] arm64: dts: imx8mp: " Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 09/19] arm64: dts: imx8mq: " Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 15/19] arm64: dts: imx8mp-aristainetos3a-som-v1: don't replicate clk properties Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 16/19] dt-bindings: clock: imx8m-clock: add PLLs Dario Binacchi
2025-05-09 16:25   ` Rob Herring [this message]
2025-05-09 18:22     ` Dario Binacchi
2025-05-13 13:24       ` Abel Vesa
2025-05-13 13:33         ` Krzysztof Kozlowski
2025-05-13 13:31       ` Krzysztof Kozlowski
2025-05-13 13:35   ` Krzysztof Kozlowski
2025-04-24  6:21 ` [PATCH v12 17/19] arm64: dts: imx8mm: add PLLs to clock controller module (CCM) Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 18/19] arm64: dts: imx8mn: " Dario Binacchi
2025-04-24  6:21 ` [PATCH v12 19/19] arm64: dts: imx8mp: " Dario Binacchi
2025-05-05  7:52 ` (subset) [PATCH v12 00/19] Support spread spectrum clocking for i.MX8M PLLs Abel Vesa
2025-05-08  8:32   ` Dario Binacchi
2025-05-09 12:01     ` Shawn Guo
2025-05-09 12:43       ` Dario Binacchi
2025-05-13 13:34         ` Krzysztof Kozlowski
2025-05-23 15:19   ` Dario Binacchi
2025-05-27 18:42     ` Krzysztof Kozlowski
2025-05-27 19:32       ` Dario Binacchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250509162546.GA3704130-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=abelvesa@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=dario.binacchi@amarulasolutions.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=peng.fan@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox