From: "Sheetal ." <sheetal@nvidia.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: <perex@perex.cz>, <tiwai@suse.com>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-sound@vger.kernel.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <spujar@nvidia.com>, <mkumard@nvidia.com>,
Sheetal <sheetal@nvidia.com>
Subject: [PATCH v3 05/11] ASoC: tegra: ASRC: Update ARAM address
Date: Mon, 12 May 2025 05:17:41 +0000 [thread overview]
Message-ID: <20250512051747.1026770-6-sheetal@nvidia.com> (raw)
In-Reply-To: <20250512051747.1026770-1-sheetal@nvidia.com>
From: Sheetal <sheetal@nvidia.com>
The ARAM address for Tegra264 has been updated. To maintain backward
compatibility given its chip-specific nature, it's now included in the
soc_data.
Signed-off-by: Sheetal <sheetal@nvidia.com>
---
sound/soc/tegra/tegra186_asrc.c | 18 ++++++++++++++----
sound/soc/tegra/tegra186_asrc.h | 12 ++++++++----
2 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/sound/soc/tegra/tegra186_asrc.c b/sound/soc/tegra/tegra186_asrc.c
index 5c67e1f01d9b..851509ae07f5 100644
--- a/sound/soc/tegra/tegra186_asrc.c
+++ b/sound/soc/tegra/tegra186_asrc.c
@@ -1,8 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: Copyright (c) 2022-2025 NVIDIA CORPORATION. All rights reserved.
//
// tegra186_asrc.c - Tegra186 ASRC driver
-//
-// Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved.
#include <linux/clk.h>
#include <linux/delay.h>
@@ -99,7 +98,7 @@ static int tegra186_asrc_runtime_resume(struct device *dev)
* sync is done after this to restore other settings.
*/
regmap_write(asrc->regmap, TEGRA186_ASRC_GLOBAL_SCRATCH_ADDR,
- TEGRA186_ASRC_ARAM_START_ADDR);
+ asrc->soc_data->aram_start_addr);
regmap_write(asrc->regmap, TEGRA186_ASRC_GLOBAL_ENB,
TEGRA186_ASRC_GLOBAL_EN);
@@ -954,8 +953,17 @@ static const struct regmap_config tegra186_asrc_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
+static const struct tegra_asrc_soc_data soc_data_tegra186 = {
+ .aram_start_addr = TEGRA186_ASRC_ARAM_START_ADDR,
+};
+
+static const struct tegra_asrc_soc_data soc_data_tegra264 = {
+ .aram_start_addr = TEGRA264_ASRC_ARAM_START_ADDR,
+};
+
static const struct of_device_id tegra186_asrc_of_match[] = {
- { .compatible = "nvidia,tegra186-asrc" },
+ { .compatible = "nvidia,tegra186-asrc", .data = &soc_data_tegra186 },
+ { .compatible = "nvidia,tegra264-asrc", .data = &soc_data_tegra264 },
{},
};
MODULE_DEVICE_TABLE(of, tegra186_asrc_of_match);
@@ -985,6 +993,8 @@ static int tegra186_asrc_platform_probe(struct platform_device *pdev)
return PTR_ERR(asrc->regmap);
}
+ asrc->soc_data = of_device_get_match_data(&pdev->dev);
+
regcache_cache_only(asrc->regmap, true);
regmap_write(asrc->regmap, TEGRA186_ASRC_GLOBAL_CFG,
diff --git a/sound/soc/tegra/tegra186_asrc.h b/sound/soc/tegra/tegra186_asrc.h
index 094fcc723c02..0c98e26d5e72 100644
--- a/sound/soc/tegra/tegra186_asrc.h
+++ b/sound/soc/tegra/tegra186_asrc.h
@@ -1,9 +1,7 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
+/* SPDX-License-Identifier: GPL-2.0-only
+ * SPDX-FileCopyrightText: Copyright (c) 2022-2024 NVIDIA CORPORATION. All rights reserved.
* tegra186_asrc.h - Definitions for Tegra186 ASRC driver
*
- * Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved.
- *
*/
#ifndef __TEGRA186_ASRC_H__
@@ -94,6 +92,7 @@
#define TEGRA186_ASRC_RATIO_SOURCE_SW 0x1
#define TEGRA186_ASRC_ARAM_START_ADDR 0x3f800000
+#define TEGRA264_ASRC_ARAM_START_ADDR 0x8a080000
struct tegra186_asrc_lane {
unsigned int int_part;
@@ -104,7 +103,12 @@ struct tegra186_asrc_lane {
unsigned int output_thresh;
};
+struct tegra_asrc_soc_data {
+ unsigned int aram_start_addr;
+};
+
struct tegra186_asrc {
+ const struct tegra_asrc_soc_data *soc_data;
struct tegra186_asrc_lane lane[TEGRA186_ASRC_STREAM_MAX];
struct regmap *regmap;
};
--
2.17.1
next prev parent reply other threads:[~2025-05-12 5:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 5:17 [PATCH v3 00/11] Add Tegra264 support in AHUB drivers Sheetal .
2025-05-12 5:17 ` [PATCH v3 01/11] dt-bindings: ASoC: admaif: Add missing properties Sheetal .
2025-05-14 21:46 ` Rob Herring (Arm)
2025-05-22 14:25 ` Krzysztof Kozlowski
2025-05-22 16:05 ` Sheetal .
2025-05-12 5:17 ` [PATCH v3 02/11] dt-bindings: ASoC: Document Tegra264 APE support Sheetal .
2025-05-12 5:17 ` [PATCH v3 03/11] ASoC: tegra: CIF: Add Tegra264 support Sheetal .
2025-05-12 5:17 ` [PATCH v3 04/11] ASoC: tegra: ADMAIF: " Sheetal .
2025-05-12 5:17 ` Sheetal . [this message]
2025-05-12 5:17 ` [PATCH v3 06/11] ASoC: tegra: Update PLL rate for Tegra264 Sheetal .
2025-05-12 5:17 ` [PATCH v3 07/11] ASoC: tegra: I2S: Add Tegra264 support Sheetal .
2025-05-12 5:17 ` [PATCH v3 08/11] ASoC: tegra: AMX: " Sheetal .
2025-05-12 5:17 ` [PATCH v3 09/11] ASoC: tegra: ADX: " Sheetal .
2025-05-12 5:17 ` [PATCH v3 10/11] ASoC: tegra: AHUB: " Sheetal .
2025-05-12 5:17 ` [PATCH v3 11/11] ASoC: tegra: Tegra264 support in isomgr_bw Sheetal .
2025-05-22 14:22 ` [PATCH v3 00/11] Add Tegra264 support in AHUB drivers Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250512051747.1026770-6-sheetal@nvidia.com \
--to=sheetal@nvidia.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mkumard@nvidia.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=spujar@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).