From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: quentin.schulz@cherry.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/6] Add two board-families from Theobroma-Systems
Date: Tue, 13 May 2025 17:02:28 +0200 [thread overview]
Message-ID: <20250513150234.2331221-1-heiko@sntech.de> (raw)
Both the Cobra and PP1516 boards are based around the PX30 SoC and can be
found with a variety of display options.
As new boards should not use the deprecated snps,reset-* properties
in the gmac node, I also added a core mdio-node for the gmac and
converted the Theobroma Ringneck board over.
Testing with the new node both before and after converting Ringneck
showed the board finding its network both when booting locally and
from the tftp/nfs.
changes in v2:
- add received Acks/Reviews
- drop "rockchip" prefix from system-power-controller (Diederik)
- split out prototype-pins to prototype variant
- address Quentin's review comments
- ethernet0 alias for Cobra
- a number more pinctrl entries for gpios
- drop unused slp pinctrl entries
- additional comments
- use gpio-constants for pmic int
- ordering (nodes + properties)
- clarify vccio_sd more
- interrupt line for pp1516 accelerometer
Heiko Stuebner (6):
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma
Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma
Systems
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
.../devicetree/bindings/arm/rockchip.yaml | 18 +
arch/arm64/boot/dts/rockchip/Makefile | 6 +
.../rockchip/px30-cobra-ltk050h3146w-a2.dts | 39 ++
.../dts/rockchip/px30-cobra-ltk050h3146w.dts | 39 ++
.../dts/rockchip/px30-cobra-ltk050h3148w.dts | 39 ++
.../dts/rockchip/px30-cobra-ltk500hd1829.dts | 73 +++
arch/arm64/boot/dts/rockchip/px30-cobra.dtsi | 566 +++++++++++++++++
.../rockchip/px30-pp1516-ltk050h3146w-a2.dts | 39 ++
.../dts/rockchip/px30-pp1516-ltk050h3148w.dts | 39 ++
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi | 599 ++++++++++++++++++
.../boot/dts/rockchip/px30-ringneck.dtsi | 22 +-
arch/arm64/boot/dts/rockchip/px30.dtsi | 6 +
12 files changed, 1482 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
--
2.47.2
next reply other threads:[~2025-05-13 15:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-13 15:02 Heiko Stuebner [this message]
2025-05-13 15:02 ` [PATCH v2 1/6] arm64: dts: rockchip: add basic mdio node to px30 Heiko Stuebner
2025-05-13 15:02 ` [PATCH v2 2/6] arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck Heiko Stuebner
2025-05-13 15:02 ` [PATCH v2 3/6] dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems Heiko Stuebner
2025-05-13 15:02 ` [PATCH v2 4/6] arm64: dts: rockchip: add px30-cobra base dtsi and board variants Heiko Stuebner
2025-05-14 9:19 ` Quentin Schulz
2025-05-14 13:39 ` Rob Herring
2025-05-14 14:56 ` Heiko Stübner
2025-05-13 15:02 ` [PATCH v2 5/6] dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems Heiko Stuebner
2025-05-13 15:02 ` [PATCH v2 6/6] arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants Heiko Stuebner
2025-05-14 9:37 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250513150234.2331221-1-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox